Popular Post RabidAlien Posted February 11, 2020 Popular Post Report Posted February 11, 2020 (edited) Another little jewelry box, I took some of the features of his Heart box and the pattern of the Yin Yang box and made....a YinYang box. Wood was scrap 1/2" ply, glued four high and cut (made for a VERY tough cut, went through FDUR #7's like crazy). Top/bottom and bottom of drawer are 3/8 ply. Stained with Minwax Ebony and Ipswitch Pine. Dowel is 1/4". For the top, I put one of the "drawers" on the circle, traced the curves with a pencil, then just used a fine paintbrush to put the stain on. Either the lead, or the faint indention left by the pencil kept most of the stain from bleeding over, although there was a bit. Overall, I'm happy with the results. Edited February 11, 2020 by RabidAlien Dave Monk, barb.j.enders, Loskoppie and 9 others 12 Quote
Rockytime Posted February 11, 2020 Report Posted February 11, 2020 Great looking box. Nice work! RabidAlien 1 Quote
lawson56 Posted February 11, 2020 Report Posted February 11, 2020 Now that is So Cool!! RabidAlien 1 Quote
Scrolling Steve Posted February 11, 2020 Report Posted February 11, 2020 That turned out great ! RabidAlien 1 Quote
amazingkevin Posted February 11, 2020 Report Posted February 11, 2020 I like it a lot!!!!!!!!!!!!!!!!!!! RabidAlien 1 Quote
wombatie Posted February 12, 2020 Report Posted February 12, 2020 That's a pretty niffty jewelry box. Well done. Marg RabidAlien 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.