OzarkSawdust Posted October 16, 2019 Report Share Posted October 16, 2019 Got my scroll saw stand in today. Even got it put together! It has 3 height settings, I used the lowest. Found a 3/4" x 2' x 2' piece of Luan plywood on my wood cart, so I trimmed the edges slightly and used it as a top. The bench to the right in the picture is my Crappie jig/fly tying bench, that's what I had my scroll saws on so far. This is about 5" lower. I'll still use a stool, but it allows my forearms to be almost level, like sitting at my desk working on the computer. I think it will be more comfortable cutting, relaxing my shoulders. If not I can raise it 2 more positions. namunolie, meflick, Foxfold and 4 others 6 1 Quote Link to comment Share on other sites More sharing options...
scrollingforsanity Posted October 16, 2019 Report Share Posted October 16, 2019 Looks very nice. I believe you will enjoy your setup. Wish I was back there crappie fishing with you. I am Originally from Clinton, Mo. I was back there in late May but there was a ton of water. Of course everything has changed for me since I left just as they were thinking about putting in Truman dam at Warsaw. All my old stomping grounds are under water. Enjoy your new saw and let us see some pictures of your projects please. grizz OzarkSawdust and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
Jim McDonald Posted October 16, 2019 Report Share Posted October 16, 2019 Nothing like a proper stand to take the tension off your shoulders. (And nothing a fresh crappie sandwich) OzarkSawdust and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
herrwood Posted October 16, 2019 Report Share Posted October 16, 2019 Looks good, as long as it's comfortable for you that is perfect when you put in some long hours at the saw OzarkSawdust, OCtoolguy and scrollingforsanity 3 Quote Link to comment Share on other sites More sharing options...
Ron Johnson Posted October 16, 2019 Report Share Posted October 16, 2019 Nice set up Gary. Enjoy. OCtoolguy, scrollingforsanity and OzarkSawdust 2 1 Quote Link to comment Share on other sites More sharing options...
namunolie Posted October 16, 2019 Report Share Posted October 16, 2019 I got same stand but It is higher than my ex stand I got some pain after long time work it is not asian height but it is good for you OCtoolguy, scrollingforsanity and OzarkSawdust 3 Quote Link to comment Share on other sites More sharing options...
OzarkSawdust Posted October 16, 2019 Author Report Share Posted October 16, 2019 10 hours ago, scrollingforsanity said: Looks very nice. I believe you will enjoy your setup. Wish I was back there crappie fishing with you. I am Originally from Clinton, Mo. I was back there in late May but there was a ton of water. Of course everything has changed for me since I left just as they were thinking about putting in Truman dam at Warsaw. All my old stomping grounds are under water. Enjoy your new saw and let us see some pictures of your projects please. grizz With all the rain last spring, and most of the summer this year, not only were the ramps closed...but the roads to them were under water too! Truman is great Crappie fishing. In fact Crappie Masters has held 4 or 5 tournaments there the last two years...including the National Championship. I live closer to Stockton Lake and it's good fishing too. Crappie and Bass both. OCtoolguy and scrollingforsanity 2 Quote Link to comment Share on other sites More sharing options...
scrollingforsanity Posted October 16, 2019 Report Share Posted October 16, 2019 I got to see first hand the ramps closed and the water over the roads. Had to back my fifth wheel up about a half mile due to taking a wrong turn to a campground. I moved away 43 years ago but still miss the fishing. I do not miss the humidity though. . OCtoolguy and OzarkSawdust 2 Quote Link to comment Share on other sites More sharing options...
OzarkSawdust Posted October 16, 2019 Author Report Share Posted October 16, 2019 25 minutes ago, scrollingforsanity said: I got to see first hand the ramps closed and the water over the roads. Had to back my fifth wheel up about a half mile due to taking a wrong turn to a campground. I moved away 43 years ago but still miss the fishing. I do not miss the humidity though. . You should have some great fishing there on the Columbia River! We were out there a couple of yrs ago. Spent about 3 1/2 months in the 5th wheel. One of my son-in-laws is a Naval officer and was stationed at Whidbey Island WA north of Seattle. After their place we went to spend some time with some close friends of ours in Medford OR. Then on to a week at a RV park in the Redwood Forest. Followed by a week over 4th of July at Napa, we use to manage a retirement property there so we knew the best wineries! It's all beautiful out there! OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted October 16, 2019 Report Share Posted October 16, 2019 My folks use to own a home on Whidbey Island. Beautiful place to live. OzarkSawdust and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
scrollingforsanity Posted October 17, 2019 Report Share Posted October 17, 2019 It is beautiful here. Whidbey island is also. Unfortunately the fishing here in the Columbia has really declined. The Salmon and Steelhead runs are so low they have closed the fishing the last two years. I think it will be some time before or if it recovers. My boat just sits in the garage. They had a phenomenal Walleye fishery but they took the retention and size limit off for them a couple years ago and they are far and few between now. Are you taking your saw traveling with you in your 5th wheel? grizz OCtoolguy and OzarkSawdust 2 Quote Link to comment Share on other sites More sharing options...
