Dave Monk Posted March 16, 2019 Report Share Posted March 16, 2019 Received my new saw today from D&D. Didn't even have to make any adjustments to it. Run great straight out of the box. I am totally impressed with it. Time will tell. OCtoolguy, orangeman, Falcon and 6 others 8 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted March 16, 2019 Report Share Posted March 16, 2019 The way it should be!! Congratulations and hope it stays that way! Dave Monk, OCtoolguy and krsbrm87 2 1 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted March 16, 2019 Report Share Posted March 16, 2019 (edited) Always a good day when the new tools arrive.. Glad you like it so far.. Hopefully it'll be a great and enjoyable saw to use for you.. That style saw in my opinion is the only one to have for someone that does angle / bevel cuts.. they are awesome to work with doing those cuts with the table staying flat.. Hopefully Iggy (Scott) will have the same experience with his saw when it arrives.. Edited March 16, 2019 by kmmcrafts OCtoolguy, krsbrm87 and Dave Monk 3 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted March 16, 2019 Report Share Posted March 16, 2019 Congrats Dave. Keep us informed as to how it works out. Should be great knowing Pegas as we do. Â Dave Monk and krsbrm87 2 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted March 16, 2019 Report Share Posted March 16, 2019 I'm hopeful that Pegas will set the standard and produce a premium quality saw that comes set up to run right out of the box.. If they have all their saws ready to cut right out of the box.. I think they could put a hurt on the " other like saws".. krsbrm87, OCtoolguy and Dave Monk 3 Quote Link to comment Share on other sites More sharing options...
Sycamore67 Posted March 16, 2019 Report Share Posted March 16, 2019 Great but No Pictures? Dave Monk 1 Quote Link to comment Share on other sites More sharing options...
Iguanadon Posted March 16, 2019 Report Share Posted March 16, 2019 Great news Dave. Mine arrives Tuesday. We'll see how long it takes me to wear one out. OCtoolguy and Dave Monk 1 1 Quote Link to comment Share on other sites More sharing options...
Bill WIlson Posted March 16, 2019 Report Share Posted March 16, 2019 Congrats! Looking forward to hearing your impressions after you put a few miles on it. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Old Joe Posted March 16, 2019 Report Share Posted March 16, 2019 I have a green eye of jealousy. Iâm going to have to start selling some of the stuff Iâve got piling up. Dave Monk and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
rjweb Posted March 16, 2019 Report Share Posted March 16, 2019 Congratulations on your new toy, like they say we need pictures, enjoy it, RJÂ Dave Monk and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted March 16, 2019 Report Share Posted March 16, 2019 Congrats on the new saw. As others said, keep us informed. OCtoolguy and Dave Monk 2 Quote Link to comment Share on other sites More sharing options...
stevan Posted March 16, 2019 Report Share Posted March 16, 2019 According to UPS, my is still sitting at Bear Wood. OCtoolguy and Dave Monk 1 1 Quote Link to comment Share on other sites More sharing options...
JTTHECLOCKMAN Posted March 16, 2019 Report Share Posted March 16, 2019 Just curious how long did it take to get the saw after ordering?? Dave Monk and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
lawson56 Posted March 16, 2019 Report Share Posted March 16, 2019 A Great Big Congrats,I know how happy I was when I got my new saw.Still am.Keep us up to date on how it runs. Dave Monk and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
Dave Monk Posted March 16, 2019 Author Report Share Posted March 16, 2019 41 minutes ago, JTTHECLOCKMAN said: Just curious how long did it take to get the saw after ordering?? I told Dave at D&D in January that I wanted one. He called me the first of the week and said it was available. I paid for it and he had it dropped shipped the next day. Got it in three days. I love it. OCtoolguy and orangeman 2 Quote Link to comment Share on other sites More sharing options...
