DELTA 40-694

[idgaf831]

finally got my new saw set it up put the table on put a blade in and the blade is not centered it's touching the left side. anyone know what to do to fix this  please let me know .

[JTTHECLOCKMAN]

Is the table level?? Do not just go by markings on the gauge. Next is the blade sitting in the clamps correctly and straight. Are the set screws in the clamps set properly if you know what to look for. ??? 

[lawson56]

I agree with JT,Find you a level,look for the set screws.I have had to do this to several of my saws over the yrs,

[kmmcrafts]

I think if it's that far off you're going to need to loosen the bolts that hold the table down and sort of alien it and tighten them back down.. There is not really any adjustment for the table but there is enough slop around those bolt holes that it'll throw that off enough like this.. Had to do this on my DeWalt years ago when I first got it.. or maybe it was the Dremel anyway one of my saws came that way.. I thought I was going to have to send it back but then someone suggested this.. which fixed it.. 

[idgaf831]

Thanks for the reply I'm going to try that I will let you know if it works 

 

[idgaf831]

I'm a happy scroller once again thanks again for the help now my wife be telling me to find something to do.

[Scrappile]

Glad you got it fixed.  Let's see some projects!

[rjweb]

Idgaf831,

Glad you got it worked out, where in philly are you at, I moved from Philadelphia 3 years ago was in the far northeast, RJ