Popular Post Miran Posted August 21, 2019 Popular Post Report Share Posted August 21, 2019 When Alex posted the Howling Wolf topic.....I just had to buy the pattern And of course as just a beginner quit hard pattern of course. BUT hey I am me and I just had to try as my third project when my second project was drying and before I could put the hooks on that one........ So I just printed the pattern and started. WHAHAHAHHA well that was easier said then done Before I was on the third layer I already broke about 7 blades, went a bit wrong here and there and really was broken because I was so concentrating on doing it right that I had to stop. BUT the next day, after I had finished my project for our dog leashes, it just kept on calling me.....do you know that feeling? So I just wanted to go on again and of course I flew through the blades I had hahahaha, had to order new ones otherwise I could not even finish it Luckily they arrived the next day so I was just jumping from joy that I could go on breaking some more This all said I finished it today and to be honest....I am quit proud at myself for how it turned out. Maybe not the very best but as my third project I am very pleased with it amazingkevin, barb.j.enders, Dave Monk and 11 others 14 Quote Link to comment Share on other sites More sharing options...
JimErn Posted August 21, 2019 Report Share Posted August 21, 2019 very very nice Miran 1 Quote Link to comment Share on other sites More sharing options...
bobscroll Posted August 21, 2019 Report Share Posted August 21, 2019 Hi Miran, It's not about just getting it done...It's about the journey getting there! And the reward is for us all to see and say what a great job you did on your project!!! Thank you for showing us, Bob Miran 1 Quote Link to comment Share on other sites More sharing options...
Foxfold Posted August 21, 2019 Report Share Posted August 21, 2019 You did an amazing job cutting that. I couldn't cut anything near as good on my 3rd go. Congratulations, Miran 1 Quote Link to comment Share on other sites More sharing options...
trackman Posted August 21, 2019 Report Share Posted August 21, 2019 How in the world do you break 7 blades? Something isn’t right with your saw. I been scrolling for 10 years and maybe broken 3 blades due to cutting 1 1/2” stock. Had blades come loose from the clamp an get bent but not break. Miran 1 Quote Link to comment Share on other sites More sharing options...
Miran Posted August 21, 2019 Author Report Share Posted August 21, 2019 9 minutes ago, trackman said: How in the world do you break 7 blades? Something isn’t right with your saw. I been scrolling for 10 years and maybe broken 3 blades due to cutting 1 1/2” stock. Had blades come loose from the clamp an get bent but not break. To much tension on it and turn to fast during to much tension. Really then they break Quote Link to comment Share on other sites More sharing options...
Miran Posted August 21, 2019 Author Report Share Posted August 21, 2019 2 hours ago, bobscroll said: Hi Miran, It's not about just getting it done...It's about the journey getting there! And the reward is for us all to see and say what a great job you did on your project!!! Thank you for showing us, Bob Didn't meant it as just getting it done....more like wanted to see how it will turn out so just wanted to go on with it,,,,,( leaving the things that really had to be done for it WHAHAHAHA) Quote Link to comment Share on other sites More sharing options...
lawson56 Posted August 21, 2019 Report Share Posted August 21, 2019 I have broken many blades when I first started,know the feeling well.You did a Fantastic job!! Miran 1 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted August 21, 2019 Report Share Posted August 21, 2019 WOW! You did a terrific job. Miran 1 Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted August 22, 2019 Report Share Posted August 22, 2019 Nice job. A big pat on the back for this accomplishment Dick heppnerguy Miran 1 Quote Link to comment Share on other sites More sharing options...
Scrolling Steve Posted August 22, 2019 Report Share Posted August 22, 2019 That turned out great ! Miran 1 Quote Link to comment Share on other sites More sharing options...
don watson Posted August 22, 2019 Report Share Posted August 22, 2019 Very well done. Miran 1 Quote Link to comment Share on other sites More sharing options...
daveww1 Posted August 22, 2019 Report Share Posted August 22, 2019 super job Miran 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted August 22, 2019 Report Share Posted August 22, 2019 Nice job. When I first learned how to use my Hegner, I broke a lot of blades. Rarely broke blades on the other saws I have had. Now I rarely break any on the Hegner. Miran 1 Quote Link to comment Share on other sites More sharing options...
alexfox Posted August 23, 2019 Report Share Posted August 23, 2019 Exellent cutting! After this project you can say that you are intermediate level scroller, not a beginner bobscroll and Miran 1 1 Quote Link to comment Share on other sites More sharing options...
Miran Posted August 24, 2019 Author Report Share Posted August 24, 2019 On 8/23/2019 at 1:28 PM, alexfox said: Exellent cutting! After this project you can say that you are intermediate level scroller, not a beginner Coming from you on your own design: Thank you Quote Link to comment Share on other sites More sharing options...
wombatie Posted August 25, 2019 Report Share Posted August 25, 2019 You did an excellent job, well done. Maybe be you were pushing too hard against the blades. Marg Miran 1 Quote Link to comment Share on other sites More sharing options...
Miran Posted August 25, 2019 Author Report Share Posted August 25, 2019 1 hour ago, wombatie said: You did an excellent job, well done. Maybe be you were pushing too hard against the blades. Marg Yes, in turning I still find it sometimes a bit hard to stay in the right tension on the blades Quote Link to comment Share on other sites More sharing options...
rdatelle Posted August 25, 2019 Report Share Posted August 25, 2019 Miran, that still came out great for a beginner. We've all broke blades and I'm still breaking some now and then. Sometimes stack cutting a project like that makes it easier to cut. Also depends on the type blade your using. Miran 1 Quote Link to comment Share on other sites More sharing options...
Phantom Scroller Posted August 25, 2019 Report Share Posted August 25, 2019 Yabba dabba doo well done you. Roly Miran 1 Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted August 31, 2019 Report Share Posted August 31, 2019 No rain No Rainbow! Quiters never win , Winners never quit. Your going to be the one to watch here in the village.What determination you have!!!!!! Miran 1 Quote Link to comment Share on other sites More sharing options...
Miran Posted August 31, 2019 Author Report Share Posted August 31, 2019 (edited) 1 hour ago, amazingkevin said: No rain No Rainbow! Quiters never win , Winners never quit. Your going to be the one to watch here in the village.What determination you have!!!!!! Thank you. Well this week normal live begins again so not much time but loving it. So I certainly will try to show sometimes some things I made with wood Edited August 31, 2019 by Miran used defiantly while I meant certainly amazingkevin 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.