Jump to content
🎄 🎄 🎄 2024 Custom Ornament Business Kit - Now Available - SALE 50% Off Through Dec. 2nd ×

Christmas Ornaments


Sycamore67

Recommended Posts

I cut the tiny Reindeer with a FD #1 blade on my Hegner using a jig like shown below but smaller.  It is similar to the one Steve Good shows but I use springs on the 10-24 bolts.  I find that without the springs that the piece will come loose as you cut it.  I also use sandpaper on the inside to hold the piece tight.    I am using a 3X Ottlite which has a very good glass lens.  Another change to the jig has been to add some small knobs on top of it to more easily hold the jig.  I find that I tend to grip the jib too tightly and it causes me to have cutting problems and sore hands.  I like to cut the very small ones from Maple or some other fine grain hardwood without strong growth rings like Oak, Ash and some others.  

2051192022_20191125_Jig(Medium).thumb.jpg.a37d1eb4f6e9dfd6c9f8811866d37a70.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...