jblock9907 Posted April 8, 2020 Report Posted April 8, 2020 In the WOOD magazine issue 236, nov 2015, there is a pattern for an AC130 gunship. I am building it for my Grandson. I have all the parts cut but my problem is with parts e and f. It is unclear how they are made. The legend gives dimensions but the drawing putting them on is different. Has anyone built this Gunship, if so, how did you work parts e & f. For those of us who have seen Puff in action, undesirable. Thank you Quote
dgman Posted April 8, 2020 Report Posted April 8, 2020 Once upon a time, Wood Magazine had a very active forum, including a scroll saw forum. I haven’t seen a Wood Magazine for years so I can’t help you there, but you might write them with your question. Good luck! Quote
WayneMahler Posted April 8, 2020 Report Posted April 8, 2020 Looks to me that "F" goes between the two parts of "E" . In between the two parts of "E" there looks to be a rod for the front wheel, and the drawing shows holes to accept it. That rod attaches the front landing gear to the plane. The whole assembly gets attached to the bottom of part "H" . I hope this makes sense to you. If not let me know and I'll see what I can do for you. Best of luck. amazingkevin 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.