GrampaJim Posted June 28, 2020 Report Share Posted June 28, 2020 I have not seen this before. Hegner now has a drum sander. https://advanced-machinery.myshopify.com/products/hegner-tws-230-drum-sander?variant=31753413525570 OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
dgman Posted June 28, 2020 Report Share Posted June 28, 2020 Look like a sandflee. Just a bit expensive but might pay for itself if you do production work like a few of us do. Why don’t you buy one Jim and let us know how you like it! GrampaJim, John B, OCtoolguy and 2 others 5 Quote Link to comment Share on other sites More sharing options...
GrampaJim Posted June 28, 2020 Author Report Share Posted June 28, 2020 1 hour ago, dgman said: Look like a sandflee. Just a bit expensive but might pay for itself if you do production work like a few of us do. Why don’t you buy one Jim and let us know how you like it! It is tempting, but I will be a nice guy and let you go first. OCtoolguy and John B 1 1 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted June 29, 2020 Report Share Posted June 29, 2020 You could buy me one and I'll tell you how good it works, Not really, lol I doubt I'd use something like that.. I'd like a drum sander.. but I'm talking about the open end deal so I could sand a whole board that would be wider than my planer.. GrampaJim, John B and OCtoolguy 3 Quote Link to comment Share on other sites More sharing options...
Woodmaster1 Posted June 29, 2020 Report Share Posted June 29, 2020 I will keep my 16/32 supermax drum sander it works great. OCtoolguy, John B and Dave Monk 3 Quote Link to comment Share on other sites More sharing options...
John B Posted June 29, 2020 Report Share Posted June 29, 2020 Looks like a Sand Flea to me3. It's a little pricey, considering you can get an18" open ended one for about $900. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
BadBob Posted June 29, 2020 Report Share Posted June 29, 2020 A Sand-Flee clone for sure. But cheaper. Sand-Flee sanders have been out of stock for a long time. OCtoolguy, GrampaJim and John B 3 Quote Link to comment Share on other sites More sharing options...
NC Scroller Posted June 29, 2020 Report Share Posted June 29, 2020 For us non metric folks the sanding drum is only 9" wide. Really a big negative in my book. Dave Monk, John B and OCtoolguy 3 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted July 1, 2020 Report Share Posted July 1, 2020 I'm going to try my hand at making my own. Someday. John B and Dave Monk 2 Quote Link to comment Share on other sites More sharing options...
John B Posted July 2, 2020 Report Share Posted July 2, 2020 5 hours ago, octoolguy said: I'm going to try my hand at making my own. Someday. I was in the same boat for many years. I collected heaps of stuff including a jogging machine, thinking it would all make a great sander and it probably would have, but when one came on special for about $450, I thought "Bugger it" and dropped the cash. GrampaJim and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
rustynail Posted July 2, 2020 Report Share Posted July 2, 2020 (edited) You can make your own and get the drum and such from this company... http://stockroomsupply.ca/shop/ under flatmaster sander Edited July 2, 2020 by rustynail Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.