DavidC Posted December 15, 2018 Report Share Posted December 15, 2018 After six months of learning and practicing with my scroll saw, I decided to tackle a big project and a Chritmas gift for my wife. My concern was cutting straight lines. For my previous projects I milled my own wood to size. For this project I wanted to use 1/2" Cherry with a Maple base. Right off the bat I started dealing with cupping which made it a lot more difficult to cut. Lessons learned from that. My best decision was to try the Pegasus modified reverse tooth blade. I cut the entire project with the 0/2. They did a great job of tracking a straight line. Anyway I'm pretty happy with the way it turned out. Thanks to Steve Good for the plans! amazingkevin 1 Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted December 18, 2018 Report Share Posted December 18, 2018 Well now,Let's see the proud project !!! Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.