hotshot Posted May 21, 2020 Report Share Posted May 21, 2020 (edited) 2 hours ago, Rolf said: .... Typically I run a 5/8 Infinity resaw blade.... One of these days I'm going to have to convice you to run a Carbide. Seem like all blades cut like butter, and are a joy right out of the box. All blades I've tried, including Infinity seems to get out of the butter phase pretty quickly when re-sawing. The Carbides cost a lot more, but give you a much longer windows of butter cutting. For impatient me, it seems like when I have to exert any significant amount of force, the blades start doing their own thing, and the consistency and smoothness suffers. And some pieces of wood have demons in them and try to drag the blade all over, which is very frustrating, but much less so with a larger Kerf blade. Here is a cross link to the old SSWC thread on this: https://forum.scrollsawer.com/forum/scroll-saw/tools-and-blades/834886-lenox-trimaster-high-end-carbide-bandsaw-blade For those of you that didn't see it back when that thread was active, check it out to see my awesome (or maybe adequate) phone photography skills . . . . . You can also see some comparison cuts. Edited May 21, 2020 by hotshot OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Rolf Posted May 22, 2020 Report Share Posted May 22, 2020 Randy thanks for the reminder! I will certainly order one. What is your current source? Also what tooth count and blade width are you running? OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Woodmaster1 Posted May 23, 2020 Report Share Posted May 23, 2020 I have a 1/2" carbide tip blade for resawing and it is fantastic. I purchased it from Highland Woodworking. I see getting at least 3or4 years use out of it. I am on year 3 and still going strong. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
hotshot Posted May 23, 2020 Report Share Posted May 23, 2020 14 hours ago, Rolf said: Randy thanks for the reminder! I will certainly order one. What is your current source? Also what tooth count and blade width are you running? Hmmm, had to go look as I've not had to re-order for some time. The blade is 3/4" and looks to be 3 tpi Lenox trimetal. My last order was from Industrial Blade (1-800-729-2523) ------Randy OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
DME72 Posted June 4, 2020 Author Report Share Posted June 4, 2020 (edited) just got a supercut bandsaw blade for my delta 14 inch saw. went with the 1/2 3 hook gold blade premium gold carbide blade. man the blade cuts cherry like butter.only made a few cuts but hopeful the blade holds up for a while.they are only about $30 on amazon. does anybody else run this blade? if so how long will it last. doug Edited June 4, 2020 by DME72 OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.