rjR Posted July 1, 2019 Report Share Posted July 1, 2019 (edited) A friend had shown some of these on fakebook. I decided- well a piece of pallet wood lying in my shop; decided that it wanted to be one. So I did a few image searches and then drew something on the wood. Well the scrollsaw and the belt sander both worked hard on the shaping and the ROS did the finishing touches. The size is about 11 inches long the handle is 5/8 wide while the blade part is 3/8 with a double taper. The blade depth is 2-3/8 inches. I am sorry, but, I do not know the wood species. It was quite hard. Identity will be appreciated too. Edited July 2, 2019 by rjR Suggested by a reader! MTCowpoke22, RabidAlien, Lucky2 and 2 others 5 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted July 1, 2019 Report Share Posted July 1, 2019 Looks good but looks more like a Norwegian butter knife. Blue text is a bit more difficult to read. :>) Quote Link to comment Share on other sites More sharing options...
daveww1 Posted July 2, 2019 Report Share Posted July 2, 2019 nice job Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted July 3, 2019 Report Share Posted July 3, 2019 Creativity at it's best. Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.