DWSUDEKUM Posted March 3, 2011 Report Share Posted March 3, 2011 Here is my new bowl with a few work in progress pictures and the finished bowl. As you can see in the picture above I used 3/4 in Poplar Plywood and 3/16 Clear Pine and cut strips that were 7/8 wide and 9 in. long. Â I decided that the blank was incomplete so I marked halfway on each side and connected the marks. Â I cut the corners off and added a 1/4 inch thick padauk strip on each side. Â I decided on a simple round bowl cut at 29 degrees left side down. DW I have reposted the pictures using an alternative hosting for the images as aparently ImageShack still is infected. Sorry about that Quote Link to comment Share on other sites More sharing options...
mikesscrollsaw Posted March 4, 2011 Report Share Posted March 4, 2011 Very nice bowl! Thanks for showing the build pics with it. Quote Link to comment Share on other sites More sharing options...
jboyd Posted March 4, 2011 Report Share Posted March 4, 2011 Your bowls are amazing!! A couple steps above my own skill level. Well maybe more than a couple!!! Quote Link to comment Share on other sites More sharing options...
joesawdust Posted March 4, 2011 Report Share Posted March 4, 2011 That's a fantastic bowl Quote Link to comment Share on other sites More sharing options...
wombatie Posted March 4, 2011 Report Share Posted March 4, 2011 I love it, another GREAT bowl. Marg Quote Link to comment Share on other sites More sharing options...
Clayton717 Posted March 5, 2011 Report Share Posted March 5, 2011 very cool DW. Quote Link to comment Share on other sites More sharing options...
Messman Posted March 5, 2011 Report Share Posted March 5, 2011 great work Quote Link to comment Share on other sites More sharing options...
Oges Posted March 9, 2011 Report Share Posted March 9, 2011 Very nice DW, bowl turned out great. Thanks for the steps on making the bowl, may just have to add this to my 'To Do' list Quote Link to comment Share on other sites More sharing options...
realfEZ Posted March 9, 2011 Report Share Posted March 9, 2011 Fantastic! thanks for sharing... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.