Rockytime Posted October 7, 2018 Report Share Posted October 7, 2018 Rather than hijack another thread I thought I wad start another. I have never cut live edge anything so I know nothing about it. Where do you buy it? How does one keep the bark from falling off? Are some woods better for keeping their bark attached? I'd like to try some. The finished pieces posted here are beautiful OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
fredfret Posted October 7, 2018 Report Share Posted October 7, 2018 Most hobby stores like hobby lobby and Michael's sell rounds for wood burning that are cut from basswood. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted October 7, 2018 Author Report Share Posted October 7, 2018 Hobby Lobby is close to me. Thank you. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
savethebeer Posted October 7, 2018 Report Share Posted October 7, 2018 Hello Les. Also only on my first piece of live edge. My current piece of basswood is one inch thick and I'm sure the bark grew on this piece because it does not appear to have been stuck back on. I have about 50 slices of a branch where I cut the branch into very thin slices and have pencilled them in for Xmas tree hangers, but what I have noticed is the wood is shrinking as it dries out meaning the full circle of bark on each slice is separating from the wood in spots. I'm hoping the much thicker basswood wont have the same problem. Bob OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted October 7, 2018 Report Share Posted October 7, 2018 The live edge stuff I have is from the sawmill next door.. and my brothers sawmill from up the road.. They was green when I was given the pieces about 5 years ago.. I've had these stickered up in the loft all this time.. Many of these have shrunk and the bark has peeled off and or.. many of them split too.. I'll be able to use them for some projects anyway.. and I actually saved them from being turned into wood chips.. I have some BIG 4-5 inch thick pieces that I have no idea what I'll do with them.. some are 20+ inch wide.. hate to cut them down to fit through my little 13" planer.. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
jerry1939 Posted October 8, 2018 Report Share Posted October 8, 2018 We have it Hobby Lobby, but it doesn't interest me because of all the blemishes. jerry OCtoolguy and Rockytime 1 1 Quote Link to comment Share on other sites More sharing options...
Don F Posted October 8, 2018 Report Share Posted October 8, 2018 I do a lot of wood turning .Was told that wood cut in winter when sap was down the bark would stay on better. the other thing is a lot of CA glue OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
poupster2 Posted October 9, 2018 Report Share Posted October 9, 2018 There are many saw mills that give away slabs that you can do some nice live edges with!!! I found a few on craigslist. For keeping the bark on ... CA glue is the way to go!!! OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
crupiea Posted October 10, 2018 Report Share Posted October 10, 2018 Too bad they dont just sell bark that we could just glue on. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted October 10, 2018 Report Share Posted October 10, 2018 9 minutes ago, crupiea said: Too bad they dont just sell bark that we could just glue on. My brother owns a sawill business.. and yes he does sell the bark.. LOL... there is no such thing as scrap in the mill business.. he sells the shredded bark.. slabwood for fire wood.. and anything that doesn't make slab wood sawdust or lumber gets run through the chipper and he sell the wood chips.. though last I talked to him sawdust was paying more than woodchips so he was grinding it into sawdust. OCtoolguy and tomsteve 1 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted October 10, 2018 Report Share Posted October 10, 2018 Ok, I've gotta ask,.....what is a "live edge"? Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted October 10, 2018 Report Share Posted October 10, 2018 7 minutes ago, octoolguy said: Ok, I've gotta ask,.....what is a "live edge"? Ray live edge is just a natural edge of the wood.. ( ie saw the log into lumber without cutting the edges off.. so the outer part of the tree with the bark is still on the lumber ) well actually the bark doesn't have to be attached to be live edge.. but just have the natural slab.. rather than the lumber being squared up into a dimensional board.. This piece I cut out a few days ago is on a live edge slab.. notice the edges are natural tree's edge rather than a squared off 1 x 12 or whatever size I think most of what the hobby stores carry are smaller pieces.. and rather than cutting the length of the log they are cut through the log as in like firewood is cut.. except in small 1" slices, LOL still live edge though.. just different cuts... sort of like sirloin or porterhouse Hahaha.. OCtoolguy and tomsteve 1 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted October 11, 2018 Report Share Posted October 11, 2018 I gotta ask, why do you refer to it as "live edge"? It is dead! I call it natural edge or bark edge. When I use a piece I will but CA glue along the bark on the back edge and CA any loose pieces on. When you put finish on after cutting a picture, the CA will not show. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted October 11, 2018 Report Share Posted October 11, 2018 28 minutes ago, Scrappile said: I gotta ask, why do you refer to it as "live edge"? It is dead! I call it natural edge or bark edge. When I use a piece I will but CA glue along the bark on the back edge and CA any loose pieces on. When you put finish on after cutting a picture, the CA will not show. Have no idea why I refer it as live edge.. guess it's how it was refereed too as I was introduced to it.. Maybe I should call it Dead edge.. .. If you google live edge wood.. it brings up what you call natural edge.. but then... so does natural edge, LOL OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted October 11, 2018 Report Share Posted October 11, 2018 I think most refer to it as "live edge". It just always puzzled me. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted October 11, 2018 Author Report Share Posted October 11, 2018 Call it the way dog does, BARK OCtoolguy and kmmcrafts 2 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.