kmmcrafts Posted February 28, 2020 Report Share Posted February 28, 2020 I just run across this on one of the FB groups.. Also note about formaldehyde at the bottom I thought was interesting as that had been a hot topic over the years.. https://wolstenholme.com/plywood-products/baltic-birch/?fbclid=IwAR3KaFoa7EmI6IHba5UbtRJHV2KQbfQZBZYYlYEJSXF5sb2s62i5B3Gb2ps scrollingforsanity, jollyred and OCtoolguy 1 2 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted February 28, 2020 Report Share Posted February 28, 2020 Sounds like these guys deal in large bulk orders. Wish they would sell to Home Depot! stoney, kmmcrafts and OCtoolguy 1 2 Quote Link to comment Share on other sites More sharing options...
Dave Monk Posted February 28, 2020 Report Share Posted February 28, 2020 I would love to be able to get 4x8 bb .........5x5 sheets are a pain to handle. stoney 1 Quote Link to comment Share on other sites More sharing options...
Woodmaster1 Posted February 28, 2020 Report Share Posted February 28, 2020 (edited) I buy it in 5x5 sheets and they cut it down for me into a 3' wide and 2' wide sheets. They have 4x8 sheets but the thinnest it comes is 1/2" and the cost per square foot is more expensive. I will stick with the 5x5 sheets. Edited February 28, 2020 by Woodmaster1 stoney 1 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted February 28, 2020 Author Report Share Posted February 28, 2020 26 minutes ago, Woodmaster1 said: I buy it in 5x5 sheets and they cut it down for me into a 3' wide and 2' wide sheets. They have 4x8 sheets but the thinnest it comes is 1/2" and the cost per square foot is more expensive. I will stick with the 5x5 sheets. It wouldn't matter to me what size it is as long as the price is good.. I'm not willing to pay more for a different size.. I also have them cut it down for me.. I usually just have them cut into 3rds. approx. 20"slices so it's easier on my small cheap table saw to cut them down to size.. It's nice that they cut them for free ( for the first 10 minutes of cutting ). I'm a level 4 buyer so I get the 1/8" for $11 and $15 for the 1/4".. I use mostly the 1/8... The larger 4 x 8 sheets I also have them cut down so as I said... don't matter to me what size sheets they are.. I'm just looking at the price anyway.. They know me so well yet they make sure to tell me every time that they charge after 10 minutes of cutting.. funny cause the guy inside tells me this... then the guy outside also tells me this when I get out there.. even if there is only 1 cut, LOL Quote Link to comment Share on other sites More sharing options...
new2woodwrk Posted February 28, 2020 Report Share Posted February 28, 2020 Where are you all getting 5x5 sheets? Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted February 28, 2020 Author Report Share Posted February 28, 2020 I get mine at a local lumber store called LLJohnson WorkBench.. They only have two stores one here in MI and one in IN. I'm pretty sure WoodMaster gets his at the same place as I do.. I know he has mentioned it before to me.. I also usually buy large quantity during their annual Wood Expo event that is held usually first part of Sept. and they have big discounts on tools and lumber etc.. pretty big event for such a small town and place with a lot of demos going on etc.. There is a site somewhere that shows dealers for lumber yards and I think sawmills that you can search all over the USA to find suppliers.. I can't think of the site now.. I imagine google would also be a good one.. This sight was mentioned to me many years ago.. but these days with smart phones.. I bet you could ask your phone to do a search for local suppliers.. new2woodwrk 1 Quote Link to comment Share on other sites More sharing options...
crupiea Posted February 29, 2020 Report Share Posted February 29, 2020 I just stick with the 5 x 5 and have them cut it in half. Easier to deal with that way. I like mine with the russian writing on it. Quote Link to comment Share on other sites More sharing options...
Old Joe Posted March 3, 2020 Report Share Posted March 3, 2020 I get 5x5 sheets from a local shop called Exotic Lumber in Frederick, MD. I usually get them to cut it in half. I have not seen Baltic Birch in 4x8 sheets that are the B/BB rated. Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.