Oges Posted June 15, 2020 Report Posted June 15, 2020 Received two bits of Corian today, they were sold as Knife Handle Scales They measure 13.5cm (5 1/4 inch) x 5cm (2 inch) and 12mm (1/2 inch) thick, what blade size and type would be best to use on this? I have seen a previous post that recommends wearing a mask Not sure what I'm going to make with them yet, perhaps keyrings or something amazingkevin and wombatie 2 Quote
NC Scroller Posted June 15, 2020 Report Posted June 15, 2020 I would use a skip tooth blade vs a reverse tooth blade. The size blade will depend on the pattern but in general I am thinking a #3 or #5.. Oges 1 Quote
Oges Posted June 16, 2020 Author Report Posted June 16, 2020 14 hours ago, NC Scroller said: I would use a skip tooth blade vs a reverse tooth blade. The size blade will depend on the pattern but in general I am thinking a #3 or #5.. Thank you, shall give that a try Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.