Popular Post Hermit Posted February 5, 2019 Popular Post Report Share Posted February 5, 2019 This is an AlexFoxUa pattern from Etsy. My first paid pattern. Really enjoyed the quality of the pattern. Congrats Alex on your mention and pic in the spring edition of Scroll saw magazine. You deserve it. I enjoy the realistic patterns you offer everyone. The frame on mine is Mahogany. Finished with 1 coat of tung oil and 3 coats of deft rattle can lacquer. Splines were 1/4" scrap of Baltic birch. The cut was 1/4" Baltic Birch finished with 2 coats of clear shellac/denatured alcohol mix then 2 coats of deft rattle can lacquer. Backer board was 1/4" Baltic Birch. Started out flat....didn't like it then went satin black. Blades used were Flying Dutchman 2/0 Spiral 35 TPI for around the mouth and the rest was Olsen Skip Tooth 2/0 28 tooth per inch. This is a gift for my sister who rescues and preps cats for adoption. Phantom Scroller, Charlie E, Dave Monk and 15 others 17 1 Quote Link to comment Share on other sites More sharing options...
Dave Monk Posted February 5, 2019 Report Share Posted February 5, 2019 Beautiful pattern and cutting. Quote Link to comment Share on other sites More sharing options...
spirithorse Posted February 5, 2019 Report Share Posted February 5, 2019 Excellent work on a challenging project! Thanks for sharing and God Bless! Spirithorse Quote Link to comment Share on other sites More sharing options...
Scrappile Posted February 5, 2019 Report Share Posted February 5, 2019 Excellent on all facets, cutting, finishing and framing. The cat does look like he/she is ready to pounce. Quote Link to comment Share on other sites More sharing options...
Gordster Posted February 5, 2019 Report Share Posted February 5, 2019 Very well done Joe,beautiful frame too. Quote Link to comment Share on other sites More sharing options...
Scrolling Steve Posted February 5, 2019 Report Share Posted February 5, 2019 You did good !....Mighty fine work ! Quote Link to comment Share on other sites More sharing options...
daveww1 Posted February 5, 2019 Report Share Posted February 5, 2019 beautiful job Quote Link to comment Share on other sites More sharing options...
fordamir Posted February 5, 2019 Report Share Posted February 5, 2019 beautiful,beautiful,beautiful. I am not real fond of felines, but really like the expression . The frame corners are perfectly perfect. Great Job. Dave Quote Link to comment Share on other sites More sharing options...
rjR Posted February 5, 2019 Report Share Posted February 5, 2019 Great work. That cat looks ready to go birding! Quote Link to comment Share on other sites More sharing options...
wombatie Posted February 6, 2019 Report Share Posted February 6, 2019 That is very impressive, I love it. The cat reminds me so much of our old cat, she had great personality. Marg Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted February 6, 2019 Report Share Posted February 6, 2019 Very impressive piece. I can't think of a single thing that could be done any better then this is. You work is exceptional. So glad I was able to view it. Thanks for posting it Dick heppnerguy Quote Link to comment Share on other sites More sharing options...
alexfox Posted February 6, 2019 Report Share Posted February 6, 2019 Clean cut and great finishing work Hermit 1 Quote Link to comment Share on other sites More sharing options...
Charlie E Posted February 6, 2019 Report Share Posted February 6, 2019 Very nice job! So real my nose itches. It is fun cutting a quality pattern! amazingkevin 1 Quote Link to comment Share on other sites More sharing options...
Toothpick Posted February 7, 2019 Report Share Posted February 7, 2019 Incredible work! May I ask what scroll saw you used? Thanks for supply the other details. It really helps a new scroller like myself to know what tools the pros use. Quote Link to comment Share on other sites More sharing options...
Rockytime Posted February 7, 2019 Report Share Posted February 7, 2019 I love cats and that is a gorgeous pattern and excellent cutting! Quote Link to comment Share on other sites More sharing options...
Rockytime Posted February 7, 2019 Report Share Posted February 7, 2019 Love that pattern! I just now ordered it and downloaded it. Tomorrow I go to Office Depot and have it copied in red and start cutting. Quote Link to comment Share on other sites More sharing options...
rdatelle Posted February 7, 2019 Report Share Posted February 7, 2019 That came out great. My Granddaughter would love that but I don't think I could cut it out as good as you did. I'm not to good with spiral blades. Great pattern bu Ales to. Quote Link to comment Share on other sites More sharing options...
alexfox Posted February 7, 2019 Report Share Posted February 7, 2019 (edited) 2 hours ago, rdatelle said: I'm not to good with spiral blades. Great pattern bu Ales to. I use only flat blades, they are also good at cutting fretwork patterns, here is result of my cutting by flat blades - one more cat Edited February 7, 2019 by alexfox Tomanydogs, spotsdad, Hermit and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Old Joe Posted February 7, 2019 Report Share Posted February 7, 2019 Great job, Hermit! I really like that pattern. I find completed patterns of Alex's to be as rewarding as anything I do from somebody else's design. I only wish I had the talent and knowledge to design my own.I also cut the one Alex showed above, and like Alex, I used all flat scroll reverse blades. Quote Link to comment Share on other sites More sharing options...
Smitty Posted February 7, 2019 Report Share Posted February 7, 2019 I keep coming back to look at this. I'm not a cat person, but wow, this is really really good. I think this would take me forever to complete. I am amazed. Quote Link to comment Share on other sites More sharing options...
Tomanydogs Posted February 8, 2019 Report Share Posted February 8, 2019 Nice kitty cat. You did a very good job on this. Quote Link to comment Share on other sites More sharing options...
lawson56 Posted February 8, 2019 Report Share Posted February 8, 2019 That is a Down Right Awesome job!!! Quote Link to comment Share on other sites More sharing options...
Hermit Posted February 8, 2019 Author Report Share Posted February 8, 2019 Thanks everyone, I appreciate the kind words. Quote Link to comment Share on other sites More sharing options...
Hermit Posted February 8, 2019 Author Report Share Posted February 8, 2019 On 2/6/2019 at 6:46 PM, Rockytime said: Love that pattern! I just now ordered it and downloaded it. Tomorrow I go to Office Depot and have it copied in red and start cutting. I didn't know you could do that. My little copy place said they couldn't copy in red unless it was done in red originally. Will have to try Office Depot next time. Red would of been much easier on the eyes on this cut. Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted February 14, 2019 Report Share Posted February 14, 2019 On 2/6/2019 at 9:03 PM, Toothpick said: Incredible work! May I ask what scroll saw you used? Thanks for supply the other details. It really helps a new scroller like myself to know what tools the pros use. Lol,any will work,lol Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.