Mimi Posted January 4, 2020 Report Share Posted January 4, 2020 I am very excited. My daughter got me a new chair for Christmas.. Now I can scroll in comfort. new2woodwrk, wombatie, OzarkSawdust and 5 others 7 1 Quote Link to comment Share on other sites More sharing options...
new2woodwrk Posted January 4, 2020 Report Share Posted January 4, 2020 Oh yeah - stylin' for sure! Grats on the new thrown Mimi 1 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted January 4, 2020 Report Share Posted January 4, 2020 That's a many splendor thing! Just sayin'. Mimi 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted January 4, 2020 Report Share Posted January 4, 2020 Talk about style! Beautiful Pegas saw with a stylish comfy chair. Mimi and GrampaJim 2 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted January 4, 2020 Report Share Posted January 4, 2020 (edited) 59 minutes ago, Mimi said: I am very excited. My daughter got me a new chair for Christmas.. Now I can scroll in comfort. That is very similar to the one I have. There were some folks who moved out of here a couple of years ago and I scavenged it from their lot before all the junk pickers got to it. Great little chair for my EX. Still need something taller for the Hawk though. Edited January 4, 2020 by octoolguy Mimi 1 Quote Link to comment Share on other sites More sharing options...
Oscar Myer Posted January 5, 2020 Report Share Posted January 5, 2020 Nice chair Mimi!!! But you're not alone with your new acquisition I like to sit high when scrolling. I also need good lower back support. This baby has all my needs. OzarkSawdust, OCtoolguy, Wilson142 and 3 others 5 1 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted January 5, 2020 Report Share Posted January 5, 2020 I also got a new stool for Christmas... Has much more padding.. Problem now is it's too comfy and could take a nap, LOL OCtoolguy, Rockytime, Mimi and 2 others 3 2 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted January 5, 2020 Report Share Posted January 5, 2020 1 hour ago, Oscar Myer said: Nice chair Mimi!!! But you're not alone with your new acquisition I like to sit high when scrolling. I also need good lower back support. This baby has all my needs. That's a very nice chair. Can you offer up any info on it? Also, do you use a foot switch? If so, how? I have a shop stool that I have been using for my Hawk but I haven't come up with a suitable place to mount my foot switch. Any ideas? Mimi and new2woodwrk 2 Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted January 5, 2020 Report Share Posted January 5, 2020 That sure looks like a comfy chair. Mimi, new2woodwrk and OCtoolguy 3 Quote Link to comment Share on other sites More sharing options...
Wichman Posted January 5, 2020 Report Share Posted January 5, 2020 33 minutes ago, octoolguy said: That's a very nice chair. Can you offer up any info on it? Also, do you use a foot switch? If so, how? I have a shop stool that I have been using for my Hawk but I haven't come up with a suitable place to mount my foot switch. Any ideas? The setup I'm using is a hybrid; bottom of the chair is a HF chair that came with a motorcycle seat the top is a tractor seat from a chair I bought at Tractor Supply Co., the platform is 1/2" ply 2x4ft with a hole to fit the post in the chair, the hole is offset front to back to allow room for the foot switch. Maybe this will give you some ideas. new2woodwrk, Mimi and OCtoolguy 2 1 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted January 5, 2020 Report Share Posted January 5, 2020 That's clever! OCtoolguy and Mimi 2 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted January 5, 2020 Report Share Posted January 5, 2020 3 hours ago, Wichman said: The setup I'm using is a hybrid; bottom of the chair is a HF chair that came with a motorcycle seat the top is a tractor seat from a chair I bought at Tractor Supply Co., the platform is 1/2" ply 2x4ft with a hole to fit the post in the chair, the hole is offset front to back to allow room for the foot switch. Maybe this will give you some ideas. That's an excellent idea. Thank you. Mimi 1 Quote Link to comment Share on other sites More sharing options...
Oscar Myer Posted January 5, 2020 Report Share Posted January 5, 2020 17 hours ago, octoolguy said: That's a very nice chair. Can you offer up any info on it? Also, do you use a foot switch? If so, how? I have a shop stool that I have been using for my Hawk but I haven't come up with a suitable place to mount my foot switch. Any ideas? I have a DeWalt saw on the DeWalt stand. The stand lets me attach my pedal to the front crossbar with a couple of zip-ties. I drilled a hole in the bar just big enough to put the zip-tie through it. On the other end of the pedal I just zip-tied the wires going into the pedal. This setup is perfect for the height I like to be when cutting. I have no idea if this setup will work for other makes of saws but it works for me. My new stool came from Costco. My butt is extremely comfortable because it has lots of padding which is truly a blessing for when I'm sitting for more than a few hours at a time. The back curves into my lower back giving it very good support. /Oscar OCtoolguy, Jim McDonald and Mimi 1 2 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted January 5, 2020 Report Share Posted January 5, 2020 12 minutes ago, Oscar Myer said: I have a DeWalt saw on the DeWalt stand. The stand lets me attach my pedal to the front crossbar with a couple of zip-ties. I drilled a hole in the bar just big enough to put the zip-tie through it. On the other end of the pedal I just zip-tied the wires going into the pedal. This setup is perfect for the height I like to be when cutting. I have no idea if this setup will work for other makes of saws but it works for me. My new stool came from Costco. My butt is extremely comfortable because it has lots of padding which is truly a blessing for when I'm sitting for more than a few hours at a time. The back curves into my lower back giving it very good support. /Oscar Thanks for that great explanation. Pics are always helpful. By the way, I posted a long while back on how to reroute the wire coming out of the side of that foot switch so that both wires come up the same place. It really helps to keep both wires in the same orientation. I hated that wire coming out of the side. It was always getting in the way. I will have to check our Costco for the chair. Thanks again. Mimi and Oscar Myer 2 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted January 5, 2020 Report Share Posted January 5, 2020 That's how I had my foot switch on my DeWalt.. Though the way I mounted mine I didn't need to drill any holes it had molded tabs on each end where you could drill a hole to mount it.. I used the tap as a clamp so to speak and just wrapped the zip ties around the stand.. Held in place nice but every now and then it'd slip forward and I'd have to wiggle it back... I had a HF on / off foot switch for that saw and it had the wires coming out the same end.. OCtoolguy, Oscar Myer and Mimi 3 Quote Link to comment Share on other sites More sharing options...
Woodmaster1 Posted January 13, 2020 Report Share Posted January 13, 2020 Excellent ideas now I need to choose which one will work for me. Decisions are always hard. I may try a variety to see which is best. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
LarryEA Posted January 13, 2020 Report Share Posted January 13, 2020 Mimi, what I like about this place is ..." you showed a chair and now could write a book with pictures." OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.