nickp Posted May 25, 2020 Report Share Posted May 25, 2020 1 minute ago, Rockytime said: I see Walker Turner floor drill presses on craigslist occasionally. The are pretty pricey or would own one! A friend of mine needed a portable table saw...I gave him a Skil I wasn't using...he gave me the Walker that he was no longer using for mortises. He had upgraded to the Jet mortiser...I think I walked away with the better deal... OCtoolguy and Rockytime 1 1 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted May 26, 2020 Author Report Share Posted May 26, 2020 22 minutes ago, nickp said: A friend of mine needed a portable table saw...I gave him a Skil I wasn't using...he gave me the Walker that he was no longer using for mortises. He had upgraded to the Jet mortiser...I think I walked away with the better deal... You certainly did! OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted May 26, 2020 Report Share Posted May 26, 2020 I have never seen this drill press before. It sure appears to be made well. Nice when you find a tool that works really well for you, Enjoy it for a long time Dick heppnerguy Rockytime and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
Woodmaster1 Posted May 28, 2020 Report Share Posted May 28, 2020 I have an extra craftsman motor from that age if you lived in the area instead couple of thousand miles away it would be yours for pickup. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted May 28, 2020 Author Report Share Posted May 28, 2020 27 minutes ago, Woodmaster1 said: I have an extra craftsman motor from that age if you lived in the area instead couple of thousand miles away it would be yours for pickup. That would be a very generous offer.I bought a used 1/2hp motor from a salvage yard where my friend works. Since the mounting holes on the used motor did not match the Atlas motor plate my friend made an adapter plate which worked fine. The motor had four wires coming out of it which I did not know what to do with. I took it to a motor repair shop near where I live and wanted a line cord wired into it. The owner said we should see if it runs. He plugged it in and immediately it started heating up . It was drawing more than four amps. That shot that idea. This morning I took the old motor to the shop. He said I can repair anything if you can afford to pay for it. He will give me an estimate in a week or so. Irregardless what it will cost I will have the original motor back on the drill. That will be great! OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Woodmaster1 Posted May 28, 2020 Report Share Posted May 28, 2020 Sounds like an awesome fix except for the potential cost. Good luck! OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted May 29, 2020 Report Share Posted May 29, 2020 That cheap drill press is about to get pricey. I hope they give you a break on the repair. Probably not. Quote Link to comment Share on other sites More sharing options...
Rockytime Posted May 29, 2020 Author Report Share Posted May 29, 2020 6 minutes ago, octoolguy said: That cheap drill press is about to get pricey. I hope they give you a break on the repair. Probably not. I guess it's only money. I've blown lots of money over 80 plus years on things I have not regretted. At this point in my life I don't worry much. My wife is taken care of should I pass first. My two daughters have more money than I ever had so all is good. Don't want to be foolish but at the same time we don't skimp on much. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted May 29, 2020 Report Share Posted May 29, 2020 32 minutes ago, Rockytime said: I guess it's only money. I've blown lots of money over 80 plus years on things I have not regretted. At this point in my life I don't worry much. My wife is taken care of should I pass first. My two daughters have more money than I ever had so all is good. Don't want to be foolish but at the same time we don't skimp on much. Excellent frame of mind Les. Nothing to worry about. Just live. Quote Link to comment Share on other sites More sharing options...
Rockytime Posted July 4, 2020 Author Report Share Posted July 4, 2020 Well, I got the bad news on my drill motor. It needs a complete rewinding which will go well over my $200 limit. Back to looking for a motor. I'll try to find an original otherwise I will have to purchase an modern motor which means making an adapter plate as the Atlas motor mount is no longer standard. Also it just won't look right. I could buy a new drill for the same money but would have to change out the cheap, crap chuck. Besides I love old iron. Bummed! OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted July 4, 2020 Report Share Posted July 4, 2020 (edited) 19 hours ago, Rockytime said: Well, I got the bad news on my drill motor. It needs a complete rewinding which will go well over my $200 limit. Back to looking for a motor. I'll try to find an original otherwise I will have to purchase an modern motor which means making an adapter plate as the Atlas motor mount is no longer standard. Also it just won't look right. I could buy a new drill for the same money but would have to change out the cheap, crap chuck. Besides I love old iron. Bummed! You might consider "shopping" around for a better price Les. There has to be more than one motor shop. Or another idea is to put a "want to buy" on eBay with all the specs of your motor and sit back and wait to see if one comes up. I see lots of old parts on there all the time. You could build a complete "old" bandsaw from parts on there but it would cost a fortune to do it that way. Worth a try though. Send me the info and I'll see what I can find. Edited July 4, 2020 by octoolguy Quote Link to comment Share on other sites More sharing options...
Rockytime Posted July 4, 2020 Author Report Share Posted July 4, 2020 I'm getting more quotes. I have to retrieve my motor Monday and get the motor details of of it so I can shop it around. An electrician friend of mine thinks the quote is pretty close. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted July 5, 2020 Report Share Posted July 5, 2020 5 hours ago, Rockytime said: I'm getting more quotes. I have to retrieve my motor Monday and get the motor details of of it so I can shop it around. An electrician friend of mine thinks the quote is pretty close. To me nowadays, everything sounds expensive. Fixed income sucks! Rockytime 1 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted July 17, 2020 Author Report Share Posted July 17, 2020 Today I got my drill working. I purchased a 1/3 hp motor and made an adapter plate for mounting. working beautifully. I'm back in business! OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted July 17, 2020 Report Share Posted July 17, 2020 14 hours ago, Rockytime said: Today I got my drill working. I purchased a 1/3 hp motor and made an adapter plate for mounting. working beautifully. I'm back in business! That's great news Les. Now, go drill a hole! Rockytime 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.