Popular Post Wichman Posted January 1, 2019 Popular Post Report Posted January 1, 2019 My latest; a small heart box. the lid has a sliding dovetail joint holding it to the box and a heart shaped pin keeping the lid from sliding by itself. MTCowpoke22, John B, frankorona and 13 others 15 1 Quote
Foxfold Posted January 1, 2019 Report Posted January 1, 2019 Wonderful work, I love it xx Wichman 1 Quote
Rockytime Posted January 1, 2019 Report Posted January 1, 2019 WOW! How do you do that? Wichman 1 Quote
heppnerguy Posted January 1, 2019 Report Posted January 1, 2019 that is a nice little box, would have liked to see the side of it also. Dick heppnerguy Wichman 1 Quote
Wichman Posted January 2, 2019 Author Report Posted January 2, 2019 2 hours ago, heppnerguy said: that is a nice little box, would have liked to see the side of it also. Dick heppnerguy heppnerguy 1 Quote
Wichman Posted January 2, 2019 Author Report Posted January 2, 2019 I just added a small magnet to the bottom of the hole for the pin, then drilled 1/16 holes in the end of the pin and pressed in a short length of steel rod. The pin is now held in place by the magnet. The goal is to have a rod with a magnet in the end (a magic wands) required to be able to remove the pin. Quote
Toothpick Posted January 2, 2019 Report Posted January 2, 2019 Wish I was that clever. Nice one! Wichman 1 Quote
wombatie Posted January 2, 2019 Report Posted January 2, 2019 Awesome. Would make a great ring box. Well done. Marg Wichman 1 Quote
Wichman Posted January 3, 2019 Author Report Posted January 3, 2019 On 1/1/2019 at 2:06 PM, Rockytime said: WOW! How do you do that? Is this a serious question? It's not that hard (well the 1 1/2 deep cuts) but the parts HAVE to be cut in a specific order. Quote
Tomanydogs Posted January 4, 2019 Report Posted January 4, 2019 That is so very clever and very pretty. Well done. Wichman 1 Quote
rdatelle Posted January 4, 2019 Report Posted January 4, 2019 Great work on that. I would never have known it was that small if you didn't have that quarter next to it. Quote
Wichman Posted January 9, 2019 Author Report Posted January 9, 2019 VID_20190108_204944.mp4 Rob 1 Quote
Wichman Posted January 14, 2019 Author Report Posted January 14, 2019 VID_20190108_204944.mp4 Well I think I've taken this to a higher level than I thought possible, The pin pulls out and is a key . Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.