Puzzleguy Posted January 10, 2020 Report Share Posted January 10, 2020 Help ! I need some baltic birch to make some box backs hoping for close to 1/8 or a tad thicker - in sheets - any help is appreciated - locally their is nothing near me ! OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Ctutor Posted January 10, 2020 Report Share Posted January 10, 2020 try https://ocoochhardwoods.com/plywood/ OCtoolguy and OzarkSawdust 2 Quote Link to comment Share on other sites More sharing options...
Puzzleguy Posted January 10, 2020 Author Report Share Posted January 10, 2020 Thank you ! OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
NC Scroller Posted January 10, 2020 Report Share Posted January 10, 2020 Check with your local lumber yards. Not Lowe's or Home Depot. Also look for any local kitchen remodeling contractors. They may not be a source but they might know where to get it locally. Also look at lumber in Buffalo. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
munzieb Posted January 10, 2020 Report Share Posted January 10, 2020 I have used these guys in the past with good luck. http://www.woodnshop.com/ OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
trackman Posted January 10, 2020 Report Share Posted January 10, 2020 https://www.ebay.com/itm/351972469846 I hope this link works. I have brought from this ebay store several times and always gotten good wood an service. Free shipping on 40 pieces of 12x12 BB plywood 1/8" for $50. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted January 10, 2020 Report Share Posted January 10, 2020 I buy all my wood from Ocooch Hardwoods. scrollingforsanity and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted January 10, 2020 Report Share Posted January 10, 2020 (edited) Another option is Cherokee Woods. https://www.cherokeewood.com/baltic-birch-plywood/ You can purchase it in 12" x 12" pieces or full sheets that they will cut to several sizes you can choose from. Edited January 10, 2020 by Scrappile scrollingforsanity and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
ike Posted January 10, 2020 Report Share Posted January 10, 2020 look for a hard wood dealer . I have a paxton wood which deals in hardwood and i bought a 5X5 1/8 BB ply for $17.84 including tax. That is $0.71 pe Sq. ft. IKE OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted January 10, 2020 Report Share Posted January 10, 2020 Where are you? There is a great source here on the West coast. Quote Link to comment Share on other sites More sharing options...
Puzzleguy Posted January 10, 2020 Author Report Share Posted January 10, 2020 Some great tips ! thank you one and all - your all super . would love to buy 5' x 5' sheets - would get more use of it that way -thou nothing in my neck of the woods - My guess to get 5' x 5' sheets would be very costly for handling etc -so ill rethink my sizes and do the number thing . i appreciate all the kindness and help , thank you ! OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted January 10, 2020 Report Share Posted January 10, 2020 3 hours ago, ike said: look for a hard wood dealer . I have a paxton wood which deals in hardwood and i bought a 5X5 1/8 BB ply for $17.84 including tax. That is $0.71 pe Sq. ft. IKE There is a Frank Paxton in Denver. Since it is located 45 minutes through traffic I hesitate to drive there due to old age. I can but don't like to. So before I make the trip can you tell me if they cut down the 5 foot piece? If not how do you transport it? I do not have a pickup any longer and it will not fit my Durango. I could have my wife drive but she likes to put the pedal to the metal and makes my knuckles turn white! OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Karl S Posted January 10, 2020 Report Share Posted January 10, 2020 (edited) 43 minutes ago, Rockytime said: There is a Frank Paxton in Denver. Since it is located 45 minutes through traffic I hesitate to drive there due to old age. I can but don't like to. So before I make the trip can you tell me if they cut down the 5 foot piece? If not how do you transport it? I do not have a pickup any longer and it will not fit my Durango. I could have my wife drive but she likes to put the pedal to the metal and makes my knuckles turn white! Why not call and ask ? The one in Cincinnati will make cuts for you. Edited January 10, 2020 by Karl S OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted January 10, 2020 Report Share Posted January 10, 2020 10 minutes ago, Karl S said: Why not call and ask ? The one in Cincinnati will make cuts for you. I guess my wife could call but I am so deaf I cannot use a phone. My wife usually accompanies me wherever I go to communicate for me. But thank you. You did answer my question. If they cut in Cincinnati I'm sure they do in Denver. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted January 10, 2020 Report Share Posted January 10, 2020 I have purchased from Anderson Plywood in Anaheim, Ca. and they cut it for me to put in my little Scion XB when I had it. They are a great company and the owner is a Vet with a small museum in his place of business. Anyone who actually visits there will be given the tour if they ask. http://www.aitwood.com Quote Link to comment Share on other sites More sharing options...
NC Scroller Posted January 11, 2020 Report Share Posted January 11, 2020 Puzzle do you get up to Buffalo much? Searching the web I see several lumber suppliers who would likely have it. Mosher and Advantage. My supplier is 2 hours away. I combine me trip there with other errands in that direction and I usually pick up 5 or 6 sheets. Enough to last me a year or more. BTW my wife went to SUNY Fredonia so I have been there. Nice area except for during the winter. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
ike Posted January 11, 2020 Report Share Posted January 11, 2020 Rockytime I have a paxton within 15 mkiles from my house I and I have them cut it into quarters at no charge. ddthey also have 1/2 wood useallly soft maple of popular which I always pick up a board when I go in.It's like going into a candy store. IKE OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
cowboyup3371 Posted January 11, 2020 Report Share Posted January 11, 2020 (edited) CR Lumber here outside of Xenia OH ships all over the place and has some great quality wood/prices. Check out http://crlumber.com - the price list he has there is up to date as well - Edited January 11, 2020 by cowboyup3371 Correcting Link OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Woodmaster1 Posted January 11, 2020 Report Share Posted January 11, 2020 (edited) I get mine from lljohnsons Workbench in Charlotte MI. I could go to South Bend IN same distance either way but a nicer drive to Charlotte. The Baltic Birch is: 1/8" $9.11, 1/4" $15.95 and they cut the 5x5 plywood down for me. It is a 90 mile drive either way. So when I go my list is long because I get band saw blades, stain, finish exotic wood, and domestic hardwood. Edited January 11, 2020 by Woodmaster1 OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Puzzleguy Posted January 13, 2020 Author Report Share Posted January 13, 2020 On 1/11/2020 at 7:53 AM, NC Scroller said: Puzzle do you get up to Buffalo much? Searching the web I see several lumber suppliers who would likely have it. Mosher and Advantage. My supplier is 2 hours away. I combine me trip there with other errands in that direction and I usually pick up 5 or 6 sheets. Enough to last me a year or more. BTW my wife went to SUNY Fredonia so I have been there. Nice area except for during the winter. Thanks for the tip ! appreciate very much - I see it on places like Amazon , but im not sure about which direction the grain is on various odd sizes , and if i could buy it in 5' x 5' sheets Their would be little waste - probably use 1/2 as much - plus I may need some for displays - been using a light colored mahogany lu-anne, but recently been only able to find the darker underlay stuff ( not as nice ) By the way thanks for the nice things you said about Fredonia - were so close to Lake Erie that we dont get as much snow as some people - but the winds here can be something else - our college is outstanding , they have world class music performers their all the time sometimes for free ! OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.