OzarkSawdust Posted July 22, 2020 Report Share Posted July 22, 2020 I made a dispenser for my peal and stick shelf paper today. Steve Good pattern, 1/2" Blond plywood, Oak fixtures, and a poplar dowel rod. Finished the Oak with spray semi-gloss Lacquer. I think this will be real handy...it looks like a "Good" idea...I know, bad joke. frankorona, Dave Monk, John B and 3 others 6 Quote Link to comment Share on other sites More sharing options...
jollyred Posted July 22, 2020 Report Share Posted July 22, 2020 You are going to like that cutter. I made one from his pattern, with a few modifications, and use it regularly. My change was to make the cutting platform shorter, for easier storage. I also used an aluminum bar for the cutting guide. I know how easy it is for me to damage a wood straight edge with a sharp knife. Tom amazingkevin and OzarkSawdust 2 Quote Link to comment Share on other sites More sharing options...
Gonzo Posted July 22, 2020 Report Share Posted July 22, 2020 I like it! I may have to look into making that OzarkSawdust and amazingkevin 2 Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted July 22, 2020 Report Share Posted July 22, 2020 I have a need for this, Thanks for posting!!!! OzarkSawdust 1 Quote Link to comment Share on other sites More sharing options...
wombatie Posted July 22, 2020 Report Share Posted July 22, 2020 Oh that is a Good idea. Well done. Marg OzarkSawdust 1 Quote Link to comment Share on other sites More sharing options...
John B Posted July 22, 2020 Report Share Posted July 22, 2020 A great idea and nice looking job. Just a thought, I do occasionally have good ones. This may or may not be that time Placing a hack saw blade on the wood strip with the teeth just proud so you would not need to cut the paper. You could then hang it on a wall. Just thinking out loud. RabidAlien and OzarkSawdust 2 Quote Link to comment Share on other sites More sharing options...
daveww1 Posted July 22, 2020 Report Share Posted July 22, 2020 nice job OzarkSawdust 1 Quote Link to comment Share on other sites More sharing options...
OzarkSawdust Posted July 22, 2020 Author Report Share Posted July 22, 2020 7 hours ago, John B said: A great idea and nice looking job. Just a thought, I do occasionally have good ones. This may or may not be that time Placing a hack saw blade on the wood strip with the teeth just proud so you would not need to cut the paper. You could then hang it on a wall. Just thinking out loud. It's not really "paper" John. Don't know if you've used it down under, but it's a clear plastic like laminate. Not sure if it would cut on a hack saw blade like a roll of paper does...but it's a good idea that I may try ! John B 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.