Jump to content
🎄 🎄 🎄 Ornaments For Charity 2024 - 545 FREE Ornament Patterns - NOW AVAILABLE! ×

Another DW788 Lift Arm


Heli_av8tor

Recommended Posts

Here's my version of a lift arm for the DeWalt DW788. I know, how many ways are there to skin a cat. I wanted something very simple to build and use.

This design features a tapered catch that slides under the existing plastic housing by the speed control. The arm (1/8" x 1" aluminum) is positioned so that the latch pin normally sets about 3/8" away from the black plastic housing. The arm can be raised or lowered without interference. With the arm fully raised the latch pin clears the housing just enough to allow it to be pushed left to contact the yellow arm.

To latch the arm in the up position simply raise the arm with an up-turned right hand and use the thumb to push the lift arm to the left. Allow the arm to come down and trap the latch pin under the housing. To lower the arm simply lift it up and the latch pin pops away from the housing allowing the arm to drop.

The latch pin is a 1/4" x 20 flat head phillips screw. I'm sure it could have been used as is but I decided to turn a shoulder at the base of the head. This eliminates wedging the housing between the screw head and the nut.

The mounting holes in the lift need to be positioned accurately to keep the arm as high as possible but still allow the latch pin to clear the housing. The arm only droops about 1/8" when held up by the lift.

IMG_7832.JPG

IMG_7833.JPG

IMG_7827.JPG

IMG_7828.JPG

IMG_7829.JPG

IMG_7831.JPG

Link to comment
Share on other sites

  • 1 month later...

You wonder why Dewalt never added something to their saws. At least give people the option to have the arm lift automatically or disengage it and let it drop like it does now. After awhile that arm does get heavy. most saws they lift automatically. Still love my RBI. More and more each day and I did not think that was possible. Anyone ever asks me what saw to buy?? Without hesitation an RBI!!!!!!!!!!!!!!!!! Best saw on the market.

Link to comment
Share on other sites

After reading about all the Dewalt lift arm issues, I must be the odd man out. I've never lifted the arm to remove/move a blade. I've always just removed the blade top and bottom. I feed through the top, tighten the bottom thumb screw first then the top. I never look under the table. Am I the only Dewalt user that does This? Seems so much easier than wrestling with a lift arm. Becomes second nature in no time and pretty fast at it.

Link to comment
Share on other sites

On 12/21/2018 at 2:30 PM, JTTHECLOCKMAN said:

You wonder why Dewalt never added something to their saws. At least give people the option to have the arm lift automatically or disengage it and let it drop like it does now. After awhile that arm does get heavy. most saws they lift automatically. Still love my RBI. More and more each day and I did not think that was possible. Anyone ever asks me what saw to buy?? Without hesitation an RBI!!!!!!!!!!!!!!!!! Best saw on the market.

There really is  no need to wonder John because it is the engineers and the bean counters.   There must be some Dewalt owners that feel a lift arm is useful otherwise there wouldn't be models on the market like the Jim Dandy lifter.    Just like I have stated in other posts once a scroll saw is on the market the manufacturers  just can't seem to admit any issue and then there are the beans counters.  Oh and by the way I have never test drove a Hawk but they would probably be my choice for a new saw.         

Link to comment
Share on other sites

  • 5 years later...
On 11/18/2018 at 1:08 PM, Heli_av8tor said:

Here's my version of a lift arm for the DeWalt DW788. I know, how many ways are there to skin a cat. I wanted something very simple to build and use.

This design features a tapered catch that slides under the existing plastic housing by the speed control. The arm (1/8" x 1" aluminum) is positioned so that the latch pin normally sets about 3/8" away from the black plastic housing. The arm can be raised or lowered without interference. With the arm fully raised the latch pin clears the housing just enough to allow it to be pushed left to contact the yellow arm.

To latch the arm in the up position simply raise the arm with an up-turned right hand and use the thumb to push the lift arm to the left. Allow the arm to come down and trap the latch pin under the housing. To lower the arm simply lift it up and the latch pin pops away from the housing allowing the arm to drop.

The latch pin is a 1/4" x 20 flat head phillips screw. I'm sure it could have been used as is but I decided to turn a shoulder at the base of the head. This eliminates wedging the housing between the screw head and the nut.

The mounting holes in the lift need to be positioned accurately to keep the arm as high as possible but still allow the latch pin to clear the housing. The arm only droops about 1/8" when held up by the lift.

IMG_7832.JPG

IMG_7833.JPG

IMG_7827.JPG

IMG_7828.JPG

IMG_7829.JPG

IMG_7831.JPG

What is the name of the thing that rests under the black plastic to actually hold the arm?

Link to comment
Share on other sites

I wonder,,, (oh oh here we go), if you extended that piece of metal (the red piece) further in the back and attached a spring to it, you could make it so when you release the blade from the clamp the arm would  automatically go up and stay like a Hegner does.  I would not try it on any saw I had.   But maybe some brave sole out there might.

Link to comment
Share on other sites

1 hour ago, Scrappile said:

I wonder,,, (oh oh here we go), if you extended that piece of metal (the red piece) further in the back and attached a spring to it, you could make it so when you release the blade from the clamp the arm would  automatically go up and stay like a Hegner does.  I would not try it on any saw I had.   But maybe some brave sole out there might.

That arm is pretty heavy so it would take a hefty spring. But....worth a try.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...