Popular Post Scrappile Posted January 20, 2020 Popular Post Report Share Posted January 20, 2020 (edited) I am making a box to gift to my neighbor. Got started on the scrolling this afternoon after cutting and gluing wood for it yesterday. Her box is going to be 3/16" Maple, then I have a 1/4" BB under it so I have more control and it the BB turns out okay, I will have a second box. I plan on lining the box with a dark wood. This is a pattern from Findscrollsaw.com. It is called the "Modena Jewel Box". Pedro, the owner of the site is in Spain. He is a great gentleman to work with. He is recently back after being offline for around 3 months, with an illness and 2 months in hospital... I am so happy he is back that I have purchased 6 of his patterns lately, and have a few more I want,,,, just in case. I plan on doing mostly this type of scrolling this year. Anyway, it is not much accomplished, but I am a very slow scroller and not really in a hurry. When I hurry I make mistakes. This is the lid to the box. Edited January 29, 2020 by Scrappile stoney, don watson, Wilson142 and 21 others 23 1 Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted January 20, 2020 Report Share Posted January 20, 2020 Looking good, my friend. Every since we got back from Oregon, we have had non stop company and as a result, no shop time. Can't wait to get back out there, as there are a lot of patterns, I want to get at. Dick heppnerguy Scrappile and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
Gonzo Posted January 20, 2020 Report Share Posted January 20, 2020 Nice project. And I like your story. Scrappile and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
Heli_av8tor Posted January 20, 2020 Report Share Posted January 20, 2020 Lots of fine cuts that will show any mistakes. Great work so far. Tom OCtoolguy, Scrappile and don watson 2 1 Quote Link to comment Share on other sites More sharing options...
Ron Johnson Posted January 20, 2020 Report Share Posted January 20, 2020 That's going to be a beautiful box when completed Paul. It's always best to take your time with that amount of detail. When done you'll be glad you had. Looking great so far. don watson, OCtoolguy and Scrappile 2 1 Quote Link to comment Share on other sites More sharing options...
dgman Posted January 20, 2020 Report Share Posted January 20, 2020 It’s looking great so far Paul! Of all the different types of scrolling, fret work like this is my favorite. Looking forward to your progress. Scrappile, OCtoolguy and Oscar Myer 2 1 Quote Link to comment Share on other sites More sharing options...
Foxfold Posted January 20, 2020 Report Share Posted January 20, 2020 Wow, such detail ... You are an amazing scroller Paul and I look forward to seeing 'progress' pictures as you work with this piece. OCtoolguy, Scrappile and Oscar Myer 2 1 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted January 20, 2020 Report Share Posted January 20, 2020 That's going to be one nice box Paul... My favorite scrolling is the detailed portrait type scenes... Sadly they just aren't something that sells very well.. so I don't do a lot of it.. OCtoolguy and Scrappile 1 1 Quote Link to comment Share on other sites More sharing options...
daveww1 Posted January 20, 2020 Report Share Posted January 20, 2020 looking forward to seeing the finished project OCtoolguy and Scrappile 1 1 Quote Link to comment Share on other sites More sharing options...
Scrolling Steve Posted January 20, 2020 Report Share Posted January 20, 2020 Looking good Paul....Keep us posted on your progress ! Scrappile and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
Rolf Posted January 20, 2020 Report Share Posted January 20, 2020 (edited) Very nice design and cutting. What blades are you using? What are the dimensions? Edited January 20, 2020 by Rolf Scrappile and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
Oscar Myer Posted January 20, 2020 Report Share Posted January 20, 2020 Wow... great stuff so far!!! I have found that I love doing fretwork as well. Please do keep posting progress updates. OCtoolguy and Scrappile 1 1 Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted January 20, 2020 Report Share Posted January 20, 2020 Looks good Paul. That is quite a challenge OCtoolguy and Scrappile 1 1 Quote Link to comment Share on other sites More sharing options...
rjweb Posted January 20, 2020 Report Share Posted January 20, 2020 It’s going to be a work of art, RJ Scrappile and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted January 20, 2020 Author Report Share Posted January 20, 2020 (edited) 2 hours ago, Rolf said: Very nice design and cutting. What blades are you using? What are the dimensions? I am using a Pegas Reverse Skip #3 and where needed a Pegas #2/0 Spiral The box will be 11" X 11" X 3.25" This is what I hope it looks like when I get done, only mine will be Maple. Edited January 20, 2020 by Scrappile meflick, Dave Monk, OCtoolguy and 2 others 4 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted January 20, 2020 Report Share Posted January 20, 2020 3 hours ago, Scrappile said: I am using a Pegas Reverse Skip #3 and where needed a Pegas #2/0 Spiral The box will be 11" X 11" X 3.25" This is what I hope it looks like when I get done, only mine will be Maple. That is an amazingly difficult project Paul and you are doing a masterful job on it. I hope to someday acquire the skill it takes to do this type of work. You are the MAN! Oscar Myer 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted January 20, 2020 Author Report Share Posted January 20, 2020 Same skill it takes to do any scrolling. Patients and persistence. Same types of cuts, just more of them in one project. Oscar Myer, don watson, Jim Finn and 1 other 2 2 Quote Link to comment Share on other sites More sharing options...
new2woodwrk Posted January 20, 2020 Report Share Posted January 20, 2020 That's one impressive project! I'm sure it's going to be incredible when you're done! Thanks for sharing Scrappile, Oscar Myer and OCtoolguy 2 1 Quote Link to comment Share on other sites More sharing options...
scrollingforsanity Posted January 20, 2020 Report Share Posted January 20, 2020 Great job Paul. I would like to come over and see it before you give it away maybe. Scrappile and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted January 21, 2020 Author Report Share Posted January 21, 2020 (edited) Really did not intend this to be a progress thread, but thought I would post that I did make some progress today. This is eating the blades, but I expected that. I have used 6 blades so far. I want to keep going, but the back hurt and eyes are tired. If I don't quit, I will be sorry. Edited January 21, 2020 by Scrappile Dave Monk, RabidAlien, OCtoolguy and 3 others 5 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted January 21, 2020 Report Share Posted January 21, 2020 Really nice Paul. Quote Link to comment Share on other sites More sharing options...
scrollingforsanity Posted January 21, 2020 Report Share Posted January 21, 2020 You made quite a bit of progress today. Much better to have a nice sharp blade than try to run one to long and mess something up. OCtoolguy and Oscar Myer 2 Quote Link to comment Share on other sites More sharing options...
rjweb Posted January 21, 2020 Report Share Posted January 21, 2020 This is exciting, thx for sharing, RJ Scrappile 1 Quote Link to comment Share on other sites More sharing options...
Puzzleguy Posted January 21, 2020 Report Share Posted January 21, 2020 Absolutely amazing -you are doing a great job ! Scrappile 1 Quote Link to comment Share on other sites More sharing options...
WayneMahler Posted January 21, 2020 Report Share Posted January 21, 2020 Looks like your making progress Paul. I really enjoy this type of cutting. Keep up the great work and posting photos of your progress. Oscar Myer and Scrappile 1 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.