MarylandScroller Posted February 17, 2020 Report Share Posted February 17, 2020 I have an Excalibur EX-19 which I purchased used 13 years ago. I updated it with the improved clamps (purchased from Seyco). The saw works well. I would like to sell the saw, but haven't seen any of the EX-19's for sale for quite some time, so I am not sure what the saw is worth. Is there still a market for this saw? It is one of the early ones, built by Sommerville in Canada in 1993. I recall a thread a few years ago in this forum where a was a used EX-19 being sold for $500 and the consensus was that this was way overpriced because parts are no longer available for the EX-19. I am just trying to figure out what a fair price would be for this machine. These machines might be old but are built like tanks and work very well. Alan OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted February 17, 2020 Report Share Posted February 17, 2020 3 hours ago, MarylandScroller said: I have an Excalibur EX-19 which I purchased used 13 years ago. I updated it with the improved clamps (purchased from Seyco). The saw works well. I would like to sell the saw, but haven't seen any of the EX-19's for sale for quite some time, so I am not sure what the saw is worth. Is there still a market for this saw? It is one of the early ones, built by Sommerville in Canada in 1993. I recall a thread a few years ago in this forum where a was a used EX-19 being sold for $500 and the consensus was that this was way overpriced because parts are no longer available for the EX-19. I am just trying to figure out what a fair price would be for this machine. These machines might be old but are built like tanks and work very well. Hi Alan, I hope this is of some value. I have been watching with no actual interest, a couple of old EX 19's on C/L and Facebook marketplace. Both have been offered for $400 and have been listed for a long time. Meaning more than a month. Actually more like 3 months. No action. I think anybody who knows about Excalibur saws probably already have some knowledge of the early saws and that parts are not available in most cases. So, if you really want to sell your saw quickly, I'd have to say put your price at less than $200. I'd be very surprised if you get $100 for it. Sorry. Sometimes you just have to go the "donation" route and write it off. scrollingforsanity 1 Quote Link to comment Share on other sites More sharing options...
MarylandScroller Posted February 17, 2020 Author Report Share Posted February 17, 2020 Thanks for your perspective, Ray! I paid a few hundred for the saw, and then paid $150 for the upgraded Excalibur blade clamps. Sounds like I would be lucky to recover the cost of the clamps. Oh well, things are only worth what somebody is willing to pay for them. Alan Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted February 17, 2020 Report Share Posted February 17, 2020 1 hour ago, MarylandScroller said: Thanks for your perspective, Ray! I paid a few hundred for the saw, and then paid $150 for the upgraded Excalibur blade clamps. Sounds like I would be lucky to recover the cost of the clamps. Oh well, things are only worth what somebody is willing to pay for them. May I ask why you want to sell it? Are you giving up the hobby or buying a newer saw or ????? Just curious. If time is on your side, put it up for sale on the two spots I mentioned and sit back and wait. Be sure to post lots of pics and a good description of the saw. Pictures are what sells stuff. I've bought and sold a ton of stuff on C/L with great success. Pricing is the key. Start high enough so that you can come down but not too high to scare prospective buyers off. Figure out in your mind what would make you happy and go from there. It sounds like a great saw. Just old, like me. Alan Another thing you might think about is if you can't sell or it or don't want to mess with it, donate it to either a school or a local Boys/Girls club or a scroll saw group. scrollingforsanity 1 Quote Link to comment Share on other sites More sharing options...
MarylandScroller Posted February 17, 2020 Author Report Share Posted February 17, 2020 8 minutes ago, octoolguy said: May I ask why you want to sell it? Are you giving up the hobby or buying a newer saw or ????? Just curious. If time is on your side, put it up for sale on the two spots I mentioned and sit back and wait. Be sure to post lots of pics and a good description of the saw. Pictures are what sells stuff. I've bought and sold a ton of stuff on C/L with great success. Pricing is the key. Start high enough so that you can come down but not too high to scare prospective buyers off. Figure out in your mind what would make you happy and go from there. It sounds like a great saw. Just old, like me. Another thing you might think about is if you can't sell or it or don't want to mess with it, donate it to either a school or a local Boys/Girls club or a scroll saw group. I am selling the saw because I would like to replace it with a Pegas 16" scroll saw. Its a bit smaller (I no longer have a dedicated shop) and has a few features that my Excalibur doesn't. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted February 17, 2020 Report Share Posted February 17, 2020 3 minutes ago, MarylandScroller said: I am selling the saw because I would like to replace it with a Pegas 16" scroll saw. Its a bit smaller (I no longer have a dedicated shop) and has a few features that my Excalibur doesn't. You mean a Pegas 21" saw? Pegas only offers a 21" saw.. OCtoolguy and scrollingforsanity 1 1 Quote Link to comment Share on other sites More sharing options...
