Foxfold Posted September 17, 2018 Report Share Posted September 17, 2018 As you all probably know , I'm pretty new to this scrolling world but already I'm 'flitting' from thing to thing. I've got a Word Art Pattern half done, then I got my new saw and decided to try something 'tiny' ( a small disc with Japanese emblem on it). Today I received my new Intarsia for Beginners book so I'm trying a simple Intarsia pattern. So I now have 3 things 'half' done,,,, now I know I'll finish them all eventually but, does anyone else flit from project to project or do you all totally finish one piece before moving to the next ? Just curious to see if I'm the only one OCtoolguy, lawson56, new2woodwrk and 2 others 2 1 2 Quote Link to comment Share on other sites More sharing options...
Chunkthekid Posted September 17, 2018 Report Share Posted September 17, 2018 I usually try to only have one scroll project going at once, but there usually a few other things I'm working on in the shop at the same time. I walk through the door and decide what I feel like messing with that day. That being said, when I do intarsia, I will usually cut a few small fret pieces while I avoid sanding. Foxfold, Jim Finn and OCtoolguy 2 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted September 17, 2018 Report Share Posted September 17, 2018 (edited) I usually have several things going. I don't call it "flitting", I just say I like to multi-process. Edited September 17, 2018 by Scrappile OCtoolguy, Foxfold and Jim Finn 3 Quote Link to comment Share on other sites More sharing options...
meflick Posted September 17, 2018 Report Share Posted September 17, 2018 Really depends on what I am working on. Like Paul, I prefer to say I multitask. they will all get done, it just depends on my mood. Plus, sometimes I just have to “think” about something for a bit before I complete it. Sometimes, I have to think longer then other times. OCtoolguy, jollyred and Foxfold 2 1 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted September 17, 2018 Report Share Posted September 17, 2018 YEAH!! I have a lot of PHD's ... ( Projects Half Done ) LOL I have some from like 5 years ago that I started but.. got side tracked with an order or this or that.. before you know it it's been years.. LOL.. While I only have a couple that are quite old.. most I finish within a few weeks.. This happens to me a lot because of my business.. (ie yesterday I made a new Christmas ornament pattern.. and couldn't wait to get started on it.. well wouldn't you know as soon as I started cutting it.. an order came in from my website.. which was a Made To Order item.. soooo... I stopped cutting my new ornament design.. and started making the clock that was ordered.. This morning I have the clock cut out along with about 6-8 other clocks.. I like to make clocks in batches so I'm drilling the recessed holes for the inserts all at the same drill press set-up. after I get done with my lunch break.. I'm going back out to drill those holes and then make up a batch of clock bases and then mount the bases to the clocks and then dip in Danish oil... then I'll get back to my ornament cutting... provided no other orders that needs making comes in, LOL Foxfold and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
tomsteve Posted September 17, 2018 Report Share Posted September 17, 2018 typically only one scrollsaw project at a time but it is very rare that i dont have some other project going on,too- watching glue dry is rather boring so i have to occupy my time. OCtoolguy, kmmcrafts, Foxfold and 1 other 2 2 Quote Link to comment Share on other sites More sharing options...
JTTHECLOCKMAN Posted September 17, 2018 Report Share Posted September 17, 2018 I have a ton of projects started and more in the pipeline. But when getting ready for shows I lay out the work or projects and try to do all the cutting and then do all the sanding and then do all the finishing and then do all the assembling so I like to work in stages. After that it is a crap shoot as to what I work on next. Usually some pen turning and blank making ideas. Try to keep busy. That is my story and I am sticking to it. OCtoolguy and Foxfold 1 1 Quote Link to comment Share on other sites More sharing options...
Foxfold Posted September 17, 2018 Author Report Share Posted September 17, 2018 1 hour ago, kmmcrafts said: then I'll get back to my ornament cutting... provided no other orders that needs making comes in, LOL Wow, I was never that busy when I was working. I admire your stamina OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Foxfold Posted September 17, 2018 Author Report Share Posted September 17, 2018 39 minutes ago, JTTHECLOCKMAN said: I have a ton of projects started and more in the pipeline. But when getting ready for shows I lay out the work or projects and try to do all the cutting and then do all the sanding and then do all the finishing and then do all the assembling so I like to work in stages. After that it is a crap shoot as to what I work on next. Usually some pen turning and blank making ideas. Try to keep busy. That is my story and I am sticking to it. I'm just a 'hobby' cutter, at least you have a reason to do it the way you do, me? I have the attention span of a gnat. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Foxfold Posted September 17, 2018 Author Report Share Posted September 17, 2018 1 hour ago, Scrappile said: I usually have several things going. I don't call it "flitting", I just say I like to multi-process. There you go, I now have a new title. AMP, A Multi - Processer BLULOU and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
loftyhermes Posted September 17, 2018 Report Share Posted September 17, 2018 I do one project at a time, easier that way, saves confusing myself or forgetting to do something on one till it's too late. DAMHIKT OCtoolguy and Foxfold 2 Quote Link to comment Share on other sites More sharing options...
