Popular Post Foxfold Posted August 24, 2019 Popular Post Report Share Posted August 24, 2019 My first time using spiral blades along side my flat blades. I found the spiral quite 'scary', mainly because I'm relatively comfortable with my flat blades and I like nice 'clean' points and corners and the spirals gave me neither. . However, I'm not unhappy with the outcome and I can see that they have a place in my 'tool box', just not too often I think. !! Fab4, jollyred, don watson and 15 others 18 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted August 24, 2019 Report Share Posted August 24, 2019 (edited) I'd say that turned out very well. I saw a Charles Dearing Video a couple years ago where Charles was showing how he could make a sharp inside point using a Spiral. I never could do it. But he also never used less than a #5 spiral, I never use bigger than an 2/0 so maybe with a bigger blade it may be possible. In the half way done update you posted it looked to me like you had colored the eye on that tiger. Maybe it was just my eyes registering incorrectly, my eyes do some funny things. But it looked good... what happen? Edited August 24, 2019 by Scrappile Foxfold 1 Quote Link to comment Share on other sites More sharing options...
Foxfold Posted August 24, 2019 Author Report Share Posted August 24, 2019 (edited) 4 minutes ago, Scrappile said: In the half way done update you posted it looked to me like you had colored the eye on that tiger. Maybe it was just my eyes registering incorrectly, my eyes do some funny things. But it looked good... what happen? It was just where the pattern had torn and come off the wood. I think it just showed up very 'brown' against the white paper, I've done nothing to it at all. xx Edited August 24, 2019 by Foxfold Scrappile 1 Quote Link to comment Share on other sites More sharing options...
RabidAlien Posted August 24, 2019 Report Share Posted August 24, 2019 Looks great to me! Foxfold 1 Quote Link to comment Share on other sites More sharing options...
Miran Posted August 24, 2019 Report Share Posted August 24, 2019 Looks great Foxfold 1 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted August 25, 2019 Report Share Posted August 25, 2019 You've done a dynamite job. The cutting looks superb and I love the pattern. Who makes the pattern? Foxfold 1 Quote Link to comment Share on other sites More sharing options...
Gonzo Posted August 25, 2019 Report Share Posted August 25, 2019 Very nice! Foxfold 1 Quote Link to comment Share on other sites More sharing options...
Charlie E Posted August 25, 2019 Report Share Posted August 25, 2019 Very nice! Cute little tiger. Foxfold 1 Quote Link to comment Share on other sites More sharing options...
wombatie Posted August 25, 2019 Report Share Posted August 25, 2019 I hate spirals and have used 3 spiral blades to make maybe a 4 inch cut and that was only because the project was too big to turn with flat blades so HAD to use the spirals and I broke 2 of them. So I take my hat off to you, excellent job. Marg Foxfold 1 Quote Link to comment Share on other sites More sharing options...
lawson56 Posted August 25, 2019 Report Share Posted August 25, 2019 Looks Down Right Awesome!! I have tried Spirals several times,just can't get the hang of it.Kuddos to you and all who use Spirals Foxfold 1 Quote Link to comment Share on other sites More sharing options...
daveww1 Posted August 25, 2019 Report Share Posted August 25, 2019 very nice job Foxfold 1 Quote Link to comment Share on other sites More sharing options...
bobscroll Posted August 25, 2019 Report Share Posted August 25, 2019 Very nice work indeed Brenda, I love that portrait you've done! Thank you for showing us, Bob Foxfold 1 Quote Link to comment Share on other sites More sharing options...
don watson Posted August 25, 2019 Report Share Posted August 25, 2019 Very well done Brenda. Looks pretty cute. Foxfold 1 Quote Link to comment Share on other sites More sharing options...
flarud Posted August 25, 2019 Report Share Posted August 25, 2019 10 hours ago, lawson56 said: Looks Down Right Awesome!! I have tried Spirals several times,just can't get the hang of it.Kuddos to you and all who use Spirals You took the words right out of my mouth! lawson56 and Foxfold 1 1 Quote Link to comment Share on other sites More sharing options...
Foxfold Posted August 25, 2019 Author Report Share Posted August 25, 2019 19 hours ago, Rockytime said: You've done a dynamite job. The cutting looks superb and I love the pattern. Who makes the pattern? It's an H Botas pattern. Rockytime 1 Quote Link to comment Share on other sites More sharing options...
MTCowpoke22 Posted August 26, 2019 Report Share Posted August 26, 2019 Looks good. I share your opinion of spiral blades. They serve their purpose, but are not my preferred means of scrolling. Foxfold 1 Quote Link to comment Share on other sites More sharing options...
Bill WIlson Posted August 26, 2019 Report Share Posted August 26, 2019 Well done Brenda. Now that you see what spirals are capable of and what you are capable of, you may find that you end up using them more than you might think. Wilson142 and Foxfold 1 1 Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted August 26, 2019 Report Share Posted August 26, 2019 an amazing job. Your work is very nice and I can see that there is nothing that can stop you from taking on anything you think you would like to cut. I really like this one, too Dick heppnerguy Foxfold 1 Quote Link to comment Share on other sites More sharing options...
spirithorse Posted August 27, 2019 Report Share Posted August 27, 2019 Beautiful work! Thanks for sharing and God Bless! Spirithorse Foxfold 1 Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted August 31, 2019 Report Share Posted August 31, 2019 We have members here all female that learned on spirals and have stuck with them. Judging from your exhibit here I'd say the same was true for you!!! Your a natural with them. Spirals give the look you just can't get with a flat blade. Keep em coming!!! Foxfold 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.