Popular Post woodduck Posted December 30, 2019 Popular Post Report Share Posted December 30, 2019 This one is from a pattern by H.Botas Size is 11" x 16" & was cut mainly with Silver Reverse 2/0 Blades & a 3/0 spiral blade in a few places. Made a few mistakes but think it came out ok in the end. I stack cut 2 of them and both are sold already to my very good customer & one of his workmen. Dave Monk, lawson56, Woodrush and 19 others 22 Quote Link to comment Share on other sites More sharing options...
Old Joe Posted December 30, 2019 Report Share Posted December 30, 2019 Great job! G woodduck 1 Quote Link to comment Share on other sites More sharing options...
lawson56 Posted December 30, 2019 Report Share Posted December 30, 2019 Down right Awesome!! woodduck 1 Quote Link to comment Share on other sites More sharing options...
daveww1 Posted December 30, 2019 Report Share Posted December 30, 2019 fantastic job woodduck 1 Quote Link to comment Share on other sites More sharing options...
dgman Posted December 30, 2019 Report Share Posted December 30, 2019 Great cutting Peter! I checked thoroughly and I didn’t find any mistakes! woodduck 1 Quote Link to comment Share on other sites More sharing options...
Woodrush Posted December 30, 2019 Report Share Posted December 30, 2019 That's nice woodduck 1 Quote Link to comment Share on other sites More sharing options...
flarud Posted December 30, 2019 Report Share Posted December 30, 2019 I really like that! I will look into obtaining this pattern for a future cut. woodduck 1 Quote Link to comment Share on other sites More sharing options...
OzarkSawdust Posted December 30, 2019 Report Share Posted December 30, 2019 Very Nice Peter! I was eyeballing that pattern too...but decided I needed a little more practice before I try it. Great Idea...stack cut 2-3 and sell them! What thickness did you use? woodduck 1 Quote Link to comment Share on other sites More sharing options...
woodduck Posted December 30, 2019 Author Report Share Posted December 30, 2019 5 hours ago, dgman said: Great cutting Peter! I checked thoroughly and I didn’t find any mistakes! Dan my repair jobs must have been better than I thought. Thanks Peter. Quote Link to comment Share on other sites More sharing options...
woodduck Posted December 30, 2019 Author Report Share Posted December 30, 2019 38 minutes ago, OzarkSawdust said: Very Nice Peter! I was eyeballing that pattern too...but decided I needed a little more practice before I try it. Great Idea...stack cut 2-3 and sell them! What thickness did you use? Gary I used 4mm Marine ply with a 9mm MDF backing. Thankyou. Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted December 30, 2019 Report Share Posted December 30, 2019 Extremely fine cutting on a delicate project. woodduck 1 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted December 31, 2019 Report Share Posted December 31, 2019 Mighty fine cutting on a great pattern! woodduck 1 Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted December 31, 2019 Report Share Posted December 31, 2019 a very nice cut. I always enjoy your posts, Peter, as all are so nicely done. One question for you. I see what appears to be some kind of nails in the corners, appearing to hold the front and backer boards together. Could you explain what you use for that and do you also use glue? Also what thicknesses are your two boards? Dick heppnerguy woodduck 1 Quote Link to comment Share on other sites More sharing options...
wombatie Posted December 31, 2019 Report Share Posted December 31, 2019 Fabulous cutting. I bet your customers were thrilled with them. I was just thinking of you and wondering where you where we haven't seen you. I hope you are nowhere near the fires. Stay safe. Marg woodduck 1 Quote Link to comment Share on other sites More sharing options...
woodduck Posted December 31, 2019 Author Report Share Posted December 31, 2019 16 hours ago, wombatie said: Fabulous cutting. I bet your customers were thrilled with them. I was just thinking of you and wondering where you where we haven't seen you. I hope you are nowhere near the fires. Stay safe. Marg I am fine thanks Marg ,just very busy doing other stuff. The fires are not close to us thank god & thank god for all our firefighters some who have paid the ultimate price. Cheers Peter Quote Link to comment Share on other sites More sharing options...
woodduck Posted December 31, 2019 Author Report Share Posted December 31, 2019 16 hours ago, heppnerguy said: a very nice cut. I always enjoy your posts, Peter, as all are so nicely done. One question for you. I see what appears to be some kind of nails in the corners, appearing to hold the front and backer boards together. Could you explain what you use for that and do you also use glue? Also what thicknesses are your two boards? Dick heppnerguy Yes Dick they are small round headed brass nails put there mainly for a bit of decoration & secondly if the glue ever fails they would hold it together but mainly just for show. I use 4mm Marine Ply for the cutting & 9mm MDF for the backing. Cheers Peter heppnerguy 1 Quote Link to comment Share on other sites More sharing options...
dgman Posted January 1, 2020 Report Share Posted January 1, 2020 19 hours ago, wombatie said: Fabulous cutting. I bet your customers were thrilled with them. I was just thinking of you and wondering where you where we haven't seen you. I hope you are nowhere near the fires. Stay safe. Marg How about you Marg? Are you guys ok? woodduck 1 Quote Link to comment Share on other sites More sharing options...
Hawk Posted January 1, 2020 Report Share Posted January 1, 2020 I really like the funny face in the mirror . Great job Chris woodduck 1 Quote Link to comment Share on other sites More sharing options...
wombatie Posted January 1, 2020 Report Share Posted January 1, 2020 3 hours ago, dgman said: How about you Marg? Are you guys ok? Yes Dan we are fine. We can smell smoke if the wind is in the right direction but that's all, thank goodness. Marg woodduck 1 Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted January 6, 2020 Report Share Posted January 6, 2020 Full size would be awesome!!! woodduck 1 Quote Link to comment Share on other sites More sharing options...
munzieb Posted January 6, 2020 Report Share Posted January 6, 2020 Really nicely done. Love the detail work! woodduck 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.