cashew Posted April 1, 2020 Report Share Posted April 1, 2020 (edited) I finished one order and was hesitating on the next so I tried something else that scares me but is my own so I can screw it up without a problem. These are 13 hours into it -- unfortunately I have to start the next one so am shelving this for now -- maybe (or I could just be insane for trying this but it's working) 3/8 Baltic with a #1 modified geometry on a Pegas Edited April 1, 2020 by cashew Scrappile, OCtoolguy, Dave Monk and 6 others 8 1 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted April 1, 2020 Report Share Posted April 1, 2020 I agree with you, you must be nuts. But, you are doing beautiful work. I would not have the patience. cashew, scrollingforsanity and OCtoolguy 3 Quote Link to comment Share on other sites More sharing options...
Ron Johnson Posted April 1, 2020 Report Share Posted April 1, 2020 Patience is a virtue which you must have a lot of. Going to be beautiful when done Bill. scrollingforsanity, cashew and OCtoolguy 3 Quote Link to comment Share on other sites More sharing options...
Badgerboy Posted April 1, 2020 Report Share Posted April 1, 2020 Rocky is right, you’re nuts but may I join you? Where did you get the pattern? OCtoolguy, cashew and scrollingforsanity 3 Quote Link to comment Share on other sites More sharing options...
cashew Posted April 1, 2020 Author Report Share Posted April 1, 2020 @Badgerboy The pattern came from an on line search for circle mandala's scrollingforsanity and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
cashew Posted April 1, 2020 Author Report Share Posted April 1, 2020 OK now it's beginning to scare me a bit to change blades when dull -- 16 hours in Scrappile, scrollingforsanity, OCtoolguy and 1 other 3 1 Quote Link to comment Share on other sites More sharing options...
rjweb Posted April 1, 2020 Report Share Posted April 1, 2020 Looks beatiful keep us posted, RJ OCtoolguy and cashew 2 Quote Link to comment Share on other sites More sharing options...
dgman Posted April 2, 2020 Report Share Posted April 2, 2020 Do you have a headache yet? cashew and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
LarryEA Posted April 2, 2020 Report Share Posted April 2, 2020 (edited) Tedious....got to have great cutting blade all the time... and excellent inside the line cutting... Edited April 2, 2020 by LarryEA add cashew and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
Jim McDonald Posted April 2, 2020 Report Share Posted April 2, 2020 That's going to be a masterpiece. (If it doesn't drive you crazy first) cashew and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
cashew Posted April 2, 2020 Author Report Share Posted April 2, 2020 3 hours ago, LarryEA said: Tedious....got to have great cutting blade all the time... and excellent inside the line cutting... When the blade gets dull I'm afraid to change atm -- need super control till the edge dulls a bit -- then its easier OCtoolguy and amazingkevin 2 Quote Link to comment Share on other sites More sharing options...
wombatie Posted April 2, 2020 Report Share Posted April 2, 2020 Looking good so far. A word of advise, don't drill all of the holes at the same time that way if you unrepairably muck up you haven't wasted all of the wood. Marg OCtoolguy and cashew 1 1 Quote Link to comment Share on other sites More sharing options...
daveww1 Posted April 2, 2020 Report Share Posted April 2, 2020 looks like it will be an amazing project OCtoolguy and cashew 2 Quote Link to comment Share on other sites More sharing options...
MrsN Posted April 2, 2020 Report Share Posted April 2, 2020 That is a really cool piece! Those lines are tiny! cashew and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted April 2, 2020 Report Share Posted April 2, 2020 12 hours ago, cashew said: When the blade gets dull I'm afraid to change atm -- need super control till the edge dulls a bit -- then its easier New small blades can be super aggressive. I saw a few strokes in oak to reduce the agressiveness. 2/0 and #1 blades try to run away on their own for me especially when I'm making a sharp turn. OCtoolguy, Badgerboy, amazingkevin and 1 other 1 3 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted April 2, 2020 Report Share Posted April 2, 2020 That is an awesome project. I might have to give it a try someday. Not yet, that's for sure. I'm still struggling with cutting a large circle. cashew 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted April 2, 2020 Report Share Posted April 2, 2020 (edited) This one looks like fun. Anybody? I think it might take half a lifetime just to drill all the holes. Edited April 2, 2020 by octoolguy cashew and amazingkevin 1 1 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted April 2, 2020 Report Share Posted April 2, 2020 I'd have to loose the few marbles I have left before attempting that. OCtoolguy, Gene Howe, amazingkevin and 2 others 1 4 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted April 2, 2020 Report Share Posted April 2, 2020 2 hours ago, Rockytime said: I'd have to loose the few marbles I have left before attempting that. Com on Les. It's just one cut at a time. Like walking. cashew 1 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted April 3, 2020 Report Share Posted April 3, 2020 I use a cane and walker for that. Would like racing stripes for the walker! cashew, OCtoolguy and amazingkevin 2 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted April 3, 2020 Report Share Posted April 3, 2020 29 minutes ago, Rockytime said: I use a cane and walker for that. Would like racing stripes for the walker! Well, the principle is still the same. One walker ahead of the cane. Rinse, repeat. cashew 1 Quote Link to comment Share on other sites More sharing options...
barb.j.enders Posted April 3, 2020 Report Share Posted April 3, 2020 Wow WoW and WOW! what an amazing pattern and what amazing cutting! cashew and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
cashew Posted April 14, 2020 Author Report Share Posted April 14, 2020 Just in case you maybe thought I broke it -- This is 24 hours into it meflick, amazingkevin and OCtoolguy 1 2 Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted April 14, 2020 Report Share Posted April 14, 2020 That is amazing. In looking back through the thread, I didn’t see size. What is the size? cashew and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted April 14, 2020 Report Share Posted April 14, 2020 (edited) I'd love to try some thing like that. And I may after I finish 3 other projects. You will make it. I find the modified geometry blades too aggressive for me on most thing, in fact I really only use them on 3D cutting. I do like the Pegas Skip Tooth blades thought and what I use most the time now. Please keep us posted. It is looking awesome. How big is it? Edited April 14, 2020 by Scrappile cashew 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.