Popular Post Foxfold Posted January 24, 2019 Popular Post Report Share Posted January 24, 2019 (edited) Well, this is my first attempt at the pattern I bought. Not displeased with it although there are things that I'd do differently. My 'Napkins' must be a lot bigger than what is intended for this holder as they hide the 'bodice' of the dress. A photo of one with Napkins and a photo of the other side without, just to show. The gaps where the 'feet' go is my fault, I think I printed the base at 100% but I cut the doll at 95%, I'll watch for that later Edited January 24, 2019 by Foxfold bobscroll, ChelCass, Falcon and 7 others 10 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted January 24, 2019 Report Share Posted January 24, 2019 (edited) Nicely done. I've decided not to make any of these. I do not have any friends sophisticated enough to appreciate them! Well except for @heppnerguy, and he can make his own. Edited January 24, 2019 by Scrappile ChelCass, Foxfold, Jim McDonald and 2 others 5 Quote Link to comment Share on other sites More sharing options...
Gordster Posted January 24, 2019 Report Share Posted January 24, 2019 You did a good job on them..nice center piece Foxfold 1 Quote Link to comment Share on other sites More sharing options...
Foxfold Posted January 24, 2019 Author Report Share Posted January 24, 2019 25 minutes ago, Gordster said: You did a good job on them..nice center piece Thank you, I'm hosting a ' Posh' BBQ on 1st June and I thought I'd make a few for then. It would have to be better cut than this first one, but hopefully now that I know the 'ins and outs' of the pattern, I'll have some good ones by then. x RabidAlien and Gordster 2 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted January 24, 2019 Report Share Posted January 24, 2019 You did a beautiful job. I like it. In 1964 when my wife had our first child she, being Canadian, went to a department store to purchase napkins (diapers). She was sent up to housewares. There when they showed her napkins she said "No, those are called serviettes." She has since learned how to speak as an American! I also wondered whether one was purchasing plywood or patterns. I will have to order some patterns. Foxfold and bobscroll 1 1 Quote Link to comment Share on other sites More sharing options...
Foxfold Posted January 24, 2019 Author Report Share Posted January 24, 2019 9 minutes ago, Rockytime said: "No, those are called serviettes." I can understand that, we call them serviettes too Language is a funny thing, I remember going to my grandmothers and she gave me some money wrapped up in paper and said '' Go to the Chippy and give him this'' An hour later she came looking for me and asked ''What on earth are you doing child''? I said, ''I've looked everywhere and can't find a carpenter shop anywhere." She burst out laughing, to her a 'Chippy' was a fish and chip shop. !!! Gordster, bobscroll, wombatie and 1 other 2 2 Quote Link to comment Share on other sites More sharing options...
wombatie Posted January 25, 2019 Report Share Posted January 25, 2019 That is beautiful Brenda and I don't think it matters that your napkins are larger than intended because as you take one out the bodice will be revealed, like a strip tease. Marg bobscroll, Foxfold and heppnerguy 1 2 Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted January 25, 2019 Report Share Posted January 25, 2019 I think it is really well done and quite different. I have never seen this pattern before. And as far as Scrappile's comment goes. I just make some for my household here in Arizona as we are sophisticated to use one. Dick heppnerguy Tomanydogs, Foxfold and bobscroll 1 2 Quote Link to comment Share on other sites More sharing options...
Tomanydogs Posted January 25, 2019 Report Share Posted January 25, 2019 That looks really good Brenda. Foxfold 1 Quote Link to comment Share on other sites More sharing options...
daveww1 Posted January 25, 2019 Report Share Posted January 25, 2019 very nice job Foxfold 1 Quote Link to comment Share on other sites More sharing options...
Luperez548 Posted January 25, 2019 Report Share Posted January 25, 2019 Nice piece of art Foxfold 1 Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted January 26, 2019 Report Share Posted January 26, 2019 Good choice! Quote Link to comment Share on other sites More sharing options...
spirithorse Posted January 27, 2019 Report Share Posted January 27, 2019 Looks great, Brenda, Perhaps the napkin size looks too large because you reduced the pattern size to 95%. God Bless! Spirithorse Quote Link to comment Share on other sites More sharing options...
JTTHECLOCKMAN Posted January 30, 2019 Report Share Posted January 30, 2019 On 1/24/2019 at 11:26 AM, Foxfold said: Well, this is my first attempt at the pattern I bought. Not displeased with it although there are things that I'd do differently. My 'Napkins' must be a lot bigger than what is intended for this holder as they hide the 'bodice' of the dress. A photo of one with Napkins and a photo of the other side without, just to show. The gaps where the 'feet' go is my fault, I think I printed the base at 100% but I cut the doll at 95%, I'll watch for that later Have you figured out what size napkins work best for these?? Thanks Quote Link to comment Share on other sites More sharing options...