MarylandScroller Posted February 17, 2020 Author Report Share Posted February 17, 2020 14 minutes ago, kmmcrafts said: You mean a Pegas 21" saw? Pegas only offers a 21" saw.. It is true that Pegas doesn't offer a 16" saw in the US currently. They do have a 16" model, the SCP16CE which they sell in many countries. Bob Duncan, the Pegas (Grobet USA) National Sales Manager, indicated that they are trying to get the rights to sell this saw in the US, so I am hopeful. OCtoolguy and kmmcrafts 1 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted February 17, 2020 Report Share Posted February 17, 2020 Does a 21" really take up that much more space? scrollingforsanity and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted February 17, 2020 Report Share Posted February 17, 2020 If you get the stand too.. the footprint will be the same.. as they use the same stand for the 16 & 21" saws... At least the Excalibur version does scrollingforsanity and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
MarylandScroller Posted February 18, 2020 Author Report Share Posted February 18, 2020 If the 21" and 16" saws share the same stand, I guess the footprint would be the same, although the 21" would be 5" deeper. My 19" saw seems somewhat "bulky" because the motor is separate and is located behind the saw, unlike the current designs, and the stand is not meant for the saw. I sometimes need to share my 1-car garage with a car, so space is at a premium. -Alan kmmcrafts 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted February 18, 2020 Report Share Posted February 18, 2020 You don't have that big motor handing off the back of the newer saws. A 21' with stand I think would take up no more, probably less room than that beauty... OCtoolguy, MarylandScroller and scrollingforsanity 3 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted February 18, 2020 Report Share Posted February 18, 2020 2 hours ago, MarylandScroller said: If the 21" and 16" saws share the same stand, I guess the footprint would be the same, although the 21" would be 5" deeper. My 19" saw seems somewhat "bulky" because the motor is separate and is located behind the saw, unlike the current designs, and the stand is not meant for the saw. I sometimes need to share my 1-car garage with a car, so space is at a premium. -Alan I'd build a new stand for your saw and relocate the motor under the saw. Scrappile, kmmcrafts, MarylandScroller and 1 other 4 Quote Link to comment Share on other sites More sharing options...
JimErn Posted February 18, 2020 Report Share Posted February 18, 2020 Interesting pic of the excaliber, looks like the head does not tilt, looks like the table tilts. If that is the case anyone know what year the ex came out with the tilting head? scrollingforsanity and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
MarylandScroller Posted February 18, 2020 Author Report Share Posted February 18, 2020 3 hours ago, JimErn said: Interesting pic of the excaliber, looks like the head does not tilt, looks like the table tilts. If that is the case anyone know what year the ex came out with the tilting head? The EX-19 does have the tilting table. I am not sure when the EX-21, with the tilting table, came out. I do see references to an EX-19VS. Not sure what the difference is between the VS and the regular EX-19 (variable speed?). Mine has variable speed but you need to move a belt to different pulleys to change the speed. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted February 18, 2020 Report Share Posted February 18, 2020 6 minutes ago, MarylandScroller said: The EX-19 does have the tilting table. I am not sure when the EX-21, with the tilting table, came out. I do see references to an EX-19VS. Not sure what the difference is between the VS and the regular EX-19 (variable speed?). Mine has variable speed but you need to move a belt to different pulleys to change the speed. I believe VS is variable speed... Your saw isn't a "variable" speed. It's a 3-4-5 or whatever many pulley - speed options it has.. variable would be the whole range of speeds.. I may be wrong but I don't think the tilting head came out until the current style saw design was made with the motor mounted to the saw body.. which I think was around 2003 ish scrollingforsanity and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