OzarkSawdust Posted October 18, 2019 Author Report Share Posted October 18, 2019 On 10/16/2019 at 11:07 AM, Scrappile said: My folks use to own a home on Whidbey Island. Beautiful place to live. The kid's house was in Oak Harbor on the south side of the golf course. We camped at Deception Pass State Park. They had a nice lake in the park full of trout...I fished almost every morning! OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OzarkSawdust Posted October 18, 2019 Author Report Share Posted October 18, 2019 On 10/16/2019 at 7:58 PM, scrollingforsanity said: It is beautiful here. Whidbey island is also. Unfortunately the fishing here in the Columbia has really declined. The Salmon and Steelhead runs are so low they have closed the fishing the last two years. I think it will be some time before or if it recovers. My boat just sits in the garage. They had a phenomenal Walleye fishery but they took the retention and size limit off for them a couple years ago and they are far and few between now. Are you taking your saw traveling with you in your 5th wheel? grizz That's the plan. That is one of the reasons I got the King 16" instead of a 21". It and the little benchtop drill press will ride in the front cargo hold. I normally carry a Barker 42gal. blue tote there, but we will be in full hookups the whole 4+ months so it won't be needed. I'll pack foot pedal, sanders, misc. tools and supplies in a tote or two that will ride in the main cargo hold. Also my stand breaks down to legs and a couple of braces to go in one of the cargo holds. I'll take some BB ply. and put in an order as soon as I get there, and pick up hardwood (or order) locally. I plan to do a lot of cutting and selling (hopefully) as we'll be in the Rio Grande Valley for almost 4 months. While it's cold and snowy I'll be sitting outside in the sun, in shorts and a T shirt, cutting patterns I'll take my laptop and files, but may look for a smaller printer to print and copy patterns. Yes folks...it's the Ozark Sawdust Road Show! Scroller on the road..... Dave Monk and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
scrollingforsanity Posted October 18, 2019 Report Share Posted October 18, 2019 That sounds like its going to be a great trip. I hope you do well selling your crafts. I hope you post pictures and results. We only go for three or four weeks at a time so far so I don't anticipate taking my saw with me any time soon. Maybe someday. Good luck, have a safe trip. Take care grizz OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted October 18, 2019 Report Share Posted October 18, 2019 Heck, I couldn't take a scroll saw if I wanted to.... no room after my wife packs her quilting stuff, including sewing table and sewing machine..... we only have a 25' trailer... OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Foxfold Posted October 18, 2019 Report Share Posted October 18, 2019 (edited) On 10/16/2019 at 2:30 AM, OzarkSawdust said: The bench to the right in the picture is my Crappie jig/fly tying bench I've just choked on my coffee, I'm so, so sorry but that sentence means something totally different over here. Never was I so pleased to look on the Internet for a 'translation' I thought you were being rather hard on yourself as I thought your bench looked fine Over here Crappy/Crappie means 'Totally Rubbish' My sincere apologies, from an old English Lady. Have a Great trip. xx Edited October 18, 2019 by Foxfold JimErn, OCtoolguy and OzarkSawdust 3 Quote Link to comment Share on other sites More sharing options...
OzarkSawdust Posted October 18, 2019 Author Report Share Posted October 18, 2019 1 hour ago, Foxfold said: I've just choked on my coffee, I'm so, so sorry but that sentence means something totally different over here. Never was I so pleased to look on the Internet for a 'translation' I thought you were being rather hard on yourself as I thought your bench looked fine Over here Crappy/Crappie means 'Totally Rubbish' My sincere apologies, from an old English Lady. Have a Great trip. xx Brenda...I can almost see your face when reading that... Just to be clear...These are the Crappie Jigs I tie. This is a Crappie (very good eating). Here is one of the Louisiana Bayou, one of my favorite places to fish. And here is one of the thousands of alligator in the bayou...he also likes crappie! Now you're ready to come to the US and go fishing! OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Foxfold Posted October 18, 2019 Report Share Posted October 18, 2019 We call them 'lures' over here, your 'bayou' looks absolutely beautiful, the alligator looks a little scary. Have a wonderful time while you are away. So glad you took my 'dilemma' in good part and were not offended by my comments. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Jim McDonald Posted October 19, 2019 Report Share Posted October 19, 2019 That's a good sized "slabber" you caught. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.