Foxfold Posted January 30, 2019 Author Report Share Posted January 30, 2019 5 hours ago, JTTHECLOCKMAN said: Have you figured out what size napkins work best for these?? Thanks Hi John, the napkins I have are 13" square (330mm) so the 'skirt' would be 6½" high, I'm cutting a new pattern as I think I cut the first one too short as I didn't cut it to scale. . I will adjust the pattern to fit and cut the 'hole' for the 'cog' last so that I can put it in a place that matches where the napkins should go for the best result. Don't know if this makes any sense.? Quote Link to comment Share on other sites More sharing options...
JTTHECLOCKMAN Posted January 30, 2019 Report Share Posted January 30, 2019 5 hours ago, Foxfold said: Hi John, the napkins I have are 13" square (330mm) so the 'skirt' would be 6½" high, I'm cutting a new pattern as I think I cut the first one too short as I didn't cut it to scale. . I will adjust the pattern to fit and cut the 'hole' for the 'cog' last so that I can put it in a place that matches where the napkins should go for the best result. Don't know if this makes any sense.? Yes I was looking at a site on ebay that sold many different colored ones but they are 10" square and was wondering if they would work. Quote Link to comment Share on other sites More sharing options...
Foxfold Posted January 30, 2019 Author Report Share Posted January 30, 2019 6 hours ago, JTTHECLOCKMAN said: Yes I was looking at a site on ebay that sold many different colored ones but they are 10" square and was wondering if they would work. I think any size would work perfectly well, you'd just have to adjust the size of your pattern and 'slot' to match the napkin, especially if you want the napkin to touch the 'floor'. I've just finished altering my own pattern to fit the napkins better. The paints still wet, but tomorrow I'll put up before and after photo's to clarify my meaning. xx RabidAlien 1 Quote Link to comment Share on other sites More sharing options...
rdatelle Posted February 4, 2019 Report Share Posted February 4, 2019 Very nice Brenda. I'm trying to work on that same pattern. I know if you make the pattern smaller it will work with cocktail napkins. I have one of a little girl I'm working on and the cocktail napkins seem to fit good. Just another option for different sizes. Quote Link to comment Share on other sites More sharing options...
Foxfold Posted February 4, 2019 Author Report Share Posted February 4, 2019 1 hour ago, rdatelle said: I know if you make the pattern smaller it will work with cocktail napkins Well you learn something new every day. I've never heard of 'cocktail napkins' I'll have to go look, thank you xx Quote Link to comment Share on other sites More sharing options...
rdatelle Posted February 4, 2019 Report Share Posted February 4, 2019 36 minutes ago, Foxfold said: Well you learn something new every day. I've never heard of 'cocktail napkins' I'll have to go look, thank you xx There small napkins that they use for drinks. There around 5 x 5 closed up and 10 x 10 if you open them up all the way. Foxfold 1 Quote Link to comment Share on other sites More sharing options...
Dave Monk Posted February 5, 2019 Report Share Posted February 5, 2019 Great job! Quote Link to comment Share on other sites More sharing options...
bobscroll Posted February 5, 2019 Report Share Posted February 5, 2019 Great job on your first napkin holder Brenda! They do look pretty! Thank you for posting, Bob Quote Link to comment Share on other sites More sharing options...
Foxfold Posted February 5, 2019 Author Report Share Posted February 5, 2019 On 1/30/2019 at 4:23 AM, JTTHECLOCKMAN said: Have you figured out what size napkins work best for these?? Thanks Yes, I've burnt the piece in this photo and will remake at 100% and I think then it will take my 'normal 13" square one, and I'm going to try and get some 'cocktail napkins' and make one to fit those too. Just for comparison. Quote Link to comment Share on other sites More sharing options...
JTTHECLOCKMAN Posted February 5, 2019 Report Share Posted February 5, 2019 3 hours ago, Foxfold said: Yes, I've burnt the piece in this photo and will remake at 100% and I think then it will take my 'normal 13" square one, and I'm going to try and get some 'cocktail napkins' and make one to fit those too. Just for comparison. I ordered a bunch 10 X 10 napkins and decided I will make all patterns fit that size. I like some of the pattern ideas coming through. Quote Link to comment Share on other sites More sharing options...
Foxfold Posted February 5, 2019 Author Report Share Posted February 5, 2019 2 hours ago, JTTHECLOCKMAN said: I like some of the pattern ideas coming through. Me too, there's some great ideas to work on. :-) Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.