Sycamore67 Posted April 3, 2019 Report Posted April 3, 2019 I recently purchased one of the cheap Lasers on Ebay and paid about $80 for it. It will Laser a JPG image about 2" x 2". I wanted to try it out on a project so made a box to hold the puzzles of the Dragon called Hie designed by Judy Peterson. The box is made of 5/16" oak with the corners mitered using a hand plane and shooting board. The top and bottom are 1/8' BB and I lasered a copy of the puzzle on the top and a small Handcrafted by on the bottom. I made two puzzles with one being quarter sawn Sycamore and the other Aspen dyed red. The puzzle pieces are fully interchangeable. Scrolling Steve, MTCowpoke22, meflick and 5 others 8 Quote
hotshot Posted April 3, 2019 Report Posted April 3, 2019 $80?, it did a pretty good job. Probably cheaper than those custom branding irons. Quote
new2woodwrk Posted April 3, 2019 Report Posted April 3, 2019 Wow, good job! Would you mind posting a pic of the laser ? Don't think I've seen these Quote
Sycamore67 Posted April 3, 2019 Author Report Posted April 3, 2019 This is the Laser I bought on eBay. amazingkevin and new2woodwrk 2 Quote
amazingkevin Posted April 3, 2019 Report Posted April 3, 2019 What a machine for only $80.00,You robbed them,lol Quote
meflick Posted April 3, 2019 Report Posted April 3, 2019 3 hours ago, hotshot said: $80?, it did a pretty good job. Probably cheaper than those custom branding irons. It is. They are well over $100 usually. Nice work Larry. That's a beautiful box. thanks for sharing. Quote
oldhudson Posted April 3, 2019 Report Posted April 3, 2019 3 hours ago, Sycamore67 said: I recently purchased one of the cheap Lasers on Ebay and paid about $80 for it. It will Laser a JPG image about 2" x 2". I wanted to try it out on a project so made a box to hold the puzzles of the Dragon called Hie designed by Judy Peterson. The box is made of 5/16" oak with the corners mitered using a hand plane and shooting board. The top and bottom are 1/8' BB and I lasered a copy of the puzzle on the top and a small Handcrafted by on the bottom. I made two puzzles with one being quarter sawn Sycamore and the other Aspen dyed red. The puzzle pieces are fully interchangeable. Great job on those corners. I love the addition of the splines. Quote
Sycamore67 Posted April 3, 2019 Author Report Posted April 3, 2019 There are several just like mine for $84 on eBay right now. Quote
spirithorse Posted April 3, 2019 Report Posted April 3, 2019 Nicely done! I wonder if you could position sections at 2" x 2" or so and extend the design to the size you wanted? Also, nice cutting to make the puzzle pieces interchangeable! God Bless! Spirithorse Quote
heppnerguy Posted April 4, 2019 Report Posted April 4, 2019 nice box. And you sure got some reactions on you little laser machine too. I have eyeballed them but was skeptical because of the low price Dick heppnerguy Quote
.thumb.jpg.a8cb2db9c98f402a34caa562781588dc.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.