Popular Post Hawk Posted March 12, 2019 Popular Post Report Share Posted March 12, 2019 I found myself in need of a clock in my "home office", so after some searching I found just the pattern at the Wooden Teddy Bear. It's a Sue Met pattern "Golf Wall Clock". Armed with that I now needed to figure out what wood to use. A few months back we had an oversized chair that had some serious wear and tearing. Instead of dragging it to the curb I decided to take it to the garage and take it apart. The material came off quite easily exposing some promising wood. Took about a week to get it completely taken apart, I separated the wood into 2 piles. 1 for the burn pile and the other for possible projects. About 20% of the wood had potential. Gathered up enough to get 7 pieces an inch and a half wide and about 11 inches long. Ran them thru the joiner to square the edges then glue them together then thru the thickness planner. Ended up with a rather nice looking blank. So in the future I'll be taking furniture apart before tossing it to the curb. I ended up with a nice clock for my "Golf" theme office area... I did make a couple of modifications to personalized the clock for me. Chris Charlie E, meflick, jollyred and 7 others 10 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted March 12, 2019 Report Share Posted March 12, 2019 Very nice job. Not a golfer myself but can see that would be well received by golfers. You ought to make one and sell it to a local golf club. Bet you would get requests to sell more. Quote Link to comment Share on other sites More sharing options...
Scrolling Steve Posted March 12, 2019 Report Share Posted March 12, 2019 That was a great use of an old chair !....Nice. Quote Link to comment Share on other sites More sharing options...
Rob Posted March 12, 2019 Report Share Posted March 12, 2019 Great job! Rob Quote Link to comment Share on other sites More sharing options...
scrollerpete Posted March 12, 2019 Report Share Posted March 12, 2019 Pretty nice, I think I will get the pattern, my golf club might be interested Quote Link to comment Share on other sites More sharing options...
Rockytime Posted March 13, 2019 Report Share Posted March 13, 2019 Looks terrific! Quote Link to comment Share on other sites More sharing options...
JTTHECLOCKMAN Posted March 13, 2019 Report Share Posted March 13, 2019 Like it alot.Nice work and thanks for showing. Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted March 13, 2019 Report Share Posted March 13, 2019 I am not a golfer, but I know a few. I buy a lot of my Patterns directly from Sue Mey's sight. If you register and log in before you purchase from her, she will save your purchase orders and you can always go back and redownload any patterns you may have lost at no extra cost. Besides that, you have your pattern on your computer in minutes at no extra cost too. Can't beat that. I like you golfer clock and I just may go and purchase it from her also. Thanks for sharing your wood story and your great little clock you made. I enjoyed both Dick heppnerguy amazingkevin 1 Quote Link to comment Share on other sites More sharing options...
wombatie Posted March 13, 2019 Report Share Posted March 13, 2019 A fabulous looking clock. Sue Mey has got some terrific patterns, visit her site you will want to spend a lot of money. Marg heppnerguy 1 Quote Link to comment Share on other sites More sharing options...
Foxfold Posted March 13, 2019 Report Share Posted March 13, 2019 Nice one, I like it x heppnerguy 1 Quote Link to comment Share on other sites More sharing options...
lawson56 Posted March 13, 2019 Report Share Posted March 13, 2019 Love it.Though I don't Golf,It is a Beauty. Excellent job. heppnerguy 1 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted March 13, 2019 Report Share Posted March 13, 2019 Not a golfer either.. You did a great job cutting.. and also recycling that old chair.. win win.. I also cut this pattern and have the products on my site.. make mine from 1/8 BBply and a walnut ply backer.. Sell a lot of these.. more than I expected.. Quote Link to comment Share on other sites More sharing options...
daveww1 Posted March 13, 2019 Report Share Posted March 13, 2019 very nice job Quote Link to comment Share on other sites More sharing options...
Charlie E Posted March 13, 2019 Report Share Posted March 13, 2019 Great looking clock. You should have set the time to FOUR! heppnerguy and amazingkevin 1 1 Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted March 13, 2019 Report Share Posted March 13, 2019 Very well done. I make a golf project for a local charity every year. This would be a great pattern. amazingkevin and heppnerguy 2 Quote Link to comment Share on other sites More sharing options...
penquin Posted March 13, 2019 Report Share Posted March 13, 2019 Looks great, love the clock, got someone who would enjoy that. jim Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted March 14, 2019 Report Share Posted March 14, 2019 You cut it well!!! heppnerguy 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.