Popular Post courtym74 Posted December 14, 2019 Popular Post Report Share Posted December 14, 2019 Not scroll saw work but wanted to brag a bit. Customer asked if I could make him some cutting boards using wooden wine crates that he had collected. Cut and put them together in a puzzle style. He didn't want them to actually cut on them but more to hold limes, and glasses and such. More as a serving tray I suppose. He asked for just clear coat but I was worried the lime juice would eat right through normal poly so I recessed the wine box boards about a quarter inch and filled it in with food safe resin. The backsides are usable as cutting boards. One is straight oak the other is oak and cherry alternating. All of the wood was reclaimed. Sizes are 18 by 24 and 14 by 18. The 18 by 24 is HEAVY! Old Joe, dgman, RabidAlien and 10 others 13 Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted December 14, 2019 Report Share Posted December 14, 2019 What feat it's self! i'm so involved it work I had to hit the bottle to slow down and relax. Quote Link to comment Share on other sites More sharing options...
daveww1 Posted December 14, 2019 Report Share Posted December 14, 2019 great job courtym74 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted December 14, 2019 Report Share Posted December 14, 2019 What a cool idea and well executed. Now make him one, same idea using wine corks..... I made several pens using wine corks back in my pen turning days. courtym74 1 Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted December 14, 2019 Report Share Posted December 14, 2019 Very well done. How was it working with resin? courtym74 1 Quote Link to comment Share on other sites More sharing options...
courtym74 Posted December 14, 2019 Author Report Share Posted December 14, 2019 3 hours ago, Denny Knappen said: Very well done. How was it working with resin? It was a learning experience to say the least. I watched a ton of Youtube vids on it. Still screwed up the first pour and had to sand out multiple bubbles in the first one I did. I discovered that the middle board of the smaller piece (the one that says Fantesca) was extremely porous and the resin bubbled like crazy. I poured way too thick on that. Took my time and made small amounts for the second one, just barely enough to cover the surface each time. Rubbing each layer in while wearing rubber gloves until it was thick enough and hardened so that I could do a full pour without worrying about the wood sucking more of it up and creating more bubbles. All in all I'd do it again though, they were fantastic when done. The picture really doesn't do them justice. Quote Link to comment Share on other sites More sharing options...
courtym74 Posted December 14, 2019 Author Report Share Posted December 14, 2019 7 hours ago, Scrappile said: What a cool idea and well executed. Now make him one, same idea using wine corks..... I made several pens using wine corks back in my pen turning days. I think that's going to be my next resin project. He'll just have to provide the corks. That will take multiple layers of very thin coats to avoid bubbles though. Scrappile 1 Quote Link to comment Share on other sites More sharing options...
wombatie Posted December 15, 2019 Report Share Posted December 15, 2019 That is a great idea and you did an excellent job. I bet the customer was very happy with them. Marg courtym74 1 Quote Link to comment Share on other sites More sharing options...
Woodmaster1 Posted December 15, 2019 Report Share Posted December 15, 2019 Excellent idea for cutting boards! courtym74 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted December 15, 2019 Report Share Posted December 15, 2019 @courtym74 I have read somewhere that you can remove the bubbles with a heat, like going over the epoxy with a heat gun or a torch... I have not done it so, something you might try some time. courtym74 1 Quote Link to comment Share on other sites More sharing options...
shiney b Posted December 15, 2019 Report Share Posted December 15, 2019 2 hours ago, Scrappile said: @courtym74 I have read somewhere that you can remove the bubbles with a heat, like going over the epoxy with a heat gun or a torch... I have not done it so, something you might try some time. yes you can. but keep it moving! courtym74 1 Quote Link to comment Share on other sites More sharing options...
namunolie Posted December 17, 2019 Report Share Posted December 17, 2019 wine box letters I really like it they are beautiful~~ courtym74 1 Quote Link to comment Share on other sites More sharing options...
courtym74 Posted December 19, 2019 Author Report Share Posted December 19, 2019 On 12/15/2019 at 10:28 AM, Scrappile said: @courtym74 I have read somewhere that you can remove the bubbles with a heat, like going over the epoxy with a heat gun or a torch... I have not done it so, something you might try some time. On 12/15/2019 at 12:59 PM, shiney b said: yes you can. but keep it moving! I tried that and it worked great until the heat cured the top layer of resin faster than what was under it so the bubbles got stuck under the top layer. Either way I learned and it all turned out great! Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.