Popular Post tomsteve Posted November 28, 2018 Popular Post Report Share Posted November 28, 2018 i found alex fox patterns on etsy . pretty awesome pattern makers. found these layered bells and thought of a couple people that may like em for christmas. soooo- there i go! making them with 1/8" BB ply, i THOUGHT:' i want to make 3 of these. 4 layers=12 pieces. lets see if i can stack all 12. cut the bottom layer,remove 3, cut the next, and so on." that worked for about 1 1/2" of cut.apparently no blades i have care for 1 1/2" of 1/8" ply to cut. that only about 36 ply! pulled 3 off the bottom so only 9 layers of 1/8". made it to where the last set of 3 and isnt cut and conceded that 9 is too much for me. todays project- get them last 3 cut then do something i very,very rarely do with scrollsaw work- paint. all in all, these are some pretty nice patterns and easy to cut-just not in 36 ply. Phantom Scroller, jollyred, lawson56 and 7 others 9 1 Quote Link to comment Share on other sites More sharing options...
bobscroll Posted November 28, 2018 Report Share Posted November 28, 2018 Hi Tom, Looking good! Something nice for Christmas, Thank you for showing, Bob OCtoolguy and tomsteve 2 Quote Link to comment Share on other sites More sharing options...
Foxfold Posted November 28, 2018 Report Share Posted November 28, 2018 Well, it goes to show. You learn something new everyday. Never a 'mistake' just a learning curve. My mother used to say ''More haste, less speed''. They'll look great when they they're done tomsteve, OCtoolguy and wombatie 3 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted November 28, 2018 Report Share Posted November 28, 2018 Yeah, gets tough when you add up those layers.. When I make my wall hang clocks.. I stack cut 5 1/8 BB ply which goes great.. but I also like to cut my backers 1/4" solid walnut or ply depending on what I have on hand.. so I end up stacking the 5 1/8" BB ply and 5 1/4" walnut ply together.. It's pretty slow going but sure is nice that it's only cutting the outside of the clocks.. I'd never do that if it was inside cuts too, LOL Takes almost as long to cut the outside part as it does doing all the detail fretwork OCtoolguy and tomsteve 2 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted November 28, 2018 Report Share Posted November 28, 2018 You have done an admirable job! OCtoolguy and tomsteve 2 Quote Link to comment Share on other sites More sharing options...
Phantom Scroller Posted November 28, 2018 Report Share Posted November 28, 2018 Show the finished item. good so far. Roly tomsteve and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted November 28, 2018 Report Share Posted November 28, 2018 Very nice work and good info for those of us who are newbies. tomsteve 1 Quote Link to comment Share on other sites More sharing options...
tomsteve Posted November 30, 2018 Author Report Share Posted November 30, 2018 got em done! these are pretty sweet and should make nice christmas presents. and gave myself a repair job- knocked this off the wall today. must wake up before trying stairs. spotsdad, OCtoolguy, meflick and 1 other 3 1 Quote Link to comment Share on other sites More sharing options...
tomsteve Posted November 30, 2018 Author Report Share Posted November 30, 2018 closer up pic. OCtoolguy and Phantom Scroller 1 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted November 30, 2018 Report Share Posted November 30, 2018 34 minutes ago, tomsteve said: closer up pic. Very nice job of scrolling and painting. I like them. Did you buy the pattern or was it a freebie? tomsteve 1 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted November 30, 2018 Report Share Posted November 30, 2018 You have done a GREAT job. Beautiful! OCtoolguy and tomsteve 2 Quote Link to comment Share on other sites More sharing options...
JTTHECLOCKMAN Posted November 30, 2018 Report Share Posted November 30, 2018 Wow those ornaments stand out when painted like that. That is a seller. More work but worth it for sure. Thanks for showing. OCtoolguy and tomsteve 2 Quote Link to comment Share on other sites More sharing options...
Toothpick Posted December 1, 2018 Report Share Posted December 1, 2018 Wow those look great. Very clean corners. One day I’ll get corners like that! tomsteve and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
wombatie Posted December 1, 2018 Report Share Posted December 1, 2018 We all live and learn Tom. But boy they came out great. Give yourself a pat on the back. Marg tomsteve and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
tomsteve Posted December 1, 2018 Author Report Share Posted December 1, 2018 20 hours ago, octoolguy said: Very nice job of scrolling and painting. I like them. Did you buy the pattern or was it a freebie? i found the pattern on etsy. https://www.etsy.com/shop/AlexFoxUA?ref=l2-shopheader-name he has some pretty awesome patterns. good news this morning: i didnt knock anything off the walls when i woke up- YAY ME!!! Quote Link to comment Share on other sites More sharing options...
Tomanydogs Posted December 1, 2018 Report Share Posted December 1, 2018 Tom I love these. Great colour choice. Quote Link to comment Share on other sites More sharing options...
Scrappile Posted December 1, 2018 Report Share Posted December 1, 2018 Boy those really pop! Very nice. Spoiler Quote Link to comment Share on other sites More sharing options...
Phantom Scroller Posted December 5, 2018 Report Share Posted December 5, 2018 Great looking bells . Roly Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.