penquin Posted April 26, 2020 Report Share Posted April 26, 2020 well done Kevin, looks super. jim amazingkevin 1 Quote Link to comment Share on other sites More sharing options...
Fedido Posted April 26, 2020 Report Share Posted April 26, 2020 7 hours ago, amazingkevin said: Sir yes sir, I learned all I know right here in the forums, !!! I can say the same too! amazingkevin 1 Quote Link to comment Share on other sites More sharing options...
rdatelle Posted April 27, 2020 Report Share Posted April 27, 2020 WoW Kevin. You outdid yourself with your hidden talent. Looks great. Do you ever use a sanding mop for things like that. I use mine all the time when I have a lot of fibers popping up. Works great. amazingkevin 1 Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted April 28, 2020 Author Report Share Posted April 28, 2020 On 4/26/2020 at 12:52 PM, penquin said: well done Kevin, looks super. jim Thanks Jim, I could use a remark like that today!!! Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted April 28, 2020 Author Report Share Posted April 28, 2020 3 hours ago, rdatelle said: WoW Kevin. You outdid yourself with your hidden talent. Looks great. Do you ever use a sanding mop for things like that. I use mine all the time when I have a lot of fibers popping up. Works great. I even torched the fuzzys and it was so clean but a top coat opened a can of worms for me Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted April 28, 2020 Author Report Share Posted April 28, 2020 Just now, amazingkevin said: I even torched the fuzzys and it was so clean but a top coat opened a can of worms for me Thanks Ralph!!! Quote Link to comment Share on other sites More sharing options...
tony coleman Posted April 28, 2020 Report Share Posted April 28, 2020 Wow, lovely cutting,very detailed, On my to do list amazingkevin 1 Quote Link to comment Share on other sites More sharing options...
Fred Kile Posted April 28, 2020 Report Share Posted April 28, 2020 I have done only one motorcycle and found it a pleasant challenge. I like design you've chosen and you've done a super job. amazingkevin 1 Quote Link to comment Share on other sites More sharing options...
Woodrush Posted April 29, 2020 Report Share Posted April 29, 2020 On 4/23/2020 at 3:57 PM, amazingkevin said: Been wanting to do this a long time. And next time it will be bigger. This baby,s a full 16.5" x 10.5/8" in 1/4" 3 ply plywood cabinet backer I found or salvaged. I spent a lot of time sanding and detailing but the finish coat raised all the slivers everywhere.cut with FDScroll reverse #3 blade. Good practise piece. I spent my extra time in 3 or 4 days and cut till tired. Rattle can primer & top coat. Great job Quote Link to comment Share on other sites More sharing options...
Dragonkort Posted April 29, 2020 Report Share Posted April 29, 2020 well thanks kevin!! now all I have to do is buy some smaller blades lol i'll have to look on line and see where I can get some, only place around here that sells them s johnsons work bench and I do believe there closed now. Most of the people here in mic( or at least those I know and have heard from are NOT happy that pretty much everything is closed) A friend of mine went to meyjers and Walmart and they were only allowed to go into the section of the store that had food in it... she was going to pick up some yarn for me a few odds and ends for her. she was not happy!!! I mean really if im already in the store, and your only letting like 35 people in the store at a time...I don't think im in or causing anyone else more danger then when I was in the food section... but its not a nessary item.... gezzz ! amazingkevin 1 Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted April 30, 2020 Author Report Share Posted April 30, 2020 7 hours ago, Woodrush said: Great job Thank you Brent!!! It was fun in steps !!! Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted April 30, 2020 Author Report Share Posted April 30, 2020 5 hours ago, Dragonkort said: well thanks kevin!! now all I have to do is buy some smaller blades lol i'll have to look on line and see where I can get some, only place around here that sells them s johnsons work bench and I do believe there closed now. Most of the people here in mic( or at least those I know and have heard from are NOT happy that pretty much everything is closed) A friend of mine went to meyjers and Walmart and they were only allowed to go into the section of the store that had food in it... she was going to pick up some yarn for me a few odds and ends for her. she was not happy!!! I mean really if im already in the store, and your only letting like 35 people in the store at a time...I don't think im in or causing anyone else more danger then when I was in the food section... but its not a nessary item.... gezzz ! Strange times for sure!!! Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.