idgaf831 Posted May 16, 2019 Report Share Posted May 16, 2019 finally got my new saw set it up put the table on put a blade in and the blade is not centered it's touching the left side. anyone know what to do to fix this please let me know . Quote Link to comment Share on other sites More sharing options...
JTTHECLOCKMAN Posted May 16, 2019 Report Share Posted May 16, 2019 Is the table level?? Do not just go by markings on the gauge. Next is the blade sitting in the clamps correctly and straight. Are the set screws in the clamps set properly if you know what to look for. ??? OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
lawson56 Posted May 16, 2019 Report Share Posted May 16, 2019 I agree with JT,Find you a level,look for the set screws.I have had to do this to several of my saws over the yrs, OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted May 16, 2019 Report Share Posted May 16, 2019 I think if it's that far off you're going to need to loosen the bolts that hold the table down and sort of alien it and tighten them back down.. There is not really any adjustment for the table but there is enough slop around those bolt holes that it'll throw that off enough like this.. Had to do this on my DeWalt years ago when I first got it.. or maybe it was the Dremel anyway one of my saws came that way.. I thought I was going to have to send it back but then someone suggested this.. which fixed it.. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
idgaf831 Posted May 16, 2019 Author Report Share Posted May 16, 2019 Thanks for the reply I'm going to try that I will let you know if it works OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
idgaf831 Posted May 16, 2019 Author Report Share Posted May 16, 2019 I'm a happy scroller once again thanks again for the help now my wife be telling me to find something to do. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted May 16, 2019 Report Share Posted May 16, 2019 Glad you got it fixed. Let's see some projects! OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
rjweb Posted May 16, 2019 Report Share Posted May 16, 2019 Idgaf831, Glad you got it worked out, where in philly are you at, I moved from Philadelphia 3 years ago was in the far northeast, RJ OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.