Popular Post Robert j walker Posted February 9, 2019 Popular Post Report Share Posted February 9, 2019 Well I plow snow for a liven and I don't get to play in the shop much during the snow season. But once in a while something comes up that gets me in there. A retired coworker sent his sister in law to see me. She was expecting their first grand child and really wanted to have a sign in plaque made before the baby shower which was only a few days before the baby was supposed to be here. I told her I would try to get it done for her but lets pray for no snow. Well she must have done just that because I had just enough time to get it done for her. Well I'm happy to say the parents loved it and they had a beautiful baby girl and they are bringing it back to me to put her name and date on it. I love when people get excited over stuff that I make. Scrappile, Rockytime, spotsdad and 7 others 10 Quote Link to comment Share on other sites More sharing options...
Popular Post Rolf Posted February 9, 2019 Popular Post Report Share Posted February 9, 2019 I have don three one I already posted under just for fun. The other two are projects for the SSWWC magazine I can't post those yet but they are pretty cool. I have also been busy restoring a Heron chain saw carving that we bought at a Fox Chapel open house in 2014. It is outside all summer long so it needed sprucing up. I brought it back to this. Travis, Goat, wombatie and 9 others 12 Quote Link to comment Share on other sites More sharing options...
Popular Post Greg Slagle Posted February 12, 2019 Popular Post Report Share Posted February 12, 2019 Better late than never... My first project of 2019... Not sure if I should frame it or just leave it as is... bcdennis, RabidAlien, Scruffydog and 12 others 15 Quote Link to comment Share on other sites More sharing options...
RabidAlien Posted February 14, 2019 Report Share Posted February 14, 2019 Nice!!!!! Greg Slagle 1 Quote Link to comment Share on other sites More sharing options...
Popular Post tneilitz Posted February 14, 2019 Popular Post Report Share Posted February 14, 2019 This a potpourri bowl made from maple and purple heart. Is is a Steve Good design. Travis, scrollergirl, Tomanydogs and 14 others 16 1 Quote Link to comment Share on other sites More sharing options...
Foxfold Posted February 14, 2019 Report Share Posted February 14, 2019 1 hour ago, tneilitz said: This a potpourri bowl made from maple and purple heart. Is is a Steve Good design. Beautiful, that would grace anyone's home. x Scruffydog 1 Quote Link to comment Share on other sites More sharing options...
Popular Post Goat Posted February 15, 2019 Popular Post Report Share Posted February 15, 2019 (edited) Here are my first projects of the year. The hippo was my first done with my old band saw. The bird was my first done with my new Delta scroll saw. Edited February 17, 2020 by Goat Travis, Rolf, spotsdad and 13 others 14 2 Quote Link to comment Share on other sites More sharing options...
Tomanydogs Posted February 15, 2019 Report Share Posted February 15, 2019 Those are both extremely good. Nice job Goat. Quote Link to comment Share on other sites More sharing options...
Rolf Posted February 15, 2019 Report Share Posted February 15, 2019 (edited) Goat both are excellent pieces. Your photo's show them very well. Edited February 15, 2019 by Rolf Quote Link to comment Share on other sites More sharing options...
Dennisfm56 Posted February 18, 2019 Report Share Posted February 18, 2019 This was my first that I completed. I have a tendency to have multiple projects going at once. Luckily I finished before my Wen developed some serious vibrations caused by a bad bearing. My new Delta should be arriving Wednesday. Travis, Scrappile, Jronn65 and 4 others 7 Quote Link to comment Share on other sites More sharing options...
Dennisfm56 Posted February 18, 2019 Report Share Posted February 18, 2019 On 1/11/2019 at 9:21 PM, Frank Pellow said: My first project for 2019 is a rather simple one. I am recovering from hip joint replacement surgery and, next week, I will "graduate" for my Physio Therapy sessions with Jane. I made her this plaque which I will present at the end of my last session: This was designed by Chachi and it is the second such plaque that I havemade. The foreground is 3mm thick cherry and the background is 7mm thick Jatoba. I've done both hip and knee replacements. Hope your recovery is going well. I'm sure your therapist will appreciate the thought and effort. Frank Pellow 1 Quote Link to comment Share on other sites More sharing options...
