Popular Post OzarkSawdust Posted July 8, 2020 Popular Post Report Share Posted July 8, 2020 I cut this Russ Beard pattern today. 1/8 Baltic Birch ply. First time I cut something with Pegas 2/0 spirals that didn't end up in the trash! But I only had 2 blades left, that I had abused before, and they broke. Finished Charlie's coat with a #1 Pegas. frankorona, amazingkevin, Charlie E and 8 others 11 Quote Link to comment Share on other sites More sharing options...
wombatie Posted July 8, 2020 Report Share Posted July 8, 2020 I have no idea who Charlie Daniels is but you did a great job of the portrait. Well done. Marg OzarkSawdust 1 Quote Link to comment Share on other sites More sharing options...
John B Posted July 8, 2020 Report Share Posted July 8, 2020 He'll be kicking that Devils arse again Nice cutting. I often use both flat and spiral blades, just for that sort of thing. Long straight, looping cuts the flat lots of twists and turns = Spiral amazingkevin and OzarkSawdust 1 1 Quote Link to comment Share on other sites More sharing options...
Tomanydogs Posted July 8, 2020 Report Share Posted July 8, 2020 Well done. OzarkSawdust 1 Quote Link to comment Share on other sites More sharing options...
daveww1 Posted July 8, 2020 Report Share Posted July 8, 2020 great job OzarkSawdust 1 Quote Link to comment Share on other sites More sharing options...
OzarkSawdust Posted July 8, 2020 Author Report Share Posted July 8, 2020 8 hours ago, wombatie said: I have no idea who Charlie Daniels is but you did a great job of the portrait. Well done. Marg He was a well known country singer. And a fantastic fiddle player. If you like country music go on You Tube and listen to a few of his songs. Thanks for the complement! wombatie and amazingkevin 2 Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted July 8, 2020 Report Share Posted July 8, 2020 All that black makes everything stand out that much more ,Super job!!! OzarkSawdust 1 Quote Link to comment Share on other sites More sharing options...
OzarkSawdust Posted July 8, 2020 Author Report Share Posted July 8, 2020 8 hours ago, John B said: He'll be kicking that Devils arse again Nice cutting. I often use both flat and spiral blades, just for that sort of thing. Long straight, looping cuts the flat lots of twists and turns = Spiral He surely will! Thanks for the complement! I started the first cut with a Pegas #1 MG that was in the saw. Then I thought I would give "the Devil's blade" aka spiral another try. Usually it eats everything it touches and I throw it in the trash, but I got it to behave...mostly. I only had the 2 blades left so I cut the tight stuff first and when the last blade broke the only thing left to do was his coat. I'll order some today. The only ones I've tried were 2/0. Is there any other sizes that work well? Or is a larger size easier to learn spiral cutting? John B 1 Quote Link to comment Share on other sites More sharing options...
OzarkSawdust Posted July 8, 2020 Author Report Share Posted July 8, 2020 13 minutes ago, amazingkevin said: All that black makes everything stand out that much more ,Super job!!! Thanks Kevin! Yea, I thought it looked pretty cool also. I might have to frame this one. Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted July 8, 2020 Report Share Posted July 8, 2020 2 hours ago, OzarkSawdust said: Thanks Kevin! Yea, I thought it looked pretty cool also. I might have to frame this one. That's going to be a conversation piece on your wall of fame OzarkSawdust 1 Quote Link to comment Share on other sites More sharing options...
ike Posted July 8, 2020 Report Share Posted July 8, 2020 charlies Daniel's Outdoor shows severl years back. It was a Good show there was also a good show. but there swas a good show in the back . there was 2 different Cycle clubs there and of corse you get the, When you get 2 different clubs togather it ends up with a good fight, So we got 2 showes in the smed night. IKE OzarkSawdust 1 Quote Link to comment Share on other sites More sharing options...
dgman Posted July 8, 2020 Report Share Posted July 8, 2020 Nice work Gary, it looks just like him! OzarkSawdust 1 Quote Link to comment Share on other sites More sharing options...
OzarkSawdust Posted July 8, 2020 Author Report Share Posted July 8, 2020 2 hours ago, dgman said: Nice work Gary, it looks just like him! Thanks Dan! This one coming out OK inspired me to try spirals more. So I ordered some from Denny today! Quote Link to comment Share on other sites More sharing options...
John B Posted July 22, 2020 Report Share Posted July 22, 2020 On 7/8/2020 at 10:29 PM, OzarkSawdust said: He surely will! Thanks for the complement! I started the first cut with a Pegas #1 MG that was in the saw. Then I thought I would give "the Devil's blade" aka spiral another try. Usually it eats everything it touches and I throw it in the trash, but I got it to behave...mostly. I only had the 2 blades left so I cut the tight stuff first and when the last blade broke the only thing left to do was his coat. I'll order some today. The only ones I've tried were 2/0. Is there any other sizes that work well? Or is a larger size easier to learn spiral cutting? I have a supply of #1, 2 and 3's. spirals. Depending upon how fine the cut is or the width of the lines as to which blade I use. Just have fun OzarkSawdust 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.