JTTHECLOCKMAN Posted February 14, 2020 Report Share Posted February 14, 2020 4 hours ago, Scrappile said: I don't have a DeWalt but watched that.. Good video and makes even non- DeWalt owners a little more familiar with these types of saws. Excalibur, Seyco, King, etc., are similar configuration. That is true. Did not think of that. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted February 14, 2020 Report Share Posted February 14, 2020 Actually having taken both saws apart.. I'll say that the Excalibur is about 2 times easier to take apart and put back together than the DW788's at least I thought so anyway.. lol.. yes the mechanism is really similar but they are different parts and different bearings / sleeves.. etc.. I do believe the front rocker assemblies may be the same.. but that's about it.. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
ike Posted February 14, 2020 Report Share Posted February 14, 2020 If your budget allows $300 I would go for the Delta 40-694 I bought one 2 years ago and I have hadd zero probllems with it i bought it from Lowes and at a 6 month same as cash. No intrest You are useing there money. IKE OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
JTTHECLOCKMAN Posted February 15, 2020 Report Share Posted February 15, 2020 3 hours ago, ike said: If your budget allows $300 I would go for the Delta 40-694 I bought one 2 years ago and I have hadd zero probllems with it i bought it from Lowes and at a 6 month same as cash. No intrest You are useing there money. IKE IKE I do not want to be the downer here but you need to read the entire thread or just keep up. He bought the saw already and this a done deal so we need to encourage him. The last question was about maintenance on the Dewalt. That is where the discussion on weather to take apart and how easy. The Dewalt is a good saw for sure. Needs attention at times. Wilson142, Oscar Myer and OCtoolguy 2 1 Quote Link to comment Share on other sites More sharing options...
Fedido Posted February 21, 2020 Author Report Share Posted February 21, 2020 Just thought I would wrap this thread up some with an update of the scroll saw. While a few of you guys had me concerned of my purchase, I have been scrolling for a few weeks now and able to say I absolutely love the saw. Quiet, easy to use and a total joy. Thank you all for all the comments. Hendo OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
JTTHECLOCKMAN Posted February 21, 2020 Report Share Posted February 21, 2020 1 hour ago, Fedido said: Just thought I would wrap this thread up some with an update of the scroll saw. While a few of you guys had me concerned of my purchase, I have been scrolling for a few weeks now and able to say I absolutely love the saw. Quiet, easy to use and a total joy. Thank you all for all the comments. Hendo Good to hear and it is a good saw. Hope you get many years of pleasure from it. Happy Scrolling. OCtoolguy and Fedido 2 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted February 21, 2020 Report Share Posted February 21, 2020 Thanks for the update. I'm glad your purchase came out good. Sometimes things DO go your way. There was a lot of great info on this thread and I'm glad that nothing scared you off from your purchase. That saw is a great saw as JT stated and with the proper maintenance, it will serve you well. Happy scrolling. Now, post some pics of your work. Quote Link to comment Share on other sites More sharing options...
Fedido Posted February 21, 2020 Author Report Share Posted February 21, 2020 OC, Thanks. Funny story. It stopped working today. Because of this thread, troubleshot, acquired a fuse and replaced it within 20 minutes. Just for you, some of the work. OCtoolguy and Oscar Myer 1 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted February 22, 2020 Report Share Posted February 22, 2020 1 hour ago, Fedido said: OC, Thanks. Funny story. It stopped working today. Because of this thread, troubleshot, acquired a fuse and replaced it within 20 minutes. Just for you, some of the work. Well, if it blew a fuse, there may be a good reason. At your leisure, start cleaning and checking things out. You have all the knowledge. Quote Link to comment Share on other sites More sharing options...
Fedido Posted February 22, 2020 Author Report Share Posted February 22, 2020 Thanks OC, I am extremely confident that I was cutting hardwood in a turn and had the speed too low. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted February 22, 2020 Report Share Posted February 22, 2020 6 hours ago, Fedido said: Thanks OC, I am extremely confident that I was cutting hardwood in a turn and had the speed too low. What blade? I did that all the time with my Dewalt. Never blew a fuse. If your saw is having to work because of drag in the bearings, the added stress of the tight turn in thick hardwood might have put too much strain on the motor and caused the overload. Just surmising. Quote Link to comment Share on other sites More sharing options...
Fedido Posted February 22, 2020 Author Report Share Posted February 22, 2020 OC, that is the same train of thought I have had. Used it today for about an hour and a half with no problems. If it continues to work, then I will call it an anomaly. If it blows another fuse, then yes, there is an underlying problem. Hendo OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Fedido Posted February 23, 2020 Author Report Share Posted February 23, 2020 @octoolguy, just because I believe in being through and sharing my experiences (most of the time for pure comical value), I ran the saw again last night through its paces and had no problems. Therefore I am concluding that the fuse blowing is placed squarely on operator error. Now if I could just fine a good operator. kmmcrafts and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted February 23, 2020 Report Share Posted February 23, 2020 4 hours ago, Fedido said: @octoolguy, just because I believe in being through and sharing my experiences (most of the time for pure comical value), I ran the saw again last night through its paces and had no problems. Therefore I am concluding that the fuse blowing is placed squarely on operator error. Now if I could just fine a good operator. Many times it comes down to that. Have fun, enjoy your new saw and let the chips (sawdust) fall where they may. Oscar Myer and Fedido 2 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.