Let’s Go Fishing

[Hermit]

Another Alex Fox cut. First time using Zebrawood. Really like the contrast between the frame and the piece. The frame was finished with 50/50 wipe on poly/mineral spirits, 3 coats. Then 4-5 coats of semi gloss lacquer after a week. All cut with an Olson 2/0 Blade. I used African Mahogany for the splines. 

[Woodrush]

Very nicely done

[amazingkevin]

6 hours ago, Woodrush said:

Very nicely done

6 hours ago, Hermit said:

Another Alex Fox cut. First time using Zebrawood. Really like the contrast between the frame and the piece. The frame was finished with 50/50 wipe on poly/mineral spirits, 3 coats. Then 4-5 coats of semi gloss lacquer after a week. All cut with an Olson 2/0 Blade. I used African Mahogany for the splines. 

This is the coolest fishing project. I am very happy to see this one. Excellently cut,pro scroller from sacrameto.So that's where the good scrollers come from.500atya boys Joe.This is the best!!!

[meflick]

Beautiful job. Thanks for showing.

[Rockytime]

That is a fantastic pattern and you did a great job of cutting and finishing! I had never heard about 50/50 poly and mineral spirits. Have to try that.

[Ron Johnson]

That is totally AWESOME!!!! 

[wombatie]

Very impressive.

Marg

[alexfox]

Exellent cuttind and good looking frame

[lawson56]

GOO GOOGLY GOO!!! That is Just one Awesome cutting!!!!!

 

 

[daveww1]

beautiful, amazing job

[Wilson142]

Really like the cutting and the frame is great. Nicely finished.

[Scrappile]

Great picture.  Well done!

[Phantom Scroller]

Now that is a good cut with frame. Roly