Popular Post JimErn Posted July 29, 2019 Popular Post Report Share Posted July 29, 2019 getting the hang of this inlay stuff, a tweak here and there and then I can try something difficult Dave Monk, danny, frankorona and 11 others 14 Quote Link to comment Share on other sites More sharing options...
flarud Posted July 29, 2019 Report Share Posted July 29, 2019 I like it! It's on my list of things to try. JimErn 1 Quote Link to comment Share on other sites More sharing options...
spirithorse Posted July 29, 2019 Report Share Posted July 29, 2019 Nicely done! Thanks for sharing and God Bless! Spirithorse JimErn 1 Quote Link to comment Share on other sites More sharing options...
rjweb Posted July 29, 2019 Report Share Posted July 29, 2019 Very nice work, it is on my list to do some day, RJ JimErn 1 Quote Link to comment Share on other sites More sharing options...
meflick Posted July 29, 2019 Report Share Posted July 29, 2019 I agree, I believe you have gotten a good hang of it. I look forward to seeing what you do next. It is also on my “to try” list. Any tips or tricks you have figured out? JimErn and amazingkevin 1 1 Quote Link to comment Share on other sites More sharing options...
MTCowpoke22 Posted July 29, 2019 Report Share Posted July 29, 2019 I agree. Beautiful work. JimErn 1 Quote Link to comment Share on other sites More sharing options...
lawson56 Posted July 29, 2019 Report Share Posted July 29, 2019 Oh I say you have got it down pat.Awesome work!! JimErn 1 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted July 30, 2019 Report Share Posted July 30, 2019 WOW! Those look terrific! JimErn 1 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted July 30, 2019 Report Share Posted July 30, 2019 Beautiful work Jim.. Someday I'm going to give inlay another go.. If I ever get out of clock and ornament mode LOL JimErn 1 Quote Link to comment Share on other sites More sharing options...
JimErn Posted July 30, 2019 Author Report Share Posted July 30, 2019 12 hours ago, meflick said: I agree, I believe you have gotten a good hang of it. I look forward to seeing what you do next. It is also on my “to try” list. Any tips or tricks you have figured out? I may have to look for another excaliber style saw if I decide to do this a lot, right now I like it more than fretwork. The angle of the bevel cut is the issue, I would love to set one saw to the perfect angle and leave it. Of course the perfect angle is another issue. The graduations at the bottom of the ex for tilt are not defined enough to reset it accurately each time. I ordered an angle meter, it came in the mail last night, so over the next few days I will work with it. tips? stack cut the bottom and top I went to mitered corners cause I could not keep the rounded ones identical with the sanding, those rounded corners drove me nuts on the first three boxes. cut the wall piece, then use that to make the cut pattern on the locator piece you will glue to the top piece so it sits well on top I am such a skinflint, as Dad would say. I have the cutout pieces of inlay from the tops sitting around trying to figure out what to do with them, and also the center of the wall cutouts too meflick, amazingkevin and Dave Monk 3 Quote Link to comment Share on other sites More sharing options...
butch1008 Posted July 30, 2019 Report Share Posted July 30, 2019 looks great JimErn 1 Quote Link to comment Share on other sites More sharing options...
meflick Posted July 30, 2019 Report Share Posted July 30, 2019 6 hours ago, JimErn said: I may have to look for another excaliber style saw if I decide to do this a lot, right now I like it more than fretwork. The angle of the bevel cut is the issue, I would love to set one saw to the perfect angle and leave it. . . . That is EXACTLY why, when DH bought my Seyco saw for me a couple of years ago, and then wanted to move out my Excalibur saw I said NO - I NEED them both. I want to use the Excalilbur for angle cuts like this and want to be able to set it and leave it. Not sure he understood exactly why since he doesn't use the scroll saws and I'm sure he rolled his eyes at me but he set it up so I still have them both in "his" workshop. Quote Link to comment Share on other sites More sharing options...
Dave Monk Posted July 30, 2019 Report Share Posted July 30, 2019 6 hours ago, JimErn said: I may have to look for another excaliber style saw if I decide to do this a lot, right now I like it more than fretwork. The angle of the bevel cut is the issue, I would love to set one saw to the perfect angle and leave it. Of course the perfect angle is another issue. The graduations at the bottom of the ex for tilt are not defined enough to reset it accurately each time. I ordered an angle meter, it came in the mail last night, so over the next few days I will work with it. tips? stack cut the bottom and top I went to mitered corners cause I could not keep the rounded ones identical with the sanding, those rounded corners drove me nuts on the first three boxes. cut the wall piece, then use that to make the cut pattern on the locator piece you will glue to the top piece so it sits well on top I am such a skinflint, as Dad would say. I have the cutout pieces of inlay from the tops sitting around trying to figure out what to do with them, and also the center of the wall cutouts too Super nice work there. It makes it soo much easier having two saws when doing inlays. amazingkevin and JimErn 1 1 Quote Link to comment Share on other sites More sharing options...
JimErn Posted July 30, 2019 Author Report Share Posted July 30, 2019 4 hours ago, meflick said: That is EXACTLY why, when DH bought my Seyco saw for me a couple of years ago, and then wanted to move out my Excalibur saw I said NO - I NEED them both. I want to use the Excalilbur for angle cuts like this and want to be able to set it and leave it. Not sure he understood exactly why since he doesn't use the scroll saws and I'm sure he rolled his eyes at me but he set it up so I still have them both in "his" workshop. Well let him know that if it is getting in the way, I have two friends in TN that will drive over and get it for me (one on each end of the state), no shipping involved amazingkevin and meflick 1 1 Quote Link to comment Share on other sites More sharing options...
wombatie Posted July 31, 2019 Report Share Posted July 31, 2019 And I believe you have. Excellent work. Marg JimErn 1 Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted August 6, 2019 Report Share Posted August 6, 2019 When your good it shows, Take a well deserved bow my friend Quote Link to comment Share on other sites More sharing options...
Miran Posted August 6, 2019 Report Share Posted August 6, 2019 Amazing Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.