Popular Post Scrappile Posted December 14, 2019 Popular Post Report Share Posted December 14, 2019 I finally completed these yesterday. These are a Sheila Landry design. Easy to cut, lots of sanding and most difficult of all for me was getting them attached to the rockers. They are made of cherry and there is a very small gluing area (just at the small hooves). I use Titebond, nope, epoxy, nope, Clear Gorilla glue nope and CA glue. What finally worked was the combination of Gorilla Glue and CA glue. A second problem with the gluing there was no way to clamp them with the clamps I have. I had to dream up ways to use weights. The one with the held up leg, I had to use pins along with gluing. May have to go back and add pins to the other, they are fragile. They are around 6" long and 6" high. jollyred, namunolie, jbrowning and 18 others 20 1 Quote Link to comment Share on other sites More sharing options...
JTTHECLOCKMAN Posted December 14, 2019 Report Share Posted December 14, 2019 Sort of a intarsia and fret work 3D project. Very different. Came out great. Scrappile 1 Quote Link to comment Share on other sites More sharing options...
rjR Posted December 14, 2019 Report Share Posted December 14, 2019 Look GREAT! I use a small drill bit and make pilot holes and then use cut off toothpicks as wooden nails on some of my intricate gluing places. It mostly works. meflick, amazingkevin and Scrappile 2 1 Quote Link to comment Share on other sites More sharing options...
meflick Posted December 14, 2019 Report Share Posted December 14, 2019 Those are. beautiful Paul. I had not seen those before. Thanks for sharing. Scrappile 1 Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted December 14, 2019 Report Share Posted December 14, 2019 Great looking projects, Paul. When something is hard to clamp, I use both Titebond and CA with the accelerator. Holds instantly. Old Joe, Scrappile and amazingkevin 2 1 Quote Link to comment Share on other sites More sharing options...
Phantom Scroller Posted December 14, 2019 Report Share Posted December 14, 2019 They look great, good work. Roly Scrappile 1 Quote Link to comment Share on other sites More sharing options...
Sycamore67 Posted December 14, 2019 Report Share Posted December 14, 2019 These are excellent. Great cutting but really great sanding. They really look good. Scrappile 1 Quote Link to comment Share on other sites More sharing options...
rjweb Posted December 14, 2019 Report Share Posted December 14, 2019 They are excellent Paul, thanks for showing, RJ Scrappile 1 Quote Link to comment Share on other sites More sharing options...
alexfox Posted December 14, 2019 Report Share Posted December 14, 2019 Interesting project Scrappile 1 Quote Link to comment Share on other sites More sharing options...
dgman Posted December 15, 2019 Report Share Posted December 15, 2019 They came out great Paul! The shaping is what makes them so special! Scrappile 1 Quote Link to comment Share on other sites More sharing options...
spirithorse Posted December 15, 2019 Report Share Posted December 15, 2019 (edited) Very, very nice, Paul, You really made the deer look proud and elegant. I usually just resort to using masking tape to hold intricate pieces until the glue sets. Simple but, effective. God Bless! Spirithorse Edited December 15, 2019 by spirithorse correction, masking tape Scrappile 1 Quote Link to comment Share on other sites More sharing options...
Ron Johnson Posted December 15, 2019 Report Share Posted December 15, 2019 You did an awesome job on a delicte projet. Very well done Paul. Scrappile 1 Quote Link to comment Share on other sites More sharing options...
wombatie Posted December 15, 2019 Report Share Posted December 15, 2019 They are lovely. You certainly did an impressive job. Well done. Marg Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted December 15, 2019 Report Share Posted December 15, 2019 Rubber bands have been my go to a lot. I need more CA,gel glue with spray accelerator. That has fixed things so fast to just keep on scrolling like it never happened. I knew you could improvise with all your expertise. Super glue and backing soda makes a quick bullet proof weld Ajax can't get off, Google it! great looking crafts you hand made!!! Scrappile 1 Quote Link to comment Share on other sites More sharing options...
Foxfold Posted December 15, 2019 Report Share Posted December 15, 2019 OMG, how beautiful. Such craftsmanship. They are honestly the best decoration I have seen. I just want to 'pick them up' and touch them. Scrappile 1 Quote Link to comment Share on other sites More sharing options...
Woodrush Posted December 15, 2019 Report Share Posted December 15, 2019 I've never seen those before. They look fantastic Scrappile 1 Quote Link to comment Share on other sites More sharing options...
daveww1 Posted December 15, 2019 Report Share Posted December 15, 2019 beautiful work Scrappile 1 Quote Link to comment Share on other sites More sharing options...
GPscroller Posted December 16, 2019 Report Share Posted December 16, 2019 Beautiful little ornaments Paul, great job. Jeff Scrappile 1 Quote Link to comment Share on other sites More sharing options...
Tomanydogs Posted December 16, 2019 Report Share Posted December 16, 2019 Paul that’s so pretty. You’ve done wonderful work on these. Scrappile 1 Quote Link to comment Share on other sites More sharing options...
Charlie E Posted December 16, 2019 Report Share Posted December 16, 2019 Those are beautiful Paul. I'd hate to see what my grandkids would do to them. Scrappile 1 Quote Link to comment Share on other sites More sharing options...
namunolie Posted December 17, 2019 Report Share Posted December 17, 2019 amazing reindeer~ they are looking beatiful~~ Scrappile 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.