Dave Monk Posted March 16, 2019 Author Report Share Posted March 16, 2019 1 hour ago, stevan said: According to UPS, my is still sitting at Bear Wood. What in the world is their hold up? OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted March 16, 2019 Report Share Posted March 16, 2019 26 minutes ago, Dave Monk said: What in the world is their hold up? I've never been super impressed with Bear Wood.. Yeah Bushton is on my list too, LOL Anyway, I ordered blades last year.... I also ordered blades from DND on the same day.. infact I also ordered blades from Mikes too.. same day.. It took Bear Woods 3 weeks to even mail out my order.. I had already had my order from DND and Mikes.. both orders came in the mail the same day 3 day later.. was 3.5 weeks for BW's .. I realize they are in Canada and I knew it'd take a little time to go through customs etc... but... three weeks just to get it packaged and on its way.. This wouldn't stop me from ordering again from them.. I just know that it takes them a long time to get orders out.. Much like Bushton.. I understand with Bushton because they're having issues... Never did hear why it took BW's so long to get my order in the mail.. I''ll order my stuff from DND or QTE before I would order from BW.. That's just my opinion... if you all have good experiences with BW.. by all means buy from them.. Not bad mouthing them.. just telling my experience.. Every business at some point and time has a issue from time to time.. How they handle it is how I decide to handle it next time.. LOL   OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted March 16, 2019 Report Share Posted March 16, 2019 33 minutes ago, kmmcrafts said: I've never been super impressed with Bear Wood.. Yeah Bushton is on my list too, LOL Anyway, I ordered blades last year.... I also ordered blades from DND on the same day.. infact I also ordered blades from Mikes too.. same day.. It took Bear Woods 3 weeks to even mail out my order.. I had already had my order from DND and Mikes.. both orders came in the mail the same day 3 day later.. was 3.5 weeks for BW's .. I realize they are in Canada and I knew it'd take a little time to go through customs etc... but... three weeks just to get it packaged and on its way.. This wouldn't stop me from ordering again from them.. I just know that it takes them a long time to get orders out.. Much like Bushton.. I understand with Bushton because they're having issues... Never did hear why it took BW's so long to get my order in the mail.. I''ll order my stuff from DND or QTE before I would order from BW.. That's just my opinion... if you all have good experiences with BW.. by all means buy from them.. Not bad mouthing them.. just telling my experience.. Every business at some point and time has a issue from time to time.. How they handle it is how I decide to handle it next time.. LOL   I have only ordered from BW once. It took a couple of weeks to get part of my order because of backorder situation. The did finally ship the remainder but all in all, I think it was pretty close to a month to get it completed. I'll not be ordering from them again unless they have something that nobody else has. JMHO. kmmcrafts 1 Quote Link to comment Share on other sites More sharing options...
Iguanadon Posted March 16, 2019 Report Share Posted March 16, 2019 5 hours ago, stevan said: According to UPS, my is still sitting at Bear Wood. Mine says the same thing, but I received an email from UPS with my delivery date of Tuesday, so we'll see if it's coming "next day air" OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
teachnlearn Posted March 17, 2019 Report Share Posted March 17, 2019 Got a 30 year old craftsman that still run, jealous. Runs straight out of the box? Is it battery powered or does the box supply power? RJF Dave Monk and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
rjweb Posted March 17, 2019 Report Share Posted March 17, 2019 Iggy, where did you order your new saw at, RJÂ OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Iguanadon Posted March 17, 2019 Report Share Posted March 17, 2019 29 minutes ago, rjweb said: Iggy, where did you order your new saw at, RJ Ordered mine from Bear Woods. They were taking pre-orders in January and I signed up for one from the first shipment they were going to receive. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Dave Monk Posted March 18, 2019 Author Report Share Posted March 18, 2019 3 hours ago, Iguanadon said: Ordered mine from Bear Woods. They were taking pre-orders in January and I signed up for one from the first shipment they were going to receive. Gave it a workout today. Sure hope you like yours as much as I like mine. The only thing that is going to seem weird to you is the tensioning. Iguanadon and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted March 18, 2019 Report Share Posted March 18, 2019 Dave you shouldn't have to worry about the tension. It the upper arm is parallel to the table, them the only tension is the lever on the top clamp,,, I know on my Hegner, I adjust the tension often with the back knob,,, not so with the Pegas, type saw... Mine is a Seyco, I know I am going to wish it was a Pegas......... OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted March 18, 2019 Report Share Posted March 18, 2019 Once that upper arm is parallel make note of the position of the knob at the back.. many of the Excalibur type saws this will turn on it's own over time.. Most annoying thing about my EX now.... is it untunes itself.. and pretty fast rate for me.. I posted about this and many others said theirs does the same thing.. I'm planning to add a little loctite on the threads then set it where it should be and hopefully it'll take care of that annoyance for me.. Otherwise.. I love the saw now that I've finally got it running good..Hopefully Pegas took note of this issue and redesigned it to stay put better.. Glad to hear you like the saw.. OCtoolguy and Dave Monk 2 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.