MarylandScroller Posted February 18, 2020 Author Report Share Posted February 18, 2020 5 minutes ago, kmmcrafts said: I believe VS is variable speed... Your saw isn't a "variable" speed. It's a 3-4-5 or whatever many pulley - speed options it has.. variable would be the whole range of speeds.. I may be wrong but I don't think the tilting head came out until the current style saw design was made with the motor mounted to the saw body.. which I think was around 2003 ish I wonder if the tilting head design came about when they moved the manufacturing from Canada to Taiwan. Today's 21 inch saw looks essentially like the original EX-21. Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted February 19, 2020 Report Share Posted February 19, 2020 8 hours ago, MarylandScroller said: I wonder if the tilting head design came about when they moved the manufacturing from Canada to Taiwan. Today's 21 inch saw looks essentially like the original EX-21. My Ex21 was made in Canada in 2010 and it has the tilting head. So does my Ex16 but it came from Taiwan. scrollingforsanity and MarylandScroller 2 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted February 19, 2020 Report Share Posted February 19, 2020 Just for your information, this one has been on C/L for a long time. https://sandiego.craigslist.org/csd/tls/d/san-diego-scroll-saw-heavy-duty/7076926500.html Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted February 19, 2020 Report Share Posted February 19, 2020 And then there is this one. Also been on for a while now. https://santabarbara.craigslist.org/tls/d/buellton-excalibur-19-variable-speed/7053725234.html Quote Link to comment Share on other sites More sharing options...
MarylandScroller Posted February 20, 2020 Author Report Share Posted February 20, 2020 (edited) 2 hours ago, octoolguy said: Just for your information, this one has been on C/L for a long time. https://sandiego.craigslist.org/csd/tls/d/san-diego-scroll-saw-heavy-duty/7076926500.html The one in San Diego for $125 appears to be the same model as my saw. The EX-19VS saw in Santa Barbara is similar but has the variable speed. $400 seems quite high for that saw. Thanks for sharing. Edited February 20, 2020 by MarylandScroller OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted February 20, 2020 Report Share Posted February 20, 2020 4 minutes ago, MarylandScroller said: The one in San Diego for $125 appears to be the same model as my saw. The EX-19VS saw in Santa Barbara is similar but has the variable speed. $400 seems quite high for that saw. Thanks for sharing. Yes, it is. I just bought my EX16 in like new condition in Santa Barbara for $200. I paid $250 for my EX21. Both steals. Quote Link to comment Share on other sites More sharing options...
MarylandScroller Posted February 20, 2020 Author Report Share Posted February 20, 2020 On 2/17/2020 at 10:57 AM, MarylandScroller said: I have an Excalibur EX-19 which I purchased used 13 years ago. I updated it with the improved clamps (purchased from Seyco). The saw works well. I would like to sell the saw, but haven't seen any of the EX-19's for sale for quite some time, so I am not sure what the saw is worth. Is there still a market for this saw? It is one of the early ones, built by Sommerville in Canada in 1993. I recall a thread a few years ago in this forum where a was a used EX-19 being sold for $500 and the consensus was that this was way overpriced because parts are no longer available for the EX-19. I am just trying to figure out what a fair price would be for this machine. These machines might be old but are built like tanks and work very well. Alan Actually, it turns out that my saw isn't an EX-19. It is an EX-11, which apparently is an earlier version of the EX-19. It has a 3-position pulley for speed changes. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted February 20, 2020 Report Share Posted February 20, 2020 1 hour ago, MarylandScroller said: Actually, it turns out that my saw isn't an EX-19. It is an EX-11, which apparently is an earlier version of the EX-19. It has a 3-position pulley for speed changes. It sounds like a "collectible" and should be put up on a shelf as a conversation piece. MarylandScroller 1 Quote Link to comment Share on other sites More sharing options...
MarylandScroller Posted February 20, 2020 Author Report Share Posted February 20, 2020 14 hours ago, octoolguy said: It sounds like a "collectible" and should be put up on a shelf as a conversation piece. I would do that but apparently the shelf would cost more to build than the saw is worth OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted February 20, 2020 Report Share Posted February 20, 2020 25 minutes ago, MarylandScroller said: I would do that but apparently the shelf would cost more to build than the saw is worth The shelf could be your first project on your new Pegas saw. Or at least the decorative portion of it. If that saw still is functional, it still has value. You just have to find the right situation for it. Somebody could use it I'm sure. MarylandScroller 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.