Rockytime Posted July 25, 2019 Author Report Share Posted July 25, 2019 Another great suggestion. Thanks! That's what makes the Village so great. Quote Link to comment Share on other sites More sharing options...
Rockytime Posted July 25, 2019 Author Report Share Posted July 25, 2019 Another great suggestion. Thanks! That's what makes the Village so great. Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted July 25, 2019 Report Share Posted July 25, 2019 3 hours ago, danny said: Cool Mr Octooguy....any hints on the meaning? Never thought of using the Heat Gun. I am into another project now and same painters tape etc. so I will dust off the heat gun. Will let you know DTR.... Danny :+} Well, if you are wondering about my comment, we are under the total control of a repressive nanny-state government that tells us what we can have and what we can't have. We are allowed to have smelly old paint thinner but for some unknown reason we aren't allowed to have to more refined and almost odorless mineral spirits. Go figure! Quote Link to comment Share on other sites More sharing options...
danny Posted July 27, 2019 Report Share Posted July 27, 2019 Well I did give the Hair Blow Dryer a try. And I am Pleased. After off n on with the heat for maybe a minute with giving the pattern a yank Finally it All lifted Beautifully. And I Thank You for this Hint. Danny :+} OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Ron C. Posted September 6 Report Share Posted September 6 I am a beginner here even though I have had a scroll saw for many years. I recently upgraded from my uncles gift to me some 40 years ago of a 16" Craftsman pinned blade to an RBI 226 VS. Man I love it. Anyhow, I have been using 2 inch painter's tape before pattern lay down and I hated the time it took me to remove the pattern with the 2 inch tape after fret work. I got to thinking do they make a wider tape and sure enough they do. I am now using 4 inch tape on my bigger projects and I love it. Quote Link to comment Share on other sites More sharing options...
rjweb Posted September 7 Report Share Posted September 7 Wow, this is scary, I thought it was a current post by our good friend Rocky, RJ Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted September 7 Report Share Posted September 7 1 hour ago, rjweb said: Wow, this is scary, I thought it was a current post by our good friend Rocky, RJ I know these old topics keep coming back to life and remind us of our good friend.. RIP Rocky Quote Link to comment Share on other sites More sharing options...
BadBob Posted September 8 Report Share Posted September 8 For fretwork, I glue the pattern directly to the wood. When I am done cutting, I remove the pattern by wetting it with solvent. After it sits for a short time, the pattern comes off in one piece. I use mineral spirits for the solvent and 3M77 for my adhesive. You may need a different solvent for your adhesive. Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.