Popular Post smitty0312 Posted January 30, 2019 Popular Post Report Posted January 30, 2019 (edited) I was asked if I could build this rustic bunny.....here it is.....1x4 boards.....I 1st made a template of bunny for tracing....then cut the 1x4 boards to appropriate lengths......traced bunny onto boards......then cut each board with the scroll saw......then attached them together on the back with scrap pieces of 1/2" plywood mainly.....then stained whole thing.....then painted the colors 1 coat only......then sanded to roughen up a little.....31"T......burlap bow/hot glue....I posted pics of the process to help I hope...I'm going to do one with pink also....comments always appreciated....thank you Edited January 30, 2019 by smitty0312 lawson56, amazingkevin, jollyred and 9 others 12 Quote
meflick Posted January 30, 2019 Report Posted January 30, 2019 Cute idea. Thanks for sharing. smitty0312 1 Quote
Fab4 Posted January 30, 2019 Report Posted January 30, 2019 Hi Dan The front of this looks really good - well done This would be a perfect project for pocket hole screws in the back, then you could get rid of the slats Fab4 smitty0312 1 Quote
lawson56 Posted January 30, 2019 Report Posted January 30, 2019 Down Right Awesome job!! smitty0312 1 Quote
Scrappile Posted January 31, 2019 Report Posted January 31, 2019 Very clever and well done! smitty0312 1 Quote
Tomanydogs Posted January 31, 2019 Report Posted January 31, 2019 Dan. Great idea. Nice bunny. smitty0312 1 Quote
Gordster Posted January 31, 2019 Report Posted January 31, 2019 Great idea Dan...Looks great..thanks for info on how you put it together... smitty0312 1 Quote
wombatie Posted February 1, 2019 Report Posted February 1, 2019 I do like the rustic look. Great work once again. Marg smitty0312 1 Quote
amazingkevin Posted February 6, 2019 Report Posted February 6, 2019 Smitty that's a biggy!!!! smitty0312 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.