Popular Post Denny Knappen Posted February 5, 2019 Popular Post Report Share Posted February 5, 2019 I purchased the Bowl C-30 pattern from the Etsy site of Alex Fox. I enlarged the pattern by 25%. The wood is solid 1/4" Cherry 10 inch square. I used #68 drill bit and #1 FD UR blades. I finished with a spray coat of Shellac. The most time consuming was the glue up. glue a ring, let dry for 30 minutes, and glue another ring. While waiting for the glue to dry, I cut three Miniature Birdhouse Ornaments. Comments welcome. Scrolling Steve, spotsdad, frankorona and 16 others 19 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted February 5, 2019 Report Share Posted February 5, 2019 Looks great, Denny. Nice to see you posts again. Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted February 5, 2019 Author Report Share Posted February 5, 2019 Thanks Paul. When sanding the bottom ring on the mac mop, the ring blew apart in three pieces. I was able to glue them in place on the ring above. amazingkevin and meflick 1 1 Quote Link to comment Share on other sites More sharing options...
rjR Posted February 5, 2019 Report Share Posted February 5, 2019 Nice basket. Will be very pretty as a table centerpiece. Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted February 5, 2019 Author Report Share Posted February 5, 2019 32 minutes ago, rjR said: Nice basket. Will be very pretty as a table centerpiece. Thanks RJ. Not sure what it could be used for. Quote Link to comment Share on other sites More sharing options...
Scrappile Posted February 5, 2019 Report Share Posted February 5, 2019 20 minutes ago, Denny Knappen said: Thanks RJ. Not sure what it could be used for. CANDY!!! Ptofimpact 1 Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted February 5, 2019 Author Report Share Posted February 5, 2019 9 minutes ago, Scrappile said: CANDY!!! Good idea, Paul. Got some! Quote Link to comment Share on other sites More sharing options...
meflick Posted February 5, 2019 Report Share Posted February 5, 2019 Nice work on this one Denny. Glad to see you coming back to the Village to show off some of your work. Paul had a great idea, candy dish. Easter is coming, so get some nice easter chocolates. Quote Link to comment Share on other sites More sharing options...
Gordster Posted February 5, 2019 Report Share Posted February 5, 2019 (edited) Beautiful work Denny..perfect wood selection...must have been hard waiting on the glue to set. It's so nice,I can't say what to put in it.it's an eye catcher for sure. Edited February 5, 2019 by Gordster Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted February 5, 2019 Author Report Share Posted February 5, 2019 8 minutes ago, meflick said: Nice work on this one Denny. Glad to see you coming back to the Village to show off some of your work. Paul had a great idea, candy dish. Easter is coming, so get some nice easter chocolates. Thanks Melanie. How about Tootsie Rolls. meflick 1 Quote Link to comment Share on other sites More sharing options...
meflick Posted February 5, 2019 Report Share Posted February 5, 2019 Ummm, Tootsie Rolls would work and look very nice in there. Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted February 5, 2019 Author Report Share Posted February 5, 2019 1 minute ago, Gordster said: Beautiful work Denny..perfect wood selection...must have been hard waiting on the glue to set. It's so nice,I can't say what to put in it.it's an eye catcher for sure. Thanks Gordie. Cutting did not take long, just watching glue dry! amazingkevin 1 Quote Link to comment Share on other sites More sharing options...
trackman Posted February 5, 2019 Report Share Posted February 5, 2019 Denny would CA glue with activator work? Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted February 6, 2019 Author Report Share Posted February 6, 2019 14 minutes ago, trackman said: Denny would CA glue with activator work? Not for gluing the rings. The rings need to be advanced 5 degrees, so I move them until exactly the right position. amazingkevin 1 Quote Link to comment Share on other sites More sharing options...
Old Joe Posted February 6, 2019 Report Share Posted February 6, 2019 (edited) 13 hours ago, Denny Knappen said: Thanks RJ. Not sure what it could be used for. Nice work, Denny! I made quite a few baskets for Christmas presents. I filled them with scrolled ornaments, but I also was not sure what they were good for. My wife took two and filled then with potpourri. My beach loving next door neighbor filled hers with seashells. Just a couple of ideas. Here’s two with potpourri, one of Alex Fox’s and one of Steve Good’s. Edited February 6, 2019 by Old Joe Scrolling Steve, GPscroller, amazingkevin and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted February 6, 2019 Author Report Share Posted February 6, 2019 13 minutes ago, Old Joe said: Nice work, Denny! I made quite a few baskets for Christmas presents. I filled them with scrolled ornaments, but I also was not sure what they were good for. My wife took two and filled then with potpourri. My beach loving next door neighbor filled hers with seashells. Just a couple of ideas. Here’s two with potpourri, one of Alex Fox’s and one of Steve Good’s. Very nice scrolling and great ideas. Quote Link to comment Share on other sites More sharing options...
Old Joe Posted February 6, 2019 Report Share Posted February 6, 2019 24 minutes ago, Denny Knappen said: Very nice scrolling and great ideas. Though beautiful, I have found Alex’s baskets to be a bit fragile to make out of solid wood. Or at least I haven’t found the perfect wood yet. Even high quality BB plywood is a bit fragile. By the way, Steve Good lasered the Lords Prayer around the top on one those baskets of his! Quote Link to comment Share on other sites More sharing options...
wombatie Posted February 6, 2019 Report Share Posted February 6, 2019 That looks terrific Denny. I agree will Paul put candy in it..... Marg Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted February 6, 2019 Report Share Posted February 6, 2019 I have cut a couple of Alex Fox's basket and have a couple more yet to do. I like the basket a lot. Yours is really nice and they do make great gifts. Thanks for sharing your post. I always enjoy seeing your work Dick heppnerguy Quote Link to comment Share on other sites More sharing options...
daveww1 Posted February 6, 2019 Report Share Posted February 6, 2019 terrific job Quote Link to comment Share on other sites More sharing options...
Scrolling Steve Posted February 6, 2019 Report Share Posted February 6, 2019 That turned out great !...Love the Cherry ! Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted February 6, 2019 Author Report Share Posted February 6, 2019 14 hours ago, Old Joe said: Though beautiful, I have found Alex’s baskets to be a bit fragile to make out of solid wood. Or at least I haven’t found the perfect wood yet. Even high quality BB plywood is a bit fragile. By the way, Steve Good lasered the Lords Prayer around the top on one those baskets of his! That is why I increased the pattern by 25%, but it was still fragile. I will be more careful in sanding. Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted February 6, 2019 Author Report Share Posted February 6, 2019 10 hours ago, wombatie said: That looks terrific Denny. I agree will Paul put candy in it..... Marg Thanks Marge. I appreciate your comment. Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted February 6, 2019 Author Report Share Posted February 6, 2019 10 hours ago, heppnerguy said: I have cut a couple of Alex Fox's basket and have a couple more yet to do. I like the basket a lot. Yours is really nice and they do make great gifts. Thanks for sharing your post. I always enjoy seeing your work Dick heppnerguy Thanks Dick. These will probably be gifts. Quote Link to comment Share on other sites More sharing options...
rjweb Posted February 6, 2019 Report Share Posted February 6, 2019 another beautiful project Denny, RJ Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.