OzarkSawdust Posted September 30, 2019 Report Share Posted September 30, 2019 Finished up the second CHIEFS plaque. I enlarged the arrowhead an inch and redid the CHIEFS enlarging and moved the spacing slightly. This one went smooth and quickly! I knew the problems I ran into on the first, thanks for all the help guys, and I used Pegas #5. I think this one's good enough to sell...? Watcha think? Would you sell as is...or do a frame? frankorona, amazingkevin, Dave Monk and 6 others 9 Quote Link to comment Share on other sites More sharing options...
Ron Johnson Posted September 30, 2019 Report Share Posted September 30, 2019 Fine work Gary. No frame. I would chamfer a 45 around the edge . OzarkSawdust and amazingkevin 1 1 Quote Link to comment Share on other sites More sharing options...
wombatie Posted September 30, 2019 Report Share Posted September 30, 2019 You did a great job, well done. Marg OzarkSawdust 1 Quote Link to comment Share on other sites More sharing options...
daveww1 Posted September 30, 2019 Report Share Posted September 30, 2019 terrific job OzarkSawdust 1 Quote Link to comment Share on other sites More sharing options...
OzarkSawdust Posted September 30, 2019 Author Report Share Posted September 30, 2019 9 hours ago, Ron Johnson said: Fine work Gary. No frame. I would chamfer a 45 around the edge . That's a good idea Ron! I didn't think of that. I think I've got a router bit for that somewhere in the shop. Would you just stain the edges the same...dark stain...or paint chamfer black? I'm no good yet on finishes. amazingkevin 1 Quote Link to comment Share on other sites More sharing options...
Ron Johnson Posted October 1, 2019 Report Share Posted October 1, 2019 Hi Gary. I would do a champher edge using a block plane (¼" champher) cutting the corners ever so lightly to eliminate tear out. My preference would be to apply same finish throughout but darkning the edge would look okay as well. OzarkSawdust 1 Quote Link to comment Share on other sites More sharing options...
Norm Fengstad Posted October 1, 2019 Report Share Posted October 1, 2019 Thanks for sharing , looks good as it sits now , framed would also be good. I copied and saved the picture as my son is a Chiefs fan, maybe I will do something like it if that is o.k with you Norm Fengstad, Nipawin, Saskatchewan, Canada OzarkSawdust 1 Quote Link to comment Share on other sites More sharing options...
edward Posted October 1, 2019 Report Share Posted October 1, 2019 I would put it in a frame. OzarkSawdust 1 Quote Link to comment Share on other sites More sharing options...
OzarkSawdust Posted October 1, 2019 Author Report Share Posted October 1, 2019 5 hours ago, Norm Fengstad said: Thanks for sharing , looks good as it sits now , framed would also be good. I copied and saved the picture as my son is a Chiefs fan, maybe I will do something like it if that is o.k with you Norm Fengstad, Nipawin, Saskatchewan, Canada Sure, I'll come back tonight and give you the details. Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted October 1, 2019 Report Share Posted October 1, 2019 Well done!!! OzarkSawdust 1 Quote Link to comment Share on other sites More sharing options...
spirithorse Posted October 1, 2019 Report Share Posted October 1, 2019 Looks great! I was going to make a suggestion like Ron did above but, my first thought was a Roman Ogee bit routed edge. If you route the edge, when you stain the wood, the routed edge will naturally be a darker hue. Just the nature of of how much stain absorbs into the end grain compared to the surface. God Bless! Spirithorse OzarkSawdust 1 Quote Link to comment Share on other sites More sharing options...
Dad_Tech77 Posted October 9, 2019 Report Share Posted October 9, 2019 Love this and wonderful job...question as I was informed of this as well when I was cutting NHL logos about the requirement to have a license to sell these.....is this still required? Just wanted to check if anyone knows for sure.....thank you for sharing.....sorry Eagles fan here Thank you Ed Quote Link to comment Share on other sites More sharing options...
OzarkSawdust Posted October 9, 2019 Author Report Share Posted October 9, 2019 I have heard that...bot have no real legal knowledge of it. I got the logo off of Rapid Resizer, I figure it's fair game. Also I'm not worried about hand making and selling a couple at a flea market...but if I was making a ton of them with a big display it might be a different story. Dad_Tech77 1 Quote Link to comment Share on other sites More sharing options...
Dad_Tech77 Posted October 9, 2019 Report Share Posted October 9, 2019 27 minutes ago, OzarkSawdust said: I have heard that...bot have no real legal knowledge of it. I got the logo off of Rapid Resizer, I figure it's fair game. Also I'm not worried about hand making and selling a couple at a flea market...but if I was making a ton of them with a big display it might be a different story. Best of luck with the sales and please be careful....great work too!! OzarkSawdust 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.