Popular Post amazingkevin Posted April 23, 2020 Popular Post Report Share Posted April 23, 2020 (edited) Been wanting to do this a long time. And next time it will be bigger. This baby,s a full 16.5" x 10.5/8" in 1/4" 3 ply plywood cabinet backer I found or salvaged. I spent a lot of time sanding and detailing but the finish coat raised all the slivers everywhere.cut with FDScroll reverse #3 blade. Good practise piece. I spent my extra time in 3 or 4 days and cut till tired. Rattle can primer & top coat. Edited April 23, 2020 by amazingkevin Pictures tony coleman, Scrolling Steve, flarud and 13 others 15 1 Quote Link to comment Share on other sites More sharing options...
Tomanydogs Posted April 23, 2020 Report Share Posted April 23, 2020 Kevin that looks great. Well done. amazingkevin 1 Quote Link to comment Share on other sites More sharing options...
alexfox Posted April 23, 2020 Report Share Posted April 23, 2020 Looks great! amazingkevin 1 Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted April 24, 2020 Author Report Share Posted April 24, 2020 4 hours ago, Tomanydogs said: Kevin that looks great. Well done. Thank you so much Irene!!! Lots of dedicated scrolling here!!! Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted April 24, 2020 Author Report Share Posted April 24, 2020 3 hours ago, alexfox said: Looks great! Whoa!!! One of SSV,s best took an eyeball of my work !!! That makes me smile!!! Thank you Alex!!! Quote Link to comment Share on other sites More sharing options...
OzarkSawdust Posted April 24, 2020 Report Share Posted April 24, 2020 Real fine job Kevin! I've eyeballed that one too...didn't think I could ever get through it. You made a real nice piece there. amazingkevin 1 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted April 24, 2020 Report Share Posted April 24, 2020 I've looked at that pattern often. You did a great job of cutting! amazingkevin 1 Quote Link to comment Share on other sites More sharing options...
wombatie Posted April 24, 2020 Report Share Posted April 24, 2020 Awesome work Kevin, well done. Marg amazingkevin 1 Quote Link to comment Share on other sites More sharing options...
flarud Posted April 24, 2020 Report Share Posted April 24, 2020 Looks great! I have that pattern and will cut it one day. Every time someone cuts it, it makes me wanna go straight out to the shop and fire up the scroll saw! amazingkevin 1 Quote Link to comment Share on other sites More sharing options...
daveww1 Posted April 24, 2020 Report Share Posted April 24, 2020 awesome job amazingkevin 1 Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted April 24, 2020 Author Report Share Posted April 24, 2020 13 hours ago, OzarkSawdust said: Real fine job Kevin! I've eyeballed that one too...didn't think I could ever get through it. You made a real nice piece there. It was a fun piece to do thank you.try it you,LL like it!!! Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted April 24, 2020 Author Report Share Posted April 24, 2020 13 hours ago, Rockytime said: I've looked at that pattern often. You did a great job of cutting! Thank you Les, were both motorcycle buffs so that helped doing this one. Man the detail BOTAS got from the bike!!! Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted April 24, 2020 Author Report Share Posted April 24, 2020 10 hours ago, wombatie said: Awesome work Kevin, well done. Marg Thanks Marg!!! You and hubby would have a ball being seen on this rascal tooling around town!!! Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted April 24, 2020 Author Report Share Posted April 24, 2020 9 hours ago, flarud said: Looks great! I have that pattern and will cut it one day. Every time someone cuts it, it makes me wanna go straight out to the shop and fire up the scroll saw! Yes ,thanks friend!!! I,ve been teased too many times seeing this and had to put my foot down and just do it. Next time I,LL try it 20" long!!! I like motorcycles!!! Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted April 24, 2020 Author Report Share Posted April 24, 2020 2 hours ago, daveww1 said: awesome job Whoa!!! Thanks daveww1!!! I would love to twist the wick on this one more than once. Quote Link to comment Share on other sites More sharing options...
Fedido Posted April 24, 2020 Report Share Posted April 24, 2020 Just when I think I am making strides, you show off some of your work and put me back in place. . Well done! amazingkevin 1 Quote Link to comment Share on other sites More sharing options...
Dragonkort Posted April 25, 2020 Report Share Posted April 25, 2020 that is fantastic!!! i love seeing all the work you people do.... for some reason when im doing fret work on baltic burch if its got to many inside cuts...it sort of splinters if you know what i mean...and if i try to make cuts that are real close together i find that i often have a problem with pieces breaking off.... i try to always stack cut when im doing fret on baltic burch in the hopes that the layers won't splinter and i wont break off any pieces... is there some kind of trick to this that the books havent told me about? these problems are the main reason i dont try to cut more complex and challanging work. if i have these problems with the simpler stuff im afraid trying something harder would be a disaster. just woundering. amazingkevin 1 Quote Link to comment Share on other sites More sharing options...
dgman Posted April 25, 2020 Report Share Posted April 25, 2020 Something different Kevin, you did a great a Job! amazingkevin 1 Quote Link to comment Share on other sites More sharing options...
namunolie Posted April 25, 2020 Report Share Posted April 25, 2020 great work~~ amazingkevin 1 Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted April 26, 2020 Author Report Share Posted April 26, 2020 22 hours ago, dgman said: Something different Kevin, you did a great a Job! Thanks Dan. I know I show too many names I do and have wore my fingers out scrolling them, it this is one I could not pass up any longer. The back tire thrilled me so much that I had to do it. I picture myself on this bike doing a stand still 360 degree donut standing up on the pegs with the front brake on smoking the back tire as it slowly makes it,s turn around!!! I like all my fun on bikes at slow speeds less than 100 mph. Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted April 26, 2020 Author Report Share Posted April 26, 2020 (edited) On 4/24/2020 at 7:40 PM, Fedido said: Just when I think I am making strides, you show off some of your work and put me back in place. . Well done! No worry,s Dan!!! I need to be in a zone to tackle something like this.I really needed to do this to unwind from doing quick and easy stuff. I did learn a lot with the #3 blade is that pieces are cut gently with this fine tooth blade. So breakage is at a bare minimum in close proximity of other cuts!!! Edited July 20, 2020 by amazingkevin spelling Fedido 1 Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted April 26, 2020 Author Report Share Posted April 26, 2020 On 4/24/2020 at 8:44 PM, Dragonkort said: that is fantastic!!! i love seeing all the work you people do.... for some reason when im doing fret work on baltic burch if its got to many inside cuts...it sort of splinters if you know what i mean...and if i try to make cuts that are real close together i find that i often have a problem with pieces breaking off.... i try to always stack cut when im doing fret on baltic burch in the hopes that the layers won't splinter and i wont break off any pieces... is there some kind of trick to this that the books havent told me about? these problems are the main reason i dont try to cut more complex and challanging work. if i have these problems with the simpler stuff im afraid trying something harder would be a disaster. just woundering. Hi Dragonkort, I just learned why pieces break off. Too coarse of a blade like a #5#7#9' blades is to aggressive!!! Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted April 26, 2020 Author Report Share Posted April 26, 2020 18 hours ago, namunolie said: great work~~ Thank you for looking Namunolie!!! namunolie 1 Quote Link to comment Share on other sites More sharing options...
Fedido Posted April 26, 2020 Report Share Posted April 26, 2020 You are proving why I love scrolling, always something to learn and crosstalk is flowing! amazingkevin 1 Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted April 26, 2020 Author Report Share Posted April 26, 2020 5 hours ago, Fedido said: You are proving why I love scrolling, always something to learn and crosstalk is flowing! Sir yes sir, I learned all I know right here in the forums, !!! Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.