RabidAlien Posted July 27, 2019 Report Posted July 27, 2019 Two dragon patterns I found on Google. Cut in 3/8" BB ply (I think....they were sized right and came out of my scrap pile). Pieces are stained Dark Walnut with a clear satin lacquer, backer is neon green rattlecan with a clear glossy lacquer. These two will be the front and back panel of a dice tower (basically an enclosed box with an opening at the top and bottom, and angled baffles inside so that when you drop dice in they bounce around and roll randomly, no chance of someone trying to manipulate a roll). The right-hand dragon is shorter to leave an opening at the bottom of the tower for the dice to exit. I'll post a pic of the final product when I get it finished. I couldn't really find any good step-by-step plans, so this was mostly "take a look at a bunch of pictures and then give it a solid try". jollyred, Phantom Scroller, Ptofimpact and 6 others 9 Quote
JimErn Posted July 27, 2019 Report Posted July 27, 2019 Very nice cutting Steve Good had a dice tower in one of his plans some time ago, maybe that will help some https://www.stevedgood.com/catalog/index.php Hmmm, that appears to be just the index page odd that you can not link to the results page, enter dice tower in the search box and it will come up RabidAlien 1 Quote
RabidAlien Posted July 27, 2019 Author Report Posted July 27, 2019 3 hours ago, JimErn said: Very nice cutting Steve Good had a dice tower in one of his plans some time ago, maybe that will help some https://www.stevedgood.com/catalog/index.php Hmmm, that appears to be just the index page odd that you can not link to the results page, enter dice tower in the search box and it will come up I checked a bunch of different sites, forums, boards, etc....never thought to check Steve Good's site! I'm heading outside to kick myself in the ass a few times... bobscroll 1 Quote
JimErn Posted July 27, 2019 Report Posted July 27, 2019 41 minutes ago, RabidAlien said: I checked a bunch of different sites, forums, boards, etc....never thought to check Steve Good's site! I'm heading outside to kick myself in the ass a few times... I prefer to administer 30 lashes with a wet noodle RabidAlien 1 Quote
RabidAlien Posted July 27, 2019 Author Report Posted July 27, 2019 2 hours ago, JimErn said: I prefer to administer 30 lashes with a wet noodle Been on a carb-free diet for about six months now....I'm afraid I'd eat the noodle and gain back three pounds. LOL Quote
Rockytime Posted July 27, 2019 Report Posted July 27, 2019 Very nice cutting! Can't help you about the noodle. :>) RabidAlien 1 Quote
wombatie Posted July 28, 2019 Report Posted July 28, 2019 They look good. Great work. Marg RabidAlien 1 Quote
RabidAlien Posted August 4, 2019 Author Report Posted August 4, 2019 Tower worked great! It was a "figure out measurements/dimensions as I go" sorta project, so it's not the neatest or cleanest thing I've ever built, but the cover fits and converts into the dice output tray (keeps them from shooting off the end of the table). Next time, I'll use the Steve Good pattern. bobscroll 1 Quote
bobscroll Posted August 5, 2019 Report Posted August 5, 2019 Very nice work there Mr RapidAlien-Kirk! Gives it a classic look I think! Bob RabidAlien 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.