Iguanadon Posted July 6, 2019 Report Posted July 6, 2019 Cut 4 leash holders this morning from orders I took at my event this week. I'll be charging extra for the bull dog puppies version in the future. LOL These are drying and then I'll attach the hooks and drill the holes for wall mounting (I'm providing wall anchors). 4 hook options/colors (shown on the dachshund) Dave Monk, meflick, danny and 3 others 6 Quote
kmmcrafts Posted July 6, 2019 Report Posted July 6, 2019 Are you selling these patterns or are you just modifying the non-puzzle pattern to make what you need? I'm considering buying a lot of patterns from you maybe the non puzzle so I can make clocks and maybe some of these too.. Like the choice of hooks.. when i sold a few of these in the past I used a wooden dowel type and I wasn't super impressed.. I'm curious about your wall mounting? I see spots counter sunk for screws there on the front side.. anything offered for the back? You supply the screws? Thanks for the feedback.. I'm kinda looking for something to maybe replace my car themed things that I'm possibly fazing out.. Quote
Iguanadon Posted July 6, 2019 Author Report Posted July 6, 2019 8 minutes ago, kmmcrafts said: Are you selling these patterns or are you just modifying the non-puzzle pattern to make what you need? I'm considering buying a lot of patterns from you maybe the non puzzle so I can make clocks and maybe some of these too.. Like the choice of hooks.. when i sold a few of these in the past I used a wooden dowel type and I wasn't super impressed.. I'm curious about your wall mounting? I see spots counter sunk for screws there on the front side.. anything offered for the back? You supply the screws? Thanks for the feedback.. I'm kinda looking for something to maybe replace my car themed things that I'm possibly fazing out.. Hey Kevin, in order of your questions: 1) I print the non-puzzle pattern at about 105-107% enlarged slightly and I have the bone "pattern" printed and I simply tape the dog to the bone, mount it to the board and cut it. 2) My original thought was wooden dowels for the hooks, but couldn't find them at Lowe's while I was wandering around and ended up grabbing the coffee cup hooks just to do a mock-up then found the "J" hooks on Amazon at a very good price. 3) Yes, you see two countersunk holes for mounting and I'm going to supply the wall anchors and screws. I love these wall anchors, they screw into the wall and rarely "strip out". Quote
kmmcrafts Posted July 6, 2019 Report Posted July 6, 2019 4 minutes ago, Iguanadon said: Hey Kevin, in order of your questions: 1) I print the non-puzzle pattern at about 105-107% enlarged slightly and I have the bone "pattern" printed and I simply tape the dog to the bone, mount it to the board and cut it. 2) My original thought was wooden dowels for the hooks, but couldn't find them at Lowe's while I was wandering around and ended up grabbing the coffee cup hooks just to do a mock-up then found the "J" hooks on Amazon at a very good price. 3) Yes, you see two countersunk holes for mounting and I'm going to supply the wall anchors and screws. I love these wall anchors, they screw into the wall and rarely "strip out". Thanks Scott, Gives me something to ponder.. You may be seeing a order from me soon, LOL Quote
wombatie Posted July 7, 2019 Report Posted July 7, 2019 I am in love with the Bull dog puppies.. But they are all great, excellent work Scott. Marg Quote
scrollerpete Posted July 7, 2019 Report Posted July 7, 2019 Great job as usual, you are truly an entrepreneur Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.