JTTHECLOCKMAN Posted April 1, 2019 Report Share Posted April 1, 2019 How many here use the hold down foot supplied with the saw when new?? How many have taken it off all together??? How many still have it on but do not use it and use it to hold up an air hose or something else??? OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Foxfold Posted April 1, 2019 Report Share Posted April 1, 2019 I'm not an experience scroller by most standards, but I took mine off as I found it got in my way, although I'm sure it would come in handy in some circumstances. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
New Guy Posted April 1, 2019 Report Share Posted April 1, 2019 Removed it right away. WayneMahler and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
trackman Posted April 1, 2019 Report Share Posted April 1, 2019 Have no idea were it went. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Chunkthekid Posted April 1, 2019 Report Share Posted April 1, 2019 Came off right away. I don't think it made it to the new house. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted April 1, 2019 Report Share Posted April 1, 2019 First thing off my saw. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Bill WIlson Posted April 1, 2019 Report Share Posted April 1, 2019 When I first started scrolling, I used the hold down on my Craftsman saw. That thing vibrated enough to make the hold down almost a necessity. Besides, I really didn't know any better. As I got better at cutting, I realized it was more hindrance than help, so I took it off. Never used the one on my 2nd saw, DeWalt or my current saw, EX-21. WayneMahler, oldhudson and OCtoolguy 3 Quote Link to comment Share on other sites More sharing options...
scrollerpete Posted April 1, 2019 Report Share Posted April 1, 2019 That was the first thing that I removed from the saw, and don’t ask me where it is now? OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted April 1, 2019 Report Share Posted April 1, 2019 At present, I have 3 saws and none of them have the hold down on them. My first saw didn't have it. The previous owner must have ditched it. Quote Link to comment Share on other sites More sharing options...
Rockytime Posted April 1, 2019 Report Share Posted April 1, 2019 I still have the hold downs from the three Hawks I had. They are in a tool cabinet somewhere. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted April 1, 2019 Report Share Posted April 1, 2019 BTW, the shafts on the hold downs are excellent 1/4" machinable material. Lots of space is taken up with my steel and brass stash. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Karl S Posted April 1, 2019 Report Share Posted April 1, 2019 In a drawer, I never throw ANYTHING away! meflick and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
JimErn Posted April 1, 2019 Report Share Posted April 1, 2019 ROFLMAO, I had to stop and think what you were talking about, gone like a greyhound The one on the bottom of the Ex is gone too OCtoolguy and John B 2 Quote Link to comment Share on other sites More sharing options...
new2woodwrk Posted April 1, 2019 Report Share Posted April 1, 2019 I never hooked mine up - didn't like it at all OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Gonzo Posted April 2, 2019 Report Share Posted April 2, 2019 I took mine off right away OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted April 2, 2019 Report Share Posted April 2, 2019 (edited) My new Hawk is the only saw that still has it on.. that's because you have to take the accessory arm off to get it out.. as I tried to take it off... but I haven't had time to fuss with it too much.. but it is raised up and out of the way as best as I could get it.. I've never used one.. so I have no idea how it helps.. LOL.. I have all of them for each saw.. just not on the saws... Edited April 2, 2019 by kmmcrafts OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
bazzz Posted April 2, 2019 Report Share Posted April 2, 2019 Removed it and stashed it away. I found it when I was cleaning up and had to think about what it was. My old Craftsman saw has a poor guard design anyway. It is only the weight of the plastic holding down the piece being cut, not a spring or a clamp. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
jollyred Posted April 2, 2019 Report Share Posted April 2, 2019 Mine are in a box somewhere. I actually like having the board slap up and down ocassionally to keep me awake. Karl S and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
JTTHECLOCKMAN Posted April 2, 2019 Author Report Share Posted April 2, 2019 Maybe we could send them to a specific place and they can reuse them for new saws. They all are from reading here brand new. They keep recycling them they could skip making that piece. meflick and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted April 2, 2019 Report Share Posted April 2, 2019 6 minutes ago, JTTHECLOCKMAN said: Maybe we could send them to a specific place and they can reuse them for new saws. They all are from reading here brand new. They keep recycling them they could skip making that piece. I'm guessing but, I bet they are required to have it on there when sold new.. Probably some idiot scratched their finger or the wood started bouncing and pinched their finger.. and thus.. a safety device was invented and required to be on any new machine.. Now.. to me it's more of a safety hazard on there than off.. but that's just me... gotta remember.. they have some real dumb people in this world.. since they now have to mark coffee cups with Caution Hot now days.. warning labels and caution signs all over the place these days.. Surprised they don't have a warning to not change the tire on a car while it's in motion, LOL barb.j.enders and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted April 2, 2019 Report Share Posted April 2, 2019 Take the warning labels off of everything. Let the gene pool sort itself out. John B, Dave Monk, meflick and 2 others 1 4 Quote Link to comment Share on other sites More sharing options...
JTTHECLOCKMAN Posted April 2, 2019 Author Report Share Posted April 2, 2019 Now Kevin you used terms in here that are not allowed any more in today's society . You can be called out by the politically correct police. We must not harm in any way anyone's feelings. People are very sensitive these days. A whole new world. But you are probably right. Many examples of this all around us. I'm guessing but, I bet they are required to have it on there when sold new.. Probably some idiot scratched their finger or the wood started bouncing and pinched their finger.. and thus.. a safety device was invented and required to be on any new machine.. Now.. to me it's more of a safety hazard on there than off.. but that's just me... gotta remember.. they have some real dumb people in this world.. since they now have to mark coffee cups with Caution Hot now days.. warning labels and caution signs all over the place these days.. Surprised they don't have a warning to not change the tire on a car while it's in motion, LOL John B, OCtoolguy and kmmcrafts 1 2 Quote Link to comment Share on other sites More sharing options...
John B Posted April 2, 2019 Report Share Posted April 2, 2019 I think I probably have about 3 or 4 under my bench somewhere. About as useless as a hip pocket in a singlet WayneMahler and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
Don F Posted April 2, 2019 Report Share Posted April 2, 2019 Still up side down in it,s holder never use it. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
wombatie Posted April 2, 2019 Report Share Posted April 2, 2019 My DeWalt - off and in a drawer somewhere. My EX21 - still on but on the side to the top, used to hold onto when I bring the arm down. Mainly there in case my granddaughter wants to have a go. Marg John B, Dave Monk and OCtoolguy 3 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.