Nickel Falls Posted February 20, 2019 Report Share Posted February 20, 2019 This is my first project of the new year.....I did it because I had been reading about segmentation scrolling for a while. After doing a few smaller pieces to work out the bugs, i tackled this piece. I was very pleased with the result, and have gone on to do several other animals since then, including, wolves, lions, bears, horses, and a couple more. I intend to sell them at fairs and festivals this summer. Travis, Jronn65, scrollntole and 5 others 8 Quote Link to comment Share on other sites More sharing options...
woodduck Posted February 26, 2019 Report Share Posted February 26, 2019 This was a birthday gift for my sister' in laws husband who is a very keen supporter of the Manly sea eagles (Sydney rugby league side). It took me some time to do as I had to match the colours & also the letters were cut out first then glued on.The rest was segmentation. I also made the frame. Cheers Peter Jronn65, spotsdad, wombatie and 5 others 8 Quote Link to comment Share on other sites More sharing options...
Hawk Posted February 26, 2019 Report Share Posted February 26, 2019 (edited) Here's my first project of 2019. Took my quite some time to find a pattern I liked for this project. Found it hand painted on a drum in a museum, snapped a pic and I was off and running. This is the 3rd of 4. Now to locate the pattern for #4 The critters are walnut inlaid into a basswood blank. Chris Edited February 26, 2019 by Hawk Jronn65, Nickel Falls, Travis and 6 others 9 Quote Link to comment Share on other sites More sharing options...
Mort Tenon Posted February 26, 2019 Report Share Posted February 26, 2019 This is a Steve Good pattern. We were on vacation at an RV park and I downloaded this pattern and used their woodshop to make this good luck symbol. Scrappile, wombatie, spotsdad and 5 others 8 Quote Link to comment Share on other sites More sharing options...
VernLeonard Posted March 28, 2019 Report Share Posted March 28, 2019 I know that I am late to the party but this is my first cut on my new Pegas! Nickel Falls, RabidAlien and Travis 3 Quote Link to comment Share on other sites More sharing options...
Nickel Falls Posted April 1, 2019 Report Share Posted April 1, 2019 Nice....I like that pattern Quote Link to comment Share on other sites More sharing options...
Ksp Posted April 16, 2019 Report Share Posted April 16, 2019 On 1/3/2019 at 4:44 PM, Travis said: This month, it's an easy one. Post your first project of 2019! "Out with the old, in with the new,"as they say. We don't want to see what you made last year; we want to see what you made in 2019. Fresh off the saw. When you post, tell us a little about it. Who did you made it for and for what reason? Or maybe a little backstory. Projects are nice to see, but it's the story that goes with it that makes it special. Here's to a productive 2019! spotsdad, Nickel Falls, Karl S and 5 others 8 Quote Link to comment Share on other sites More sharing options...
Ksp Posted April 16, 2019 Report Share Posted April 16, 2019 Here's my first experience to make scroll saw bowl. Quote Link to comment Share on other sites More sharing options...
Ksp Posted April 16, 2019 Report Share Posted April 16, 2019 On 1/3/2019 at 4:44 PM, Travis said: This month, it's an easy one. Post your first project of 2019! "Out with the old, in with the new,"as they say. We don't want to see what you made last year; we want to see what you made in 2019. Fresh off the saw. When you post, tell us a little about it. Who did you made it for and for what reason? Or maybe a little backstory. Projects are nice to see, but it's the story that goes with it that makes it special. Here's to a productive 2019! I made it as a gift for my wife. Travis, RabidAlien, Karl S and 2 others 5 Quote Link to comment Share on other sites More sharing options...
Nickel Falls Posted April 17, 2019 Report Share Posted April 17, 2019 8 hours ago, Ksp said: Here's my first experience to make scroll saw bowl. Nice job.....it looks great. Quote Link to comment Share on other sites More sharing options...
scrollergirl Posted November 14, 2019 Report Share Posted November 14, 2019 On 1/28/2019 at 8:06 PM, Fred Kile said: This Alaska Railroad train is my first 2019 project. I did this at the request of a neighbor who will be sending it to a young boy in Alaska who loves trains. The train is 3D as it is raised at the front by about one inch off the tunnel behind it. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
scrollergirl Posted November 14, 2019 Report Share Posted November 14, 2019 I really like this locomotive scroll art. Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.