Phantom Scroller Posted September 17, 2018 Report Share Posted September 17, 2018 I can't move in my shop for moving around half done jobs. You not alone. Roly Foxfold and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
WayneMahler Posted September 17, 2018 Report Share Posted September 17, 2018 I normally have multiple projects going on . I'll take a rest from one or get another order for something and that adds to the list. Foxfold and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
Foxfold Posted September 17, 2018 Author Report Share Posted September 17, 2018 (edited) 2 hours ago, WayneMahler said: I normally have multiple projects going on . I'll take a rest from one or get another order for something and that adds to the list. I'm never likely to 'have an order' so perhaps I'm ok just 'flitting' Edited September 17, 2018 by Foxfold OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
crupiea Posted September 17, 2018 Report Share Posted September 17, 2018 I like to finish them. i can get 3 going at once as I have that many workstations. That of course does not man that I dont lose interest in pieces halfway through. My main problem is I will underestimate the difficulty and number of cuts and they halfway into it and just get sick of it. I will set it aside and start something i can get some quicker satisfaction out of. I will eventually get back to those pieces, just might take some time and of course they are now hogging up valuable bench space so I need to address them. Foxfold 1 Quote Link to comment Share on other sites More sharing options...
Fish Posted September 17, 2018 Report Share Posted September 17, 2018 I always have a couple things going. I work on what I’m in the mood for. I need this sweatshirt. Foxfold, crupiea, Phantom Scroller and 3 others 3 3 Quote Link to comment Share on other sites More sharing options...
lawson56 Posted September 17, 2018 Report Share Posted September 17, 2018 I normally finish what I'm working on.But there have been times when I start a couple of things. Foxfold 1 Quote Link to comment Share on other sites More sharing options...
new2woodwrk Posted September 18, 2018 Report Share Posted September 18, 2018 When I started I did the exact same thing - I've only been scrolling less than a year now, but I've learned that having multiple projects are sometimes ok. For example: I may start and cut one of my puzzle projects, but not get to apply the finish for months I've started a few plates with a lot of fretwork, and leave them when I get bored with the holes and small cuts and move on to a silhouette so I have a finished cut piece. I often have 4 or more projects waiting for either a pre-stain/stain, dye or more often than not a frame. I like making my own frames and often I'll line up 4 or more cut projects and leave the cutting until I've made a bunch of frames So basically you're not alone LOL Foxfold 1 Quote Link to comment Share on other sites More sharing options...
bandaideman Posted September 18, 2018 Report Share Posted September 18, 2018 I do not flit I suffer from ADWW ( Attention Deficit Wood Worker) I kind of will work on one thing lose interest then move to something else etc. Actually can finish three different things on the same day but may have started them all 2 weeks before. What can I say it works for me. Also will work in orders should they come along but then can focus since I will get paid so I can continue my hobby. I have tried many remedies but none seem to work well, chewing on tooth picks helps some. Foxfold 1 Quote Link to comment Share on other sites More sharing options...
John B Posted September 18, 2018 Report Share Posted September 18, 2018 I always seem to have about a half dozen things on the go. I'll start another while waiting for glue to go off, or for the lacquer or flocking to dry. And then thee's the shelf with all the great ideas, that are just waiting for another idea to come along to correct the 1st idea Foxfold 1 Quote Link to comment Share on other sites More sharing options...
meflick Posted September 18, 2018 Report Share Posted September 18, 2018 17 hours ago, Fish said: I always have a couple things going. I work on what I’m in the mood for. I need this sweatshirt. Well @Fish, I'm figuring it would be better to say I have mastered my PHD (projects half done) given the number of PHDs many of us probably have. Fish and John B 2 Quote Link to comment Share on other sites More sharing options...
fredfret Posted September 18, 2018 Report Share Posted September 18, 2018 In the past month I have finished 5 projects. 1 was started in 2009, 2 started in 2017 ant the other 2 were started and finished the same week. No idea how many projects were done since 2009 but I do know that I cut over 500 cars for kids in the last 2 years. I "frit" Fredfret meflick 1 Quote Link to comment Share on other sites More sharing options...
BLULOU Posted September 18, 2018 Report Share Posted September 18, 2018 On 9/17/2018 at 5:01 PM, Fish said: I always have a couple things going. I work on what I’m in the mood for. I need this sweatshirt. Got the same saying on a teeshirt Quote Link to comment Share on other sites More sharing options...
Jim McDonald Posted September 18, 2018 Report Share Posted September 18, 2018 22 hours ago, John B said: I always seem to have about a half dozen things on the go. I'll start another while waiting for glue to go off, or for the lacquer or flocking to dry. And then thee's the shelf with all the great ideas, that are just waiting for another idea to come along to correct the 1st idea 12 times zones away and I the same thing. Various projects in various stages of completion. John B 1 Quote Link to comment Share on other sites More sharing options...
wombatie Posted September 19, 2018 Report Share Posted September 19, 2018 I always finish the one I am cutting before starting the next. Painting and oil finish not included. I have a bit of OCD I think. Marg meflick 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.