lawson56 Posted November 24, 2018 Report Share Posted November 24, 2018 I haven't bought a new saw yet,Been looking at many different brands,I don't have a big budget,I am not going to buy another Porter Cable,I have been reading the reviews on the Delta,Which is closer to my budget.Has anyone here ever used or uses one,Please give opinion on how it runs,and holds up. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
NC Scroller Posted November 24, 2018 Report Share Posted November 24, 2018 The problem with Delta is the lack of repair support and spare parts. It is only a shell of a company that it used to be. OCtoolguy and lawson56 2 Quote Link to comment Share on other sites More sharing options...
ike Posted November 24, 2018 Report Share Posted November 24, 2018 (edited) I had a dewalt 788 and it hit the dust after 5 years oldso when I bought I bought a Delta and have used it for one summer and have no problems with it. the only gripe I have had is that the speed keeps slowing down U set it on 6 and it keeps moving back to about a 4 I can tell when it slowed down and I move it back to a 6 I bought it thru Loews and will take it back to them for repairs.n It is not as aggressive as the Dewalt and it takes a little longer to do a job. IKE Edited November 24, 2018 by ike lawson56 and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
orangeman Posted November 24, 2018 Report Share Posted November 24, 2018 Been running my Delta scroll saw for 6 months now and no problems. When my DeWalt died, I replaced it with the Delta. 5 yr warranty! vs DeWalt's 1 yr. I checked Delta service centers and there is one 15 miles away. Just go to the Delta site and enter your zip to find service centers. bb OCtoolguy and lawson56 2 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted November 24, 2018 Report Share Posted November 24, 2018 Before I'd buy any saw brand new, I'd search out Craigslist. Keep an eye on it and watch for a deal to come along. I have had 3 saws so far. All bought used that way. A Dewalt, a Hegner and an Excalibur. I haven't paid more than $300 for any one of them. lawson56 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted November 24, 2018 Report Share Posted November 24, 2018 Here is an example of what I'm talking about. https://orangecounty.craigslist.org/tls/d/dewalt-scroll-saw-for-sale-or/6753873631.html lawson56 1 Quote Link to comment Share on other sites More sharing options...
jerry1939 Posted November 24, 2018 Report Share Posted November 24, 2018 I have a Delta 40-694. Pleased with it, however, our Iowa garage isn't heated, so every fall I grease all the bearings and let it hibernate over winter. As for the "lack of parts", with the probable exception of the motor, it looks like 788 & Delta parts are the same. Would bet that if you ever needed parts for a Delta, you just buy for a Dewalt, jerry lawson56 and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
lawson56 Posted November 24, 2018 Author Report Share Posted November 24, 2018 Thanks for all the info,It has given a lot to think about. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
JAC1961 Posted November 25, 2018 Report Share Posted November 25, 2018 4 hours ago, octoolguy said: Before I'd buy any saw brand new, I'd search out Craigslist. Keep an eye on it and watch for a deal to come along. I have had 3 saws so far. All bought used that way. A Dewalt, a Hegner and an Excalibur. I haven't paid more than $300 for any one of them. I second Ray's post. I see older Hegners at silly low prices quite often. You might have to be patient or drive a ways, but good deals on quality tools are available. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted November 25, 2018 Report Share Posted November 25, 2018 13 minutes ago, JAC1961 said: I second Ray's post. I see older Hegners at silly low prices quite often. You might have to be patient or drive a ways, but good deals on quality tools are available. Did you see the one I posted a while ago? A Hegner with all the upgrades for $150. I'm tempted to go buy it just to resell it. JAC1961 and lawson56 2 Quote Link to comment Share on other sites More sharing options...
JAC1961 Posted November 25, 2018 Report Share Posted November 25, 2018 1 minute ago, octoolguy said: Did you see the one I posted a while ago? A Hegner with all the upgrades for $150. I'm tempted to go buy it just to resell it. Don't think I did, but I'm so tempted to buy one of the ones that I've seen. I don't use my Dewalt enough (yet) or have floor space to justify it, but it sure is tempting. Maybe if I'd sell some lumber... Nah! OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted November 25, 2018 Report Share Posted November 25, 2018 2 minutes ago, JAC1961 said: Don't think I did, but I'm so tempted to buy one of the ones that I've seen. I don't use my Dewalt enough (yet) or have floor space to justify it, but it sure is tempting. Maybe if I'd sell some lumber... Nah! I'm sorry. I don't know what happened but I know I posted the link earlier. Check it out now. I just reposted it. JAC1961 1 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted November 25, 2018 Report Share Posted November 25, 2018 Also agree with Ray.. all of my saws other than my DeWalt was bought from facebook marketplace and or craigslist... most expensive saw was the still new boxed Hawk 226VS Ultra.. paid $400 for that.. $360 for my new still boxed Excalibur EX21 and $100 for my Hawk 220VS.. so for less than a new Hawk.. I bought three saw all higher end saws.. That said.. If you really want new.. ( I love to buy new now and then and understand how the feel of being able to return the saw no questions asked too) I wouldn't be scared to buy the Delta.. In fact when I started my hunt for a back-up saw.. I was seriously looking at the Delta.. until I found that first $100 Hawk. then the second popped up even though I wasn't really looking.. couldn't pass it up.. being new in the box.. then the EX showed up.. now I don't need any new / used saws for quite a long time I don't think.. The Delta saw I feel is a good saw..and I do think the parts are pretty much the same as DeWalt.. I'd buy the Delta in a heartbeat if I was looking for new and on a budget.. even though I don't like the NEW delta company as they do seem to discontinue parts and do things I don't think is really right.. seems to be the way most companies these days are.. OCtoolguy and lawson56 1 1 Quote Link to comment Share on other sites More sharing options...
lawson56 Posted November 25, 2018 Author Report Share Posted November 25, 2018 Thanks again for all your info guys.Today is my last sale of the yr.I am hoping to good enough to at least put what I make with what I have and buy me a new saw.Keeping my fingers crossed. Scruffydog and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
lawson56 Posted November 25, 2018 Author Report Share Posted November 25, 2018 Well,didn't do so hot today.The buyers just wasn't there.I did make some money.I will put that aside and wait till I have enough to buy me a really good saw.So I wont be cutting for awhile. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted November 26, 2018 Report Share Posted November 26, 2018 7 hours ago, lawson56 said: Well,didn't do so hot today.The buyers just wasn't there.I did make some money.I will put that aside and wait till I have enough to buy me a really good saw.So I wont be cutting for awhile. Just keep watching C/L. One will turn up. lawson56 1 Quote Link to comment Share on other sites More sharing options...
Scruffydog Posted January 30, 2019 Report Share Posted January 30, 2019 (edited) I just received my Delta, and with it a booklet containing a complete parts list and exploded view drawings. A quick Google search reveals at least two companies that handle parts online. I searched for parts and my test parts were available. 9 service centers within 1.5 hours of me, the closest being 45 minutes. And I live in the boonies! I did all this b4 deciding to buy my saw. But I am also keeping my old saw just in case, and will probably keep looking at CL for a bargain just to use as a power file or sander. My 2 cents. https://www.ereplacementparts.com/delta-40694-variable-speed-scroll-saw-parts-c-3275_3505_418339.html Edited January 30, 2019 by Scruffydog OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
ScollSaw Slasher Posted January 30, 2019 Report Share Posted January 30, 2019 Congrats. It's the saw I use and have no regrets in the purchase. Did grease the bearings about a year ago. Maybe one of these days I will fork over the big bucks, but still can't justify that. OCtoolguy and Scruffydog 2 Quote Link to comment Share on other sites More sharing options...
neal560sl Posted January 30, 2019 Report Share Posted January 30, 2019 I bought a Delta 40-694 around the first of December and so far, I love it. Scruffydog and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
scrollntole Posted January 31, 2019 Report Share Posted January 31, 2019 Just a quick note - I have a Delta and have enjoyed using it now for two-and-a-half years. Trouble free. (And I hope it stays that way!!) I recommend it. I've owned only one other saw, a starter type, and I'm very glad I've moved on up to this unit. Vin OCtoolguy and Scruffydog